FTLF1217P2BTL

FTLF1217P2BTL refers to a specific type of optical transceiver module used in networking equipment to enable high-speed data transmission over fiber optic cables. These modules are typically designed for use in data centers, telecommunication networks, and other environments where reliable and fast data communication is critical.
The "FTLF" in the model name indicates that it is manufactured by Finisar, a well-known company in the optical components industry. The numbers "1217" usually denote specific features such as the wavelength and data rate capabilities of the transceiver. The "P2BTL" part of the label likely specifies the transceiver's additional features, such as its physical form factor, range capabilities, and intended application (e.g., short-range or long-range communication).
These transceivers are integral in upgrading network infrastructures to support higher bandwidth demands, offering efficient and scalable solutions for modern networking challenges. As with other optical modules, they are hot-pluggable, meaning they can be inserted into or removed from a device without needing to power it down, adding flexibility to network management.

The FTLF1217P2BTL is a 10Gbps SFP+ optical transceiver. Equivalent products include:
1. Finisar FTLF8519P3BNL
2. Cisco SFP-10G-SR
3. Juniper EX-SFP-10GE-SR
4. Avago AFBR-709DMZ
5. Brocade 10GE-SFPP-SR
These transceivers offer similar functionality for short-range, high-speed data communication over multimode fiber, typically used in data centers and networking environments. Always verify compatibility with specific equipment and network requirements.

The FTLF1217P2BTL is a fiber optic transceiver module designed for high-speed data communication. Key features include:
1. Data Rate: Supports up to 1.25 Gbps for Gigabit Ethernet applications.
2. Wavelength: Operates at a wavelength of 1310 nm, suitable for short to medium distance communication.
3. Distance: Capable of reaching distances up to 10 km over single-mode fiber.
4. Compatibility: Compliant with IEEE 802.3ah 1000BASE-LX standard.
5. Interface: Features an LC duplex connector for optical fiber connection.
6. Temperature Range: Designed to operate within a commercial temperature range (0°C to 70°C).
7. Diagnostics: Supports Digital Diagnostics Monitoring (DDM) for real-time parameter monitoring.
8. Power Supply: Requires a 3.3V power supply.
9. Form Factor: Utilizes a standard Small Form-factor Pluggable (SFP) design for flexibility and ease of use.
10. Hot-Pluggable: Allows for easy installation and replacement without shutting down the system.
These features make the FTLF1217P2BTL a reliable choice for network professionals seeking efficient and durable transceiver solutions.

The FTLF1217P2BTL is an optical transceiver module used for high-speed data communication applications. It typically adheres to the Small Form-factor Pluggable (SFP) standard, which means it includes an electrical edge connector with 20 pins. These pins serve various functions, including power supply, data transmission, and status signaling. The module supports full-duplex communication and is often used in networking equipment like switches and routers for fiber optic communication.
Key functions include:
- Data Transmission and Reception: Handles both transmitting and receiving of optical signals.
- Power Supply: Pins dedicated to providing power to the module.
- Control and Monitoring: Pins for digital diagnostics and control signals, which allow for real-time monitoring of parameters like temperature and signal strength.
For detailed pin definitions and exact electrical specifications, consulting the manufacturer's datasheet or technical documentation is recommended.

The FTLF1217P2BTL is manufactured by Finisar Corporation. Finisar is a technology company that specializes in optical communication components and subsystems. It provides solutions for high-speed data communications and telecommunications applications, often focusing on products such as transceivers, active optical cables, and other optical components that facilitate the transmission of data over fiber optic networks. Finisar serves a variety of sectors including data centers, telecommunications, and enterprise markets, offering products that enable high-performance, reliable, and efficient data transfer.

The FTLF1217P2BTL is a fiber optic transceiver module typically used in high-speed data communication applications. It is designed for use in 100G Ethernet and InfiniBand EDR (Enhanced Data Rate) networks. These modules are commonly deployed in data centers, enterprise networking environments, and telecommunication systems to facilitate high-bandwidth data transfer over long distances. They support multi-mode fiber and are suitable for high-performance computing applications, large-scale data processing, and cloud computing infrastructures. Additionally, they are used in network equipment such as switches, routers, and storage systems to ensure efficient and reliable data transmission.

The FTLF1217P2BTL is a transceiver module, specifically designed for optical communication applications. It typically comes in an SFP (Small Form-factor Pluggable) package type, which is a compact, hot-swappable transceiver used for both telecommunication and data communications applications.