사양
| 속성 | 가치 |
| Package | Tray |
| Series | LPC546xx |
| ProductStatus | Active |
| CoreProcessor | ARM® Cortex®-M4 |
| CoreSize | 32-Bit Single-Core |
| Speed | 180MHz |
| Connectivity | CANbus, Ethernet, I²C, SPI, UART/USART, USB |
| Peripherals | Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT |
| NumberofI/O | 64 |
| ProgramMemorySize | 256KB (256K x 8) |
| ProgramMemoryType | FLASH |
| EEPROMSize | 16K x 8 |
| RAMSize | 136K x 8 |
| Voltage-Supply(Vcc/Vdd) | 1.71V ~ 3.6V |
| DataConverters | A/D 12x12b SAR |
| OscillatorType | Internal |
| OperatingTemperature | -40°C ~ 105°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 100-LQFP |
개요
Description
LPC54606J256BD100K is an NXP LPC5460x family 32-bit ARM Cortex‑M4F microcontroller. It targets embedded control and mixed‑signal applications, offering a high‑performance core with efficient power use. Key specs (typical): up to 100 MHz operation, 256 KB on‑chip flash, and 64 KB RAM. It includes a rich peripheral set (USB Full‑Speed, multiple serial interfaces (I2C/SPI/UART), ADCs/DACs, timers, PWM, GPIOs) and support for low‑power modes, making it suitable for USB devices, sensors/actuators, and compact IoT controllers. The -256 indicates 256 KB flash; -BD100K denotes the specific package/grade variant. This MCU is supported by MCUXpresso development tools. For exact pinout, memory map, and peripheral details, refer to the LPC54606J256BD100K datasheet and user manual.
Equivalent
Direct drop-in equivalents aren’t published. Within NXP, the closest equivalents are other LPC5460x devices that use the same 256 KB flash and 100-pin package. To confirm pin-for-pin compatibility and peripherals, use NXP’s cross-reference tool or consult the datasheet for the exact match.
Features
Concise features of LPC54606J256BD100K:
- 32-bit ARM Cortex-M4F MCU with DSP and FPU
- Up to 120 MHz operation
- 256 KB flash memory, ~64 KB RAM
- USB 2.0 Full-Speed device interface
- Multiple serial peripherals: I2C, SPI, UART/USART
- 12-bit ADC with multiple channels
- Timers and PWM/support for motor control
- DMA controller and CRC engine
- Memory Protection Unit (MPU), boot ROM and in-system/ In-application programming (IAP)
- Low-power modes with multiple wake sources
- Rich safety/standby features suitable for embedded applications
Note: specifics (RAM size, I/O counts, peripheral availability) can vary by package and revision; verify against the official datasheet for exact configuration.
- 32-bit ARM Cortex-M4F MCU with DSP and FPU
- Up to 120 MHz operation
- 256 KB flash memory, ~64 KB RAM
- USB 2.0 Full-Speed device interface
- Multiple serial peripherals: I2C, SPI, UART/USART
- 12-bit ADC with multiple channels
- Timers and PWM/support for motor control
- DMA controller and CRC engine
- Memory Protection Unit (MPU), boot ROM and in-system/ In-application programming (IAP)
- Low-power modes with multiple wake sources
- Rich safety/standby features suitable for embedded applications
Note: specifics (RAM size, I/O counts, peripheral availability) can vary by package and revision; verify against the official datasheet for exact configuration.
Pinout
- Pin count: 100 pins (BD100 package).
- Function: NXP LPC54606 series 32‑bit ARM Cortex‑M4F microcontroller (embedded MCU with onboard flash/RAM and peripherals for embedded applications).
- Function: NXP LPC54606 series 32‑bit ARM Cortex‑M4F microcontroller (embedded MCU with onboard flash/RAM and peripherals for embedded applications).
Manufacturer
- Manufacturer: NXP Semiconductors (NXP).
- What kind of company: A Dutch multinational semiconductor company that designs and manufactures microcontrollers, processors, sensors, and other embedded solutions for automotive, industrial, and consumer markets.
- What kind of company: A Dutch multinational semiconductor company that designs and manufactures microcontrollers, processors, sensors, and other embedded solutions for automotive, industrial, and consumer markets.
Application
Applications of LPC54606J256BD100K:
- Industrial automation and motor control (BLDC/stepper drives, servo systems)
- USB peripherals (audio, audio streaming, USB storage, HID)
- Human–machine interfaces (LCD/TFT displays, touch panels)
- Instrumentation, sensing, data acquisition and metering
- Embedded control for consumer products (appliances, HVAC, lighting)
- IoT/edge devices and gateways requiring local processing
- Audio DSP and voice-enabled devices
Supports DSP/FPU, LCD, USB, and multiple communication interfaces suitable for these areas.
- Industrial automation and motor control (BLDC/stepper drives, servo systems)
- USB peripherals (audio, audio streaming, USB storage, HID)
- Human–machine interfaces (LCD/TFT displays, touch panels)
- Instrumentation, sensing, data acquisition and metering
- Embedded control for consumer products (appliances, HVAC, lighting)
- IoT/edge devices and gateways requiring local processing
- Audio DSP and voice-enabled devices
Supports DSP/FPU, LCD, USB, and multiple communication interfaces suitable for these areas.
Package
A 100-pin LQFP package (LQFP-100, about 14×14 mm, 0.5 mm pitch).
