사양
| 속성 | 가치 |
| Package | Tape & Reel (TR) |
| ProductStatus | Obsolete |
| Type | Hot Swap Controller |
| NumberofChannels | 1 |
| InternalSwitch(s) | No |
| Applications | General Purpose |
| Features | Latched Fault |
| ProgrammableFeatures | Current Limit, Fault Timeout, OVP, UVLO |
| Voltage-Supply | 9V ~ 80V |
| OperatingTemperature | -40°C ~ 125°C |
| Current-Supply | 1.3 mA |
| MountingType | Surface Mount |
| Package/Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
개요
Description
The LM5069MMX-1 is a TI DC-DC buck regulator controller from the LM5069 family. It’s designed to convert higher automotive/industrial input voltages to lower rails for power-management in embedded systems. The MMX-1 suffix specifies a particular package/revision variant.
Key points:
- Wide input range suitable for automotive/industrial environments (exact max voltage per datasheet).
- Current‑mode PWM control for stable, efficient buck operation.
- Feedback-based output regulation with soft-start, enable/shutdown, and protection features (overcurrent/thermal).
- Flexible switching frequency and general-purpose usage with either an external MOSFET configuration (or internal options depending on variant).
Typical uses:
- Point‑of‑load regulators in vehicles and industrial equipment.
- Power rails for microcontrollers, sensors, and peripherals from 12/24V systems.
Note: exact specs (input range, topology, package pinout) vary by revision. See the TI LM5069MMX-1 datasheet and product page for precise numbers.
Key points:
- Wide input range suitable for automotive/industrial environments (exact max voltage per datasheet).
- Current‑mode PWM control for stable, efficient buck operation.
- Feedback-based output regulation with soft-start, enable/shutdown, and protection features (overcurrent/thermal).
- Flexible switching frequency and general-purpose usage with either an external MOSFET configuration (or internal options depending on variant).
Typical uses:
- Point‑of‑load regulators in vehicles and industrial equipment.
- Power rails for microcontrollers, sensors, and peripherals from 12/24V systems.
Note: exact specs (input range, topology, package pinout) vary by revision. See the TI LM5069MMX-1 datasheet and product page for precise numbers.
Features
I don’t have the exact datasheet in front of me, but the LM5069MMX-1 (TI LM5069 family) typically includes:
- Wide input range (up to ~60 V)
- Multiphase/synchronous buck regulator controller
- PWM current‑mode control with programmable compensation
- Programmable output voltage via external resistor network
- Adjustable switching frequency (hundreds of kHz)
- Soft‑start with optional tracking
- Enable input and power‑good/status signaling
- Protection: overcurrent/short‑circuit, overvoltage, undervoltage, thermal shutdown
- Fault/diagnostic outputs
- Remote sense and voltage‑drop compensation
- Small MMX package for compact designs
For exact numbers and pinout, please refer to the LM5069MMX‑1 datasheet.
- Wide input range (up to ~60 V)
- Multiphase/synchronous buck regulator controller
- PWM current‑mode control with programmable compensation
- Programmable output voltage via external resistor network
- Adjustable switching frequency (hundreds of kHz)
- Soft‑start with optional tracking
- Enable input and power‑good/status signaling
- Protection: overcurrent/short‑circuit, overvoltage, undervoltage, thermal shutdown
- Fault/diagnostic outputs
- Remote sense and voltage‑drop compensation
- Small MMX package for compact designs
For exact numbers and pinout, please refer to the LM5069MMX‑1 datasheet.
Pinout
- Pin count: 8 pins (8-pin package).
- Function: LM5069MMX-1 is a high-side hot-swap/current‑limit controller. It drives an external N‑channel MOSFET to limit inrush current and protect a power rail from faults/shorts, with features such as adjustable current limit and fault indication (via a fault/status output).
- Function: LM5069MMX-1 is a high-side hot-swap/current‑limit controller. It drives an external N‑channel MOSFET to limit inrush current and protect a power rail from faults/shorts, with features such as adjustable current limit and fault indication (via a fault/status output).
Manufacturer
- Manufacturer: Texas Instruments (TI).
- Type of company: American multinational technology company that designs and manufactures semiconductors and integrated circuits, specializing in analog and power-management devices; one of the world’s largest semiconductor producers.
- Type of company: American multinational technology company that designs and manufactures semiconductors and integrated circuits, specializing in analog and power-management devices; one of the world’s largest semiconductor producers.
Application
LM5069MMX-1 is a high-voltage, multi-mode switching regulator/LED driver. Typical applications:
- LED lighting systems (constant-current LED driver, dimmable)
- High-voltage DC-DC converters in consumer/industrial power supplies (buck/boost/buck-boost)
- Automotive power management and load switching with protection
- Battery charging and energy-management in portable/industrial equipment
Concise and broad coverage for its power-management/LED-driver capabilities.
- LED lighting systems (constant-current LED driver, dimmable)
- High-voltage DC-DC converters in consumer/industrial power supplies (buck/boost/buck-boost)
- Automotive power management and load switching with protection
- Battery charging and energy-management in portable/industrial equipment
Concise and broad coverage for its power-management/LED-driver capabilities.
Package
LM5069MMX-1 is in an 8-pin MSOP package (MSOP-8).
