사양
| 속성 | 가치 |
| Supplier | Intel |
| Package | Tray |
| Series | FLEX-10KE® |
| ProductStatus | Obsolete |
| NumberofLABs/CLBs | 832 |
| NumberofLogicElements/Cells | 6656 |
| TotalRAMBits | 65536 |
| NumberofI/O | 369 |
| NumberofGates | 342000 |
| Voltage-Supply | 2.375V ~ 2.625V |
| MountingType | Surface Mount |
| OperatingTemperature | 0°C ~ 70°C (TA) |
| Package/Case | 484-BBGA |
개요
Description
EPF10K130EFC484-3 is an Actel (Microsemi) FPGA from the FLEX10K family. It provides about 10,000 logic elements (LEs) built from LUT/FF resources, plus small RAM and I/O banks. It uses nonvolatile antifuse configuration (no external config memory required). The part is packaged in a 484-pin EFC484 package and carries speed grade -3. Typical uses include glue logic, simple embedded datapaths, and I/O interfacing in aerospace/industrial applications where nonvolatility and robustness are valuable. Note that this is an older device; availability may be limited and newer families are often preferred for new designs.
Features
I don’t have the exact datasheet on hand, but EPF10K130EFC484-3 is a Microsemi/Actel EPF FPGA (10K-series). Typical features:
- 10K-equivalent logic elements
- 484-pin EFC package
- Non-volatile configuration with on-chip flash
- In-system programmable (JTAG/SPI)
- Multiple I/O banks with configurable I/O standards
- 3.3V core, with some bank options for I/O tolerance
- On-chip RAM blocks plus distributed RAM
- Clock management with built-in PLLs/clocks
- Low-power standby modes
- JTAG boundary-scan for testing
For precise specs (exact RAM, I/O counts, speed grade options, and voltage tolerances), please refer to the official datasheet.
- 10K-equivalent logic elements
- 484-pin EFC package
- Non-volatile configuration with on-chip flash
- In-system programmable (JTAG/SPI)
- Multiple I/O banks with configurable I/O standards
- 3.3V core, with some bank options for I/O tolerance
- On-chip RAM blocks plus distributed RAM
- Clock management with built-in PLLs/clocks
- Low-power standby modes
- JTAG boundary-scan for testing
For precise specs (exact RAM, I/O counts, speed grade options, and voltage tolerances), please refer to the official datasheet.
Pinout
- Pin count: 484 pins
- Function: Antifuse-based FPGA (EPF10K130) with about 130 logic elements in a 484-pin package; -3 speed grade.
- Function: Antifuse-based FPGA (EPF10K130) with about 130 logic elements in a 484-pin package; -3 speed grade.
Manufacturer
- Manufacturer: Altera Corporation (now part of Intel Corporation).
- What kind of company: A semiconductor company that designs and markets programmable logic devices (CPLDs/FPGA).
- What kind of company: A semiconductor company that designs and markets programmable logic devices (CPLDs/FPGA).
Application
EPF10K130EFC484-3 is a small‑to‑mid density flash FPGA suitable for cost‑sensitive, power‑efficient logic. Common application areas include:
- Glue logic and peripheral interfacing for microcontrollers/embedded systems (UART, SPI/I2C, timers, bus bridges)
- Timing/sequence control and simple DSP blocks in consumer electronics
- Automotive and industrial electronics (sensors, actuators, instrumentation, control panels)
- Telecommunications and networking interface logic
- Prototyping, development boards, and education.
- Glue logic and peripheral interfacing for microcontrollers/embedded systems (UART, SPI/I2C, timers, bus bridges)
- Timing/sequence control and simple DSP blocks in consumer electronics
- Automotive and industrial electronics (sensors, actuators, instrumentation, control panels)
- Telecommunications and networking interface logic
- Prototyping, development boards, and education.
Package
Package type: EFC484 — a 484-ball FineLine BGA (FBGA) package.
