사양
| 속성 | 가치 |
| Supplier | onsemi,Rochester Electronics, LLC |
| Package | Tape & Reel (TR),Cut Tape (CT),Bulk |
| ProductStatus | Active |
| Type | General Purpose |
| NumberofElements | 2 |
| Voltage-SupplySingle/Dual(±) | 2V ~ 36V, ±1V ~ 18V |
| Voltage-InputOffset(Max) | 5mV @ 5V |
| Current-InputBias(Max) | 0.25µA @ 5V |
| Current-Output(Typ) | 16mA @ 5V |
| Current-Quiescent(Max) | 1mA |
| OperatingTemperature | 0°C ~ 70°C |
| Package/Case | 8-SOIC (0.154, 3.90mm Width) |
| MountingType | Surface Mount |
개요
Description
LM393EDR2G is Texas Instruments’ LM393 dual voltage comparator in an RoHS-compliant 8-pin EDR package. It contains two independent comparators with open-collector outputs, designed for low-power threshold and level-detection tasks on a single supply.
Key points:
- Two comparators, open-collector outputs (need pull-up resistors to Vcc)
- Supply range: 2–36 V; input common-mode includes ground
- Quick switching (propagation delay in the microsecond range, depending on conditions)
- Temperature range typically -40°C to +125°C
- Package: 8-pin, RoHS-compliant (EDR variant)
Typical usage:
- Connect Vcc to your supply, GND to ground
- Inputs to the signals you want to compare
- Outputs require pull-ups to your logic level
- Pinout (8-pin package): 1 = Output A, 2 = In− A, 3 = In+ A, 4 = GND, 5 = In+ B, 6 = In− B, 7 = Output B, 8 = Vcc
Applications include battery monitoring, level sensing, window detectors, and zero-crossing circuits.
Key points:
- Two comparators, open-collector outputs (need pull-up resistors to Vcc)
- Supply range: 2–36 V; input common-mode includes ground
- Quick switching (propagation delay in the microsecond range, depending on conditions)
- Temperature range typically -40°C to +125°C
- Package: 8-pin, RoHS-compliant (EDR variant)
Typical usage:
- Connect Vcc to your supply, GND to ground
- Inputs to the signals you want to compare
- Outputs require pull-ups to your logic level
- Pinout (8-pin package): 1 = Output A, 2 = In− A, 3 = In+ A, 4 = GND, 5 = In+ B, 6 = In− B, 7 = Output B, 8 = Vcc
Applications include battery monitoring, level sensing, window detectors, and zero-crossing circuits.
Equivalent
Common equivalents to LM393EDR2G (dual open-collector comparator, 2–36 V):
- LM2903 (dual comparator; widely used as a drop-in substitute)
- LM393 in other TI packages (e.g., LM393DR, LM393N, etc.)
- Other vendors’ TI-compatible LM393 clones (check DigiKey/ Mouser cross-references)
- LM2903 (dual comparator; widely used as a drop-in substitute)
- LM393 in other TI packages (e.g., LM393DR, LM393N, etc.)
- Other vendors’ TI-compatible LM393 clones (check DigiKey/ Mouser cross-references)
Features
Here are the key features of the LM393EDR2G:
- Dual, independent voltage comparators
- Open-collector outputs (need external pull-up resistors)
- Wide supply range: 2 V to 36 V
- Input common-mode range includes ground (suitable for single-supply)
- Outputs can sink current and support wired-AND logic
- Low power / suitable for battery-powered applications
- Wide operating temperature: -40°C to +125°C
- Available in common packages (e.g., 8-pin SIP/SOIC), with no built-in hysteresis (not a Schmitt trigger) (external hysteresis possible)
- Dual, independent voltage comparators
- Open-collector outputs (need external pull-up resistors)
- Wide supply range: 2 V to 36 V
- Input common-mode range includes ground (suitable for single-supply)
- Outputs can sink current and support wired-AND logic
- Low power / suitable for battery-powered applications
- Wide operating temperature: -40°C to +125°C
- Available in common packages (e.g., 8-pin SIP/SOIC), with no built-in hysteresis (not a Schmitt trigger) (external hysteresis possible)
Pinout
Pin count: 8 pins (8-pin package such as SOIC/DIP).
Function: LM393EDR2G is a dual voltage comparator with open-collector outputs. It contains two independent comparators (V+ vs V−) and outputs that sink current to ground; requires pull-up resistors. Can operate from single or dual supply within the datasheet range.
Function: LM393EDR2G is a dual voltage comparator with open-collector outputs. It contains two independent comparators (V+ vs V−) and outputs that sink current to ground; requires pull-up resistors. Can operate from single or dual supply within the datasheet range.
Manufacturer
- Manufacturer: Texas Instruments (TI).
- What kind of company: TI is an American multinational technology company that designs and manufactures semiconductors and integrated circuits, specializing in analog and mixed-signal ICs and embedded processors. It is one of the world's largest semiconductor companies.
- What kind of company: TI is an American multinational technology company that designs and manufactures semiconductors and integrated circuits, specializing in analog and mixed-signal ICs and embedded processors. It is one of the world's largest semiconductor companies.
Application
LM393EDR2G is a dual comparator (open-collector outputs). Common applications include:
- Battery/ power-supply monitoring: under/over-voltage protection
- Threshold and window detectors (two comparators for a window)
- Zero-cross detectors for AC switching and triac/relay drive
- Level shifting and signal conditioning for microcontroller inputs
- Relay/LED/motor drive interfaces using open-collector outputs
- Sensor conditioning (thermistors, photodiodes, Hall sensors) with hysteresis
These use cases leverage its wide supply range, fast response, and open-collector outputs.
- Battery/ power-supply monitoring: under/over-voltage protection
- Threshold and window detectors (two comparators for a window)
- Zero-cross detectors for AC switching and triac/relay drive
- Level shifting and signal conditioning for microcontroller inputs
- Relay/LED/motor drive interfaces using open-collector outputs
- Sensor conditioning (thermistors, photodiodes, Hall sensors) with hysteresis
These use cases leverage its wide supply range, fast response, and open-collector outputs.
Package
LM393EDR2G comes in an 8-pin surface-mount package: SOIC-8 (SOP-8), RoHS/Pb-free.
