MAX6037AAUK12+T

MAX6037AAUK12+T is a MAX6037 family microprocessor/voltage supervisor reset IC from Maxim (now Analog Devices). It monitors a supply rail and asserts a reset signal to a microcontroller or digital logic when the voltage is out of range, providing power-on reset and brown-out protection.
Key points:
- 12-pin UK package; +T indicates tape-and-reel packaging
- Single-supply voltage monitor with a fixed reset threshold
- Fast, push-pull reset output
- Low quiescent current; designed for reliable reset during power-up/power-down
- Used to ensure proper MCU startup, safe shutdown, and system stability in embedded designs
Typical connection: VCC to the monitored rail, GND to ground, RESET/_RST# output to the MCU reset input, with proper bypassing.
Note: exact threshold value, pinout, and features vary by variant. Check the latest MAX6037AAUK12+T datasheet for precise specifications before design.

Equivalent parts are other low-power voltage supervisors/reset ICs with similar thresholds and push-pull reset outputs. Examples include:
- TI TLV803/TLV803B
- TI TPS3800/TPS3809
- Microchip MCP1316/MCP1317
- On Semiconductor NCP301/NCP302
- Analog Devices ADM803
Note: choose by exact threshold (e.g., 2.5V, 3.3V), reset type, and package.

Here are the typical features you can expect for MAX6037AAUK12+T (precision voltage reference):
- Ultra-low-noise, high-accuracy voltage reference
- Low temperature drift (low ppm/°C)
- Very low quiescent current
- Good line and load regulation
- Stable with capacitive loads; fast startup
- Short-circuit/overload protection
- Wide operating temperature range (typical -40°C to +125°C)
- Available in compact packaging (UK12+T tape-and-reel variant)
Note: Please check the exact datasheet for the precise output voltage, tempco, current, and package details for this specific part.

- Pin count: 8 pins
- Function: Low-dropout voltage regulator (LDO) with enable; provides a regulated output from a higher input with low noise.

Manufacturer: Maxim Integrated (Maxim Integrated Products). It is a semiconductor company that designs and manufactures analog and mixed-signal integrated circuits (e.g., power management, interfaces, sensors). It is now part of Analog Devices.

Possible application areas for MAX6037AAUK12+T include:
- Precision voltage reference for ADC/DAC and instrumentation
- Microcontroller/system supervision (POR/BOR/reset timing, brown-out protection)
- Battery-powered/portable devices with low power needs
- Data acquisition, test and measurement equipment, instrumentation front-ends
- Automotive and industrial electronics requiring stable references
- Medical sensors and instrumentation where accuracy matters
Note: intended as a general reference; verify specific datasheet for exact capabilities and params.

MAX6037AAUK12+T comes in an 8‑pin small‑outline package (SO‑8/SOIC); the "+T" indicates tape‑and‑reel packaging.