이미지는 참조용입니다.
LPC54102J512BD64QL
+BOMIC MCU 32BIT 512KB FLASH 64LQFP
-
제조업체은지포미국주식회사
-
제조업체 부품 #LPC54102J512BD64QL
-
재고7133
365 1일 품질 보증
7*24 영업 시간 서비스 보증
90-판매 후 1일 보증
정품 보증
사양
| 속성 | 가치 |
| Series | LPC54100 |
| PartStatus | Active |
| BaseProductNumber | LPC54102 |
| DigiKeyProgrammable | Not Verified |
| CoreProcessor | ARM® Cortex®-M4/M0+ |
| CoreSize | 32-Bit Dual-Core |
| Speed | 100MHz |
| Connectivity | I2C, SPI, UART/USART |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| NumberofI/O | 50 |
| ProgramMemorySize | 512KB (512K x 8) |
| ProgramMemoryType | FLASH |
| RAMSize | 104K x 8 |
| Voltage-Supply(Vcc/Vdd) | 1.62V ~ 3.6V |
| DataConverters | A/D 12x12b |
| OscillatorType | Internal |
| OperatingTemperature | -40°C ~ 105°C (TA) |
| MountingType | Surface Mount |
| SupplierDevicePackage | 64-LQFP (10x10) |
| Package | 64-LQFP |
| Packaging | Tray |
개요
Description
Introduction to LPC54102J512BD64QL
The LPC54102J512BD64QL is an NXP MCU from the LPC5410x family. It uses an ARM Cortex-M4F core, capable of up to about 120 MHz, with DSP and floating-point support. It includes on-chip memory of 512 KB flash and 64 KB RAM (configurations vary by package) and comes in a 64-pin package (BD64QL).
Peripherals cover a broad set typical for LPC5410x devices: UART/USART, I2C, SPI, analog interfaces (ADCs and a DAC), PWM, and timers with flexible GPIO. It supports multiple low-power modes for energy-efficient operation and provides boot ROM for reliable startup.
Ideal use cases include embedded control, motor drives, and IoT/sensor applications that need moderate processing power, memory, and low power consumption. Development is supported by NXP MCUXpresso/SDK, with GCC Arm toolchains and SWD/JTAG debugging.
The LPC54102J512BD64QL is an NXP MCU from the LPC5410x family. It uses an ARM Cortex-M4F core, capable of up to about 120 MHz, with DSP and floating-point support. It includes on-chip memory of 512 KB flash and 64 KB RAM (configurations vary by package) and comes in a 64-pin package (BD64QL).
Peripherals cover a broad set typical for LPC5410x devices: UART/USART, I2C, SPI, analog interfaces (ADCs and a DAC), PWM, and timers with flexible GPIO. It supports multiple low-power modes for energy-efficient operation and provides boot ROM for reliable startup.
Ideal use cases include embedded control, motor drives, and IoT/sensor applications that need moderate processing power, memory, and low power consumption. Development is supported by NXP MCUXpresso/SDK, with GCC Arm toolchains and SWD/JTAG debugging.
Features
Key features of LPC54102J512BD64QL (LPC54102 family):
- CPU: ARM Cortex-M4F core with FPU, up to 80 MHz
- Memory: 512 KB Flash; ~64 KB RAM
- USB: USB 2.0 Full-Speed device
- Peripherals: multiple UARTs/USART, SPI, I2C, I2S; PWM and timers
- Analog: 12-bit ADC with multiple channels; on-chip analog features
- LCD: LCD controller interface for simple displays
- DMA and CRC hardware engine
- Debug/ boot: SWD/JTAG debug; boot from flash
- Power: wide supply range (typ. 1.8–3.6 V), low-power modes and sleep options
- Package: 64-pin LQFP (BD64)
- Software: supported by LPCOpen/MCUXpresso ecosystem
Note: exact RAM size and peripheral counts can vary by package/revision; consult the datasheet for precise specs.
- CPU: ARM Cortex-M4F core with FPU, up to 80 MHz
- Memory: 512 KB Flash; ~64 KB RAM
- USB: USB 2.0 Full-Speed device
- Peripherals: multiple UARTs/USART, SPI, I2C, I2S; PWM and timers
- Analog: 12-bit ADC with multiple channels; on-chip analog features
- LCD: LCD controller interface for simple displays
- DMA and CRC hardware engine
- Debug/ boot: SWD/JTAG debug; boot from flash
- Power: wide supply range (typ. 1.8–3.6 V), low-power modes and sleep options
- Package: 64-pin LQFP (BD64)
- Software: supported by LPCOpen/MCUXpresso ecosystem
Note: exact RAM size and peripheral counts can vary by package/revision; consult the datasheet for precise specs.
Pinout
- Pin count: 64 pins (64-pin LQFP)
- Function: NXP LPC54102J512BD64QL is a 32-bit ARM Cortex-M4F microcontroller (LPC5410x family) with on-chip flash/RAM and embedded peripherals for general embedded control.
- Function: NXP LPC54102J512BD64QL is a 32-bit ARM Cortex-M4F microcontroller (LPC5410x family) with on-chip flash/RAM and embedded peripherals for general embedded control.
Manufacturer
- Manufacturer: NXP Semiconductors.
- Company type: A Dutch multinational semiconductor company that designs and manufactures integrated circuits and embedded processing solutions (e.g., microcontrollers, automotive electronics, security ICs) for various markets including automotive, industrial, and IoT.
- Company type: A Dutch multinational semiconductor company that designs and manufactures integrated circuits and embedded processing solutions (e.g., microcontrollers, automotive electronics, security ICs) for various markets including automotive, industrial, and IoT.
Application
Applications for LPC54102J512BD64QL include:
- Industrial motor control (BLDC/stepper) and drive systems
- Smart home/building automation (HVAC, lighting, appliances)
- Consumer electronics and audio DSP processing
- IoT edge devices, sensing, data acquisition and analytics
- Portable medical instrumentation and battery-powered devices
- Power tools and smart appliances requiring real-time embedded control and DSP tasks
- Industrial motor control (BLDC/stepper) and drive systems
- Smart home/building automation (HVAC, lighting, appliances)
- Consumer electronics and audio DSP processing
- IoT edge devices, sensing, data acquisition and analytics
- Portable medical instrumentation and battery-powered devices
- Power tools and smart appliances requiring real-time embedded control and DSP tasks
Package
It uses a 64-pin LQFP (lead quad flat package) — i.e., an LQFP-64 package.
