M24C08-RMN6P

M24C08-RMN6P is an 8‑kilobit I2C serial EEPROM from STMicroelectronics (M24Cxx family). It provides non‑volatile storage of 1024 bytes that retain data after power is removed.
Key features
- Interface: I2C two‑wire bus. 7‑bit device address starts with 1010 plus A0–A2 hardware pins to allow multiple devices on one bus.
- Memory: 1024 × 8 bits; supports random reads and writes with a 16‑byte page write size.
- Performance: Write cycle tWR typically ~5 ms; endurance about 1,000,000 write cycles; data retention for many years.
- Power and range: Supply voltage typically 1.8–5.5 V (variant specific); operates over a wide temperature range (industrial versions common: −40 to +85°C; check datasheet for exact spec).
- Package: 8‑pin small package with SDA, SCL, VCC, GND, and A0–A2 pins.
Applications
Suitable for microcontroller configuration data, calibration tables, logs, and other small non‑volatile storage needs in embedded systems.
Note: Verify exact voltage range, timing, and pinout for your RMN6P variant in the official datasheet.

Equivalent devices (8‑Kbit I2C serial EEPROM, 1024×8, 8‑pin):
- NXP/Philips 24C08
- Microchip 24AA08 / 24LC08 / 24C08 family
- ON Semiconductor CAT24C08 (and CAT24C08A)
These are cross‑compatible with M24C08-RMN6P in function and generally pinout; other vendors offer matching 24C08/I2C EEPROMs as well.

M24C08-RMN6P is a serial I2C EERPOM (8 Kbit). Key features:
- 8 Kbit memory organized as 1024 x 8
- I2C two-wire interface; standard and fast modes up to 1 MHz
- Random and sequential read; 16-byte page write
- Write cycle time (tWC) ≤ 5 ms
- Address pins A0–A2 for device addressing; WP pin for write protection
- Endurance: ~1,000,000 write cycles; data retention ~40 years
- Supply voltage: 2.7–5.5 V; operating temperature typically -40 to 85°C (industrial)
- 8-pin package (RMN6P), RoHS-compliant; low power consumption in standby
- Optional features: simple hardware addressing, robust ESD protection on I2C lines
Note: exact I2C speed, current figures, and temperature range may vary by lot; check the specific datasheet for the RMN6P variant.

Pin count: 8 pins.
Function: M24C08-RMN6P is an 8‑Kbit I2C serial EEPROM. It uses a two‑wire interface (SDA, SCL), with A0–A2 address pins to set the I2C address, a WP (write‑protect) pin, and VCC/GND power pins.

- Manufacturer: STMicroelectronics (ST)
- What kind of company: A multinational electronics and semiconductor manufacturer (global IC and memory supplier), headquartered in Geneva, Switzerland.

- Non-volatile I2C memory for embedded systems (small data storage)
- Store device configuration, calibration data, serial and manufacturing information
- Firmware parameters, IDs, and versioning for MCUs
- Data logging, event logs, look-up tables and other parameter storage
- Used in consumer electronics, automotive/industrial equipment, medical devices, and smart meters

An 8-pin Small Outline (SO-8) package (lead-free).