사양
| 속성 | 가치 |
| Package / Case | Tray |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Function | Step-Down |
| Output Configuration | Positive |
| Topology | Buck |
| Output Type | Adjustable |
| Number of Outputs | 1 |
| Voltage - Input (Min) | 3.1V |
| Voltage - Input (Max) | 20V |
| Voltage - Output (Min/Fixed) | 0.6V |
| Voltage - Output (Max) | 5.5V |
| Current - Output | 20A |
| Frequency - Switching | 1MHz |
| Synchronous Rectifier | Yes |
| Operating Temperature | -40°C ~ 150°C (TJ) |
| Mounting Type | Surface Mount |
개요
Description
LTC7150SJY-4#WPBF is a specific packaged variant of Analog Devices’ LTC7150 power-management IC. It belongs to the LTC7150 family, a high-voltage, primary-side regulated (PSR) flyback controller used to build isolated DC-DC converters. The suffixes SJY-4 and WPBF denote the exact package, variant, and RoHS/lead-free packaging of the part.
What it does (high level):
- Provides primary-side control for an isolated flyback converter, typically with startup, PWM control, and protection logic.
- Designed to work with an external transformer and feedback network to deliver isolated outputs.
- Includes protections (e.g., overcurrent/overtemperature/undervoltage) and soft-start to improve reliability.
Typical applications:
- Isolated telecom/data/industrial power supplies, automotive applications, and other power converters needing isolation.
What to check:
- Exact electrical specs, pinout, and mechanical package details from the official LTC7150 datasheet and the SJY-4/WPBF package drawing.
What it does (high level):
- Provides primary-side control for an isolated flyback converter, typically with startup, PWM control, and protection logic.
- Designed to work with an external transformer and feedback network to deliver isolated outputs.
- Includes protections (e.g., overcurrent/overtemperature/undervoltage) and soft-start to improve reliability.
Typical applications:
- Isolated telecom/data/industrial power supplies, automotive applications, and other power converters needing isolation.
What to check:
- Exact electrical specs, pinout, and mechanical package details from the official LTC7150 datasheet and the SJY-4/WPBF package drawing.
Features
Key features of LTC7150SJY-4#WPBF (quad hot‑swap controller in one package):
- Four independent hot‑swap channels in a single device; drives four external MOSFETs.
- Independent current‑limit per channel with programmable sense resistor.
- Programmable soft‑start and slew‑rate control to limit inrush.
- Per‑channel undervoltage lockout (UVLO) and overvoltage protection (OVP).
- Per‑channel overcurrent protection (hiccup or latch behavior configurable).
- Thermal protection with shutdown on excessive die temperature.
- Status/ fault reporting for each channel (fault flags and/or ready signals; global options may apply).
- Suitable for multi‑rail power‑distribution and safe hot‑swap insertion.
- RoHS-compliant WPBF package; SJY variant indicates specific package form factor.
- Drives external N‑channel MOSFETs; no internal high‑power FETs required.
- Low quiescent current for efficiency.
Note: For exact electrical specs (voltage range, current limits, timing, pinout), consult the LTC7150 datasheet.
- Four independent hot‑swap channels in a single device; drives four external MOSFETs.
- Independent current‑limit per channel with programmable sense resistor.
- Programmable soft‑start and slew‑rate control to limit inrush.
- Per‑channel undervoltage lockout (UVLO) and overvoltage protection (OVP).
- Per‑channel overcurrent protection (hiccup or latch behavior configurable).
- Thermal protection with shutdown on excessive die temperature.
- Status/ fault reporting for each channel (fault flags and/or ready signals; global options may apply).
- Suitable for multi‑rail power‑distribution and safe hot‑swap insertion.
- RoHS-compliant WPBF package; SJY variant indicates specific package form factor.
- Drives external N‑channel MOSFETs; no internal high‑power FETs required.
- Low quiescent current for efficiency.
Note: For exact electrical specs (voltage range, current limits, timing, pinout), consult the LTC7150 datasheet.
Pinout
- Pin count: 16 pins (package -WPBF is a 16‑lead device).
- Function: High‑voltage buck regulator controller with external MOSFET drive (switching regulator). It provides VIN, GND, LX/SW (switch node), BOOT, PHASE, FB, EN/RT/OSC, IS/ILIM, VREF/COMP, and other control pins for soft‑start, current limit, and regulation.
- Function: High‑voltage buck regulator controller with external MOSFET drive (switching regulator). It provides VIN, GND, LX/SW (switch node), BOOT, PHASE, FB, EN/RT/OSC, IS/ILIM, VREF/COMP, and other control pins for soft‑start, current limit, and regulation.
Manufacturer
- Manufacturer: Analog Devices, Inc. (ADI). It’s a multinational American semiconductor company that designs and manufactures analog, mixed-signal, and digital signal processing ICs and sensors (ADI acquired Linear Technology in 2017, which originally produced LTC parts).
Application
Typical application areas for LTC7150SJY-4#WPBF:
- Isolated DC-DC converters and power-management modules
- Industrial automation and motor-control front-ends
- Automotive electronics and EV/HEV power systems
- Data acquisition/sensor interfaces requiring galvanic isolation
- Telecom/datacom equipment and medical devices with isolation requirements
(Uses include high-voltage to low-voltage isolation, high-efficiency isolated power supplies, and systems demanding safety-critical isolation barriers.)
- Isolated DC-DC converters and power-management modules
- Industrial automation and motor-control front-ends
- Automotive electronics and EV/HEV power systems
- Data acquisition/sensor interfaces requiring galvanic isolation
- Telecom/datacom equipment and medical devices with isolation requirements
(Uses include high-voltage to low-voltage isolation, high-efficiency isolated power supplies, and systems demanding safety-critical isolation barriers.)
Package
8‑lead plastic SOIC (surface‑mount) Pb‑free package.
