이미지는 참조용입니다.

MAX4717EUB+T

IC SWITCH SPDT 10UMAX

제조업체아날로그 장비 주식회사/Maxim 통합
제조업체 부품 #MAX4717EUB+T
데이터시트 MAX4717EUB+T DataSheet
패키지 MSOP-10
재고9624

365 1일 품질 보증

7*24 영업 시간 서비스 보증

90-판매 후 1일 보증

정품 보증

사양

속성	가치
Supplier	Analog Devices Inc./Maxim Integrated
Package	Tape & Reel (TR),Cut Tape (CT)
ProductStatus	Active
SwitchCircuit	SPDT
Multiplexer/DemultiplexerCircuit	2:1
NumberofCircuits	2
On-StateResistance(Max)	4.5Ohm
Channel-to-ChannelMatching(ΔRon)	100mOhm
Voltage-SupplySingle(V+)	1.8V ~ 5.5V
SwitchTime(TonToff)(Max)	80ns, 40ns
-3dbBandwidth	300MHz
ChargeInjection	5pC
ChannelCapacitance(CS(off)CD(off))	9pF
Current-Leakage(IS(off))(Max)	500pA
Crosstalk	-110dB @ 1MHz
OperatingTemperature	-40°C ~ 85°C (TA)
MountingType	Surface Mount
Package/Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

개요

Description

MAX4717EUB+T is a Maxim Integrated (now part of Analog Devices) device in the EUB 8-pin package with tape-and-reel packaging (+T). The MAX4717 is used for current sensing in power-management circuits: it measures the voltage drop across a sense resistor and outputs a proportional voltage for an ADC or MCU. Typical features include a wide input/common‑mode range, low input offset, rail-to-rail output, and low quiescent current, with protective behavior for abnormal conditions (as described in the datasheet). Common applications are battery management, motor drivers, and switching regulators where precise current monitoring is needed without adding much load. To use, place a sense resistor in series with the load, connect the device’s sense pins across it, power the IC, and read the output voltage. The EUB suffix denotes the package type, and +T indicates Tape-and-Reel packaging. For exact electrical specs and pinout, refer to the official MAX4717 datasheet.

Pinout

- Pin count: 8 pins (8-pin package, e.g., SOIC/MSOP).
- Function: General-purpose, single-supply, rail-to-rail operational amplifier (precision op-amp).
- Note: EUB+T indicates the specific package and tape-and-reel option.

Manufacturer

Manufacturer: Maxim Integrated (now part of Analog Devices, Inc.).
What kind of company: A fabless semiconductor company that designs and markets analog and mixed-signal integrated circuits.

Application

MAX4717EUB+T is a high-side/low-side current-sense amplifier that measures voltage drop across a shunt and outputs a proportional signal. Typical applications include:
- Automotive power management and battery monitoring
- Switch‑mode power supplies, DC‑DC converters, and current‑limit protection
- Battery charging systems and battery‑management systems
- Motor control and drives
- Solar/renewable energy inverters and monitoring
- Uninterruptible power supplies and data‑center PMICs
- Industrial automation, sensors, and smart meters
- Portable/consumer electronics with battery optimization