사양
| 속성 | 가치 |
| Supplier | ISSI, Integrated Silicon Solution Inc |
| Package | Tray |
| Series | Automotive, AEC-Q100 |
| ProductStatus | Active |
| MemoryType | Non-Volatile |
| MemoryFormat | FLASH |
| Technology | FLASH - NOR |
| MemorySize | 32Mb (4M x 8) |
| MemoryInterface | SPI - Quad I/O, QPI, DTR |
| ClockFrequency | 133 MHz |
| WriteCycleTime-WordPage | 800µs |
| Voltage-Supply | 2.3V ~ 3.6V |
| OperatingTemperature | -40°C ~ 125°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 8-SOIC (0.209, 5.30mm Width) |
개요
Description
IS25LP032D-JBLA3 is a 32-Mbit SPI serial flash memory from ISSI (Integrated Silicon Solution, Inc.). It’s designed for non-volatile storage of firmware and data in embedded systems, with low-power operation.
Key points:
- Density and interface: 32 Mbit (4 MB) SPI flash; standard SPI interface and supports faster reads (and dual/quad IO reads on compatible modes).
- Voltage and temp: operates at 2.7–3.6 V; temperature range typically -40 to 85 °C (industrial grade variant).
- Organization and access: 256-byte page program; sector erases (commonly 4 KB), block erases (64 KB/256 KB), and full-chip erase.
- Features: fast read, deep power-down, hold and write-protect (WP#) options; status register to monitor WIP (write-in-progress).
- Package: commonly 8-pin options (e.g., SOIC8/USON); JBLA3 denotes the specific packaging/temperature option.
- Applications: boot code, firmware storage, and data logging in microcontroller and embedded systems.
For exact electrical specs, timing, and package details, refer to the official IS25LP032D-JBLA3 datasheet from ISSI.
Key points:
- Density and interface: 32 Mbit (4 MB) SPI flash; standard SPI interface and supports faster reads (and dual/quad IO reads on compatible modes).
- Voltage and temp: operates at 2.7–3.6 V; temperature range typically -40 to 85 °C (industrial grade variant).
- Organization and access: 256-byte page program; sector erases (commonly 4 KB), block erases (64 KB/256 KB), and full-chip erase.
- Features: fast read, deep power-down, hold and write-protect (WP#) options; status register to monitor WIP (write-in-progress).
- Package: commonly 8-pin options (e.g., SOIC8/USON); JBLA3 denotes the specific packaging/temperature option.
- Applications: boot code, firmware storage, and data logging in microcontroller and embedded systems.
For exact electrical specs, timing, and package details, refer to the official IS25LP032D-JBLA3 datasheet from ISSI.
Equivalent
Common cross-references (32-Mbit, 3V SPI Flash):
- Winbond W25Q32JV / W25Q32BV
- Macronix MX25L3206E (MX25L3206)
- GigaDevice GD25Q32E (GD25Q32C)
- Puya P25Q32H
Note: check exact supply voltage, package, and timing; cross-reference tables in the IS25LP032D datasheet may shift suffixes.
- Winbond W25Q32JV / W25Q32BV
- Macronix MX25L3206E (MX25L3206)
- GigaDevice GD25Q32E (GD25Q32C)
- Puya P25Q32H
Note: check exact supply voltage, package, and timing; cross-reference tables in the IS25LP032D datasheet may shift suffixes.
Features
IS25LP032D-JBLA3 features (concise):
- Density: 32‑Mbit Serial Flash (4 MB)
- Supply voltage: 2.7–3.6 V
- Interface: SPI with Dual I/O and Quad I/O modes
- Speed: up to ~104 MHz clock; fast read
- Organization: 256‑byte page; 4 KB sectors; 64 KB blocks
- Operations: Page Program (256 bytes); Sector/Block/Chip Erase; Write Enable/Disable
- Security/Protection: block protection, WP/HOLD features; status register controls
- Endurance/Data retention: ≈100k P/E cycles per sector; >20 years data retention
- Power modes: deep power-down and standard standby
- Temperature (industrial): typically -40 to 85 °C
- Package: JBLA3 (8‑pin) footprint
Note: exact timing/erase times vary by command and operating conditions; confirm with the datasheet for your layout.
- Density: 32‑Mbit Serial Flash (4 MB)
- Supply voltage: 2.7–3.6 V
- Interface: SPI with Dual I/O and Quad I/O modes
- Speed: up to ~104 MHz clock; fast read
- Organization: 256‑byte page; 4 KB sectors; 64 KB blocks
- Operations: Page Program (256 bytes); Sector/Block/Chip Erase; Write Enable/Disable
- Security/Protection: block protection, WP/HOLD features; status register controls
- Endurance/Data retention: ≈100k P/E cycles per sector; >20 years data retention
- Power modes: deep power-down and standard standby
- Temperature (industrial): typically -40 to 85 °C
- Package: JBLA3 (8‑pin) footprint
Note: exact timing/erase times vary by command and operating conditions; confirm with the datasheet for your layout.
Pinout
- Pin count: 8 pins (8-pin package such as SOIC-8).
- Function: IS25LP032D-JBLA3 is a 32-Mbit serial Flash memory with SPI/QSPI interface for storing firmware/data.
- Function: IS25LP032D-JBLA3 is a 32-Mbit serial Flash memory with SPI/QSPI interface for storing firmware/data.
Manufacturer
- Manufacturer: Integrated Silicon Solution, Inc. (ISSI).
- What kind of company: A semiconductor company that designs and manufactures memory ICs, including serial NOR flash, SRAM, and DRAM for consumer, automotive, and industrial electronics.
- What kind of company: A semiconductor company that designs and manufactures memory ICs, including serial NOR flash, SRAM, and DRAM for consumer, automotive, and industrial electronics.
Application
IS25LP032D-JBLA3 is a 32-Mbit serial flash memory. Common application areas include:
- Firmware/boot code storage for microcontrollers and SoCs
- Program and data memory for automotive ECUs and industrial controllers
- IoT devices and wearables for firmware storage and non-volatile logging
- Networking equipment (routers, gateways, modems) for firmware/config storage
- Consumer electronics (printers, set‑top boxes, digital cameras) for code and data
- FPGA/SoC configuration memory and auxiliary data storage
These uses leverage non-volatile, high-speed serial flash with Quad/SPI interfaces.
- Firmware/boot code storage for microcontrollers and SoCs
- Program and data memory for automotive ECUs and industrial controllers
- IoT devices and wearables for firmware storage and non-volatile logging
- Networking equipment (routers, gateways, modems) for firmware/config storage
- Consumer electronics (printers, set‑top boxes, digital cameras) for code and data
- FPGA/SoC configuration memory and auxiliary data storage
These uses leverage non-volatile, high-speed serial flash with Quad/SPI interfaces.
Package
It uses an 8-pin SOP (SOIC-8) package; RoHS-compliant.
