사양
| 속성 | 가치 |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| ProductStatus | Active |
| MemoryType | Non-Volatile |
| MemoryFormat | EEPROM |
| Technology | EEPROM |
| MemorySize | 512Kb (64K x 8) |
| MemoryInterface | I²C |
| ClockFrequency | 1 MHz |
| WriteCycleTime-WordPage | 4ms |
| AccessTime | 450 ns |
| Voltage-Supply | 1.8V ~ 5.5V |
| OperatingTemperature | -40°C ~ 125°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 8-TSSOP (0.173, 4.40mm Width) |
개요
Description
The Introduction to M24512-DRDW3TP/K likely refers to a technical document or product specification for a specific component or system, possibly within electronics or computer hardware. The alphanumeric code M24512-DRDW3TP/K suggests a part number or model identifier, which is typically used by manufacturers to catalog and differentiate their products.
Such a document would typically include key features, functionalities, technical specifications, and applications of the product. It might cover aspects like memory capacity, data transfer rates, power requirements, interface types, and compatibility with other systems or components. Additionally, it could provide guidelines on installation, usage, maintenance, and troubleshooting.
Given the unique identifier, it is crucial to refer to the manufacturer's official documentation or website to obtain accurate and detailed information. This will ensure that users understand the capabilities and limitations of the product, as well as its potential applications in various technological solutions.
Such a document would typically include key features, functionalities, technical specifications, and applications of the product. It might cover aspects like memory capacity, data transfer rates, power requirements, interface types, and compatibility with other systems or components. Additionally, it could provide guidelines on installation, usage, maintenance, and troubleshooting.
Given the unique identifier, it is crucial to refer to the manufacturer's official documentation or website to obtain accurate and detailed information. This will ensure that users understand the capabilities and limitations of the product, as well as its potential applications in various technological solutions.
Equivalent
The M24512-DRDW3TP/K is a 512-Kbit I2C-compatible EEPROM from STMicroelectronics. Equivalent products from other manufacturers include:
1. Microchip: 24LC512 - 512K I2C EEPROM
2. ON Semiconductor: CAT24C512 - 512-Kb I2C CMOS Serial EEPROM
3. Atmel (Microchip Technology): AT24C512B - 512-Kbit Two-wire Serial EEPROM
4. Renesas Electronics: R1EX24512 - 512-Kbit I2C bus EEPROM
These alternatives generally offer similar capacities and I2C interface compatibility.
1. Microchip: 24LC512 - 512K I2C EEPROM
2. ON Semiconductor: CAT24C512 - 512-Kb I2C CMOS Serial EEPROM
3. Atmel (Microchip Technology): AT24C512B - 512-Kbit Two-wire Serial EEPROM
4. Renesas Electronics: R1EX24512 - 512-Kbit I2C bus EEPROM
These alternatives generally offer similar capacities and I2C interface compatibility.
Features
The M24512-DRDW3TP/K is a 512-Kbit EEPROM device organized as 64K x 8 bits. It features a Two-Wire I²C serial interface, which supports both standard (100 kHz) and fast (400 kHz) modes, as well as Fast-mode Plus (Fm+, 1 MHz) and Ultra-fast mode (UFm, 5 MHz). The device operates over a wide voltage range from 1.7V to 5.5V, making it suitable for various applications.
Key features include:
1. Data Retention and Endurance: Offers up to 1 million write cycles and data retention of more than 40 years.
2. Security Features: Includes a programmable write protection on the entire memory and a hardware write protection pin.
3. Identification Page: A dedicated 256-byte page allowing the storage of sensitive data.
4. High Reliability: Built for robustness with error correction code (ECC) for single-bit error detection and correction.
5. Temperature Range: Operates in a wide temperature range, typically from -40°C to +85°C.
The device is suitable for industrial and consumer electronics, providing reliable and secure data storage solutions.
Key features include:
1. Data Retention and Endurance: Offers up to 1 million write cycles and data retention of more than 40 years.
2. Security Features: Includes a programmable write protection on the entire memory and a hardware write protection pin.
3. Identification Page: A dedicated 256-byte page allowing the storage of sensitive data.
4. High Reliability: Built for robustness with error correction code (ECC) for single-bit error detection and correction.
5. Temperature Range: Operates in a wide temperature range, typically from -40°C to +85°C.
The device is suitable for industrial and consumer electronics, providing reliable and secure data storage solutions.
Pinout
The M24512-DRDW3TP/K is a 512-Kbit serial I2C bus EEPROM manufactured by STMicroelectronics. It is organized as 64K x 8 bits and operates with a supply voltage range of 1.7 V to 5.5 V. The device is available in several package options, including the TSSOP-8, which features an 8-pin configuration. Here are the pin functions for the TSSOP-8 package:
1. A0, A1, A2: These are address pins used to select the device address, allowing up to eight devices on the same bus.
2. VSS: Ground pin.
3. SDA (Serial Data): Bidirectional data line for serial communication.
4. SCL (Serial Clock): Clock input for I2C interface.
5. WP (Write Protect): When asserted, the write protect feature is enabled, preventing write operations.
6. VCC: Power supply pin.
The M24512-DRDW3TP/K is designed for applications requiring reliable non-volatile memory storage, offering features like byte and page write modes, self-timed write cycles, and programmable write protection.
1. A0, A1, A2: These are address pins used to select the device address, allowing up to eight devices on the same bus.
2. VSS: Ground pin.
3. SDA (Serial Data): Bidirectional data line for serial communication.
4. SCL (Serial Clock): Clock input for I2C interface.
5. WP (Write Protect): When asserted, the write protect feature is enabled, preventing write operations.
6. VCC: Power supply pin.
The M24512-DRDW3TP/K is designed for applications requiring reliable non-volatile memory storage, offering features like byte and page write modes, self-timed write cycles, and programmable write protection.
Manufacturer
The M24512-DRDW3TP/K is manufactured by STMicroelectronics. STMicroelectronics, commonly referred to as ST, is a global semiconductor company that designs, develops, manufactures, and markets a wide range of semiconductor products, including integrated circuits and discrete devices. The company serves various industries, including automotive, industrial, personal electronics, communication equipment, and computer peripherals. STMicroelectronics is known for its innovation in areas like microcontrollers, sensors, power management components, and more. As a leader in the semiconductor industry, ST focuses on providing solutions that enhance energy efficiency, connectivity, and safety across various applications. The company is headquartered in Geneva, Switzerland, and operates globally with a diverse customer base.
Application
The M24512-DRDW3TP/K is a 512-Kbit serial EEPROM typically used in various applications. These include consumer electronics, where it stores configuration settings and user preferences; automotive systems, for managing data like diagnostics and mileage; industrial equipment, for logging operational data and parameters; and medical devices, to maintain calibration data and patient information. It is also utilized in telecommunications for secure and reliable data storage. Its capacity and serial interface make it suitable for applications needing non-volatile memory to preserve essential data when power is off.
Package
The M24512-DRDW3TP/K is a 512-Kbit I²C-compatible Serial EEPROM from STMicroelectronics, housed in a TSSOP (Thin Shrink Small Outline Package). The TSSOP package is designed for surface mount technology, offering a compact form factor suitable for various electronic applications.
