사양
| 속성 | 가치 |
| Supplier | GigaDevice Semiconductor (HK) Limited |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Part Status | Not For New Designs |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NOR |
| Memory Size | 64Mb (8M x 8) |
| Memory Interface | SPI - Quad I/O |
| Clock Frequency | 120 MHz |
| Write Cycle Time - Word Page | 2.4ms |
| Voltage - Supply | 1.65V ~ 2V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
개요
Description
GD25LQ64CSIGR is a 64‑Mbit serial flash memory from GigaDevice. It uses SPI (standard, Dual, and Quad I/O modes) and comes in an 8‑pin package (IGR suffix indicates RoHS lead‑free packaging). Operating voltage is typically 2.7–3.6 V. It supports high‑speed read and Quad I/O read, as well as page program writes and erase commands (sector/block/chip erase). It includes a Write Enable Latch, status register, and a deep power‑down mode for low power. Endurance is typical of serial flash (program/erase cycles), making it suitable for firmware/code storage, boot ROM, and data storage in MCUs, microprocessors, and SoCs. For exact timing, command set, pinout, and electrical characteristics, refer to the GD25LQ64CSIGR datasheet.
Equivalent
Equivalent parts (64-Mbit SPI flash, 3.3V, similar pinout) include:
- Winbond W25Q64FV / W25Q64JV
- Macronix MX25L6435F (MX25L6435D)
- ISSI IS25LP064A
- Micron N25Q064A
- Spansion S25FL064K
- Puya P25Q64H
Note: verify timing, voltage range, and package; cross-reference datasheets for exact command compatibility.
- Winbond W25Q64FV / W25Q64JV
- Macronix MX25L6435F (MX25L6435D)
- ISSI IS25LP064A
- Micron N25Q064A
- Spansion S25FL064K
- Puya P25Q64H
Note: verify timing, voltage range, and package; cross-reference datasheets for exact command compatibility.
Features
Key features of GD25LQ64CSIGR:
- 64 Mbit (8 MB) serial flash memory.
- 2.7–3.6 V operating supply.
- SPI-compatible interface with Dual I/O and Quad I/O read modes.
- Up to 104 MHz in SPI/dual/quad modes for high throughput.
- 256-byte page size; 4 KB sectors; 64 KB blocks.
- 3-byte addressing supports the full 64 Mbit without mandatory 4-byte mode.
- Deep power-down mode and fast wake-up.
- Hardware write-protect with sector/block protection features; status/security options.
- Industrial temperature range: −40 °C to 85 °C.
- Package: 8-pin SOP (GR denotes RoHS-compliant).
Applications: code/firmware storage, updates, data logging, embedded systems.
- 64 Mbit (8 MB) serial flash memory.
- 2.7–3.6 V operating supply.
- SPI-compatible interface with Dual I/O and Quad I/O read modes.
- Up to 104 MHz in SPI/dual/quad modes for high throughput.
- 256-byte page size; 4 KB sectors; 64 KB blocks.
- 3-byte addressing supports the full 64 Mbit without mandatory 4-byte mode.
- Deep power-down mode and fast wake-up.
- Hardware write-protect with sector/block protection features; status/security options.
- Industrial temperature range: −40 °C to 85 °C.
- Package: 8-pin SOP (GR denotes RoHS-compliant).
Applications: code/firmware storage, updates, data logging, embedded systems.
Pinout
- Pin count: 8 pins (SOP-8/SOIC-8).
- Function: 64 Mbit serial NOR flash memory with SPI interface (non-volatile storage for code/data). Uses standard SPI read/write/erase commands.
- Typical pinout (orientation may vary):
1 = CS#,
2 = DO (MISO),
3 = WP#,
4 = GND,
5 = DI (MOSI),
6 = CLK,
7 = VCC,
8 = HOLD#.
Note: WP# and HOLD# can be tied high if not used.
- Function: 64 Mbit serial NOR flash memory with SPI interface (non-volatile storage for code/data). Uses standard SPI read/write/erase commands.
- Typical pinout (orientation may vary):
1 = CS#,
2 = DO (MISO),
3 = WP#,
4 = GND,
5 = DI (MOSI),
6 = CLK,
7 = VCC,
8 = HOLD#.
Note: WP# and HOLD# can be tied high if not used.
Manufacturer
- Manufacturer: GigaDevice Semiconductor Inc. (GigaDevice)
- What kind of company: A fabless semiconductor company based in Beijing, China, specializing in flash memory and microcontroller products; designs memory ICs (e.g., NOR serial flash) and outsources fabrication to foundries.
- What kind of company: A fabless semiconductor company based in Beijing, China, specializing in flash memory and microcontroller products; designs memory ICs (e.g., NOR serial flash) and outsources fabrication to foundries.
Application
Applications of GD25LQ64CSIGR (64‑Mbit serial flash):
- External program/firmware memory for MCUs/MPUs; boot code and firmware updates
- Data storage and logging in IoT, wearables, and industrial equipment
- Parameter/config storage in automotive and industrial controllers
- Firmware images for consumer electronics and networking gear
- Field upgrades and secure firmware deployment via SPI/QSPI interfaces
- Cache or scratchpad memory in MCUs requiring fast random reads
These uses leverage its QPI/dual/quad SPI interfaces for high‑performance non-volatile storage.
- External program/firmware memory for MCUs/MPUs; boot code and firmware updates
- Data storage and logging in IoT, wearables, and industrial equipment
- Parameter/config storage in automotive and industrial controllers
- Firmware images for consumer electronics and networking gear
- Field upgrades and secure firmware deployment via SPI/QSPI interfaces
- Cache or scratchpad memory in MCUs requiring fast random reads
These uses leverage its QPI/dual/quad SPI interfaces for high‑performance non-volatile storage.
Package
GD25LQ64CSIGR uses an 8-pin SOIC package (SOP-8).
