이미지는 참조용입니다.
HMC3716LP4ETR
+BOMIC RF DETECT 10MHZ-1.3GHZ 24QFN
-
제조업체아날로그 디바이스(주)
-
제조업체 부품 #HMC3716LP4ETR
-
재고2461
365 1일 품질 보증
7*24 영업 시간 서비스 보증
90-판매 후 1일 보증
정품 보증
사양
| 속성 | 가치 |
| Part Status | Active |
| Base Product Number | HMC3716 |
| Frequency | 10MHz ~ 1.3GHz |
| Input Range | -10dBm ~ 5dBm |
| Voltage - Supply | 5V |
| Current - Supply | 115 mA |
| Mounting Type | Surface Mount |
| Package | 24-VFQFN Exposed Pad |
| Supplier Device Package | 24-QFN (4x4) |
| Packaging | Cut Tape (CT), Tape & Reel (TR) |
개요
Description
HMC3716LP4ETR is a high-frequency GaAs MMIC RF IC from Hittite (now Analog Devices) intended for RF/microwave front-end use. It is packaged in a small 4-lead plastic (LP4) package shipped in tape-and-reel (ETR). The device is designed to be integrated into wireless, radar, and test instrumentation front-ends and can function as a gain/ buffering element or mixer, depending on the surrounding circuitry. It requires external biasing and careful RF matching; layout should use 50-ohm interfaces and short, well-grounded paths. For exact frequency range, gain, noise figure, linearity (IP3), power consumption, pinout, and recommended matching networks, consult the official datasheet and evaluation boards from Analog Devices.
Features
I don’t have the exact datasheet memorized. Key features you’ll typically see for HMC3716LP4ETR include:
- 50-ohm matched RF input and output
- GaAs MMIC device in a 4-lead leadless LP4 package (LP4ETR)
- RoHS-compliant, tape-and-reel packaging
- Suitable for microwave/RF front-end applications
For exact performance figures (gain, noise figure, IIP3/P1dB, biasing, supply voltage/current, operating temp), please share the datasheet or allow me to fetch it and extract the precise specs.
- 50-ohm matched RF input and output
- GaAs MMIC device in a 4-lead leadless LP4 package (LP4ETR)
- RoHS-compliant, tape-and-reel packaging
- Suitable for microwave/RF front-end applications
For exact performance figures (gain, noise figure, IIP3/P1dB, biasing, supply voltage/current, operating temp), please share the datasheet or allow me to fetch it and extract the precise specs.
Pinout
Pin count: 4 pins.
Function: A broadband RF limiter/diode-based MMIC in an LP4 package, used for RF input protection in the front end. (Tape-and-reel packaging: ETR.)
Function: A broadband RF limiter/diode-based MMIC in an LP4 package, used for RF input protection in the front end. (Tape-and-reel packaging: ETR.)
Manufacturer
Manufacturer: Analog Devices, Inc. (AD). It is a global semiconductor company that designs and manufactures analog, mixed-signal, and RF/microwave integrated circuits. The HMC3716LP4ETR originates from Hittite Microwave, which AD acquired in 2014.
Application
Typical application areas for HMC3716LP4ETR:
- RF/microwave front-end modules in wireless communications (cellular, Wi‑Fi, point‑to‑point)
- Receivers/transceivers and front-end subsystems
- Downconversion/upconversion stages (mixers, LO interfaces)
- Radar and surveillance systems (military, automotive)
- Satellite communication and telemetry
- Test and measurement equipment (signal generators, spectrum analyzers)
- RF/microwave front-end modules in wireless communications (cellular, Wi‑Fi, point‑to‑point)
- Receivers/transceivers and front-end subsystems
- Downconversion/upconversion stages (mixers, LO interfaces)
- Radar and surveillance systems (military, automotive)
- Satellite communication and telemetry
- Test and measurement equipment (signal generators, spectrum analyzers)
Package
Leadless Plastic Package (LP4): a 4-lead leadless package; RoHS-compliant, Tape-and-Reel (ETR).
