사양
| 속성 | 가치 |
| Package | Tube |
| Series | MM8™ |
| ProductStatus | Active |
| SwitchType | General Purpose |
| NumberofOutputs | 1 |
| Ratio-Input:Output | 1:1 |
| OutputConfiguration | High Side |
| OutputType | N-Channel |
| Interface | On/Off |
| Voltage-Load | 2.7V ~ 5.5V |
| Voltage-Supply(Vcc/Vdd) | Not Required |
| Current-Output(Max) | 500mA |
| RdsOn(Typ) | 90mOhm |
| InputType | Non-Inverting |
| Features | Slew Rate Controlled, Status Flag |
| FaultProtection | Current Limiting (Fixed), Over Temperature, UVLO |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| SupplierDevicePackage | 8-SOIC |
개요
Description
MIC2025-2YM is a Microchip/Micrel dual high-side load-switch IC. It provides two independent, protected switches that connect a common input supply to two loads, with built-in fault protection. Key features typically include current-limit protection, thermal shutdown, undervoltage lockout, and reverse/short-circuit protection, plus soft-start to reduce inrush. Each channel has enable control (per-channel or common enable) and fault/status reporting to a host MCU. The -2YM suffix indicates a dual-channel version in a compact YM package suitable for space-constrained designs. Applications include powering LEDs, sensors, microcontrollers, and other loads in portable, automotive, and consumer electronics where simple sequencing and protection of power rails are needed. For exact electrical specs, pinout, current-limit setting (fixed or adjustable), and package dimensions, refer to the MIC2025-2YM datasheet.
Features
Here are the typical features of MIC2025-2YM (hot-swap / high-side switch controller):
- Integrated high-side switch with programmable current limit via external RSENSE
- Wide input range up to about 60 V
- Soft-start to limit inrush current
- UVLO (undervoltage lockout) for reliable turn-on
- Overcurrent/short-circuit protection with latch and auto-retry
- Overvoltage protection and thermal shutdown with hysteresis
- Enable/disable control input
- Fault/Status reporting (open-drain/status pin)
- Small 8-pin package (YM code, e.g., MSOP/SOIC family)
- Suitable for hot-swap, backplanes, telecom, and PCIe-like power rails
Note: Specific electricals (exact current-limit range, timing, and pin names) are defined in the datasheet for the exact variant.
- Integrated high-side switch with programmable current limit via external RSENSE
- Wide input range up to about 60 V
- Soft-start to limit inrush current
- UVLO (undervoltage lockout) for reliable turn-on
- Overcurrent/short-circuit protection with latch and auto-retry
- Overvoltage protection and thermal shutdown with hysteresis
- Enable/disable control input
- Fault/Status reporting (open-drain/status pin)
- Small 8-pin package (YM code, e.g., MSOP/SOIC family)
- Suitable for hot-swap, backplanes, telecom, and PCIe-like power rails
Note: Specific electricals (exact current-limit range, timing, and pin names) are defined in the datasheet for the exact variant.
Pinout
- Pin count: 8 pins (8-pin package; YM variant)
- Function: Dual high-side load switches with current limit and thermal shutdown
- Channels: Channel 1 and Channel 2, independently controlled
- Pins (typical mapping):
- EN1, IN1, OUT1 for channel 1
- GND
- EN2, IN2, OUT2 for channel 2
- VDD (supply for internal logic)
- Note: Exact pin order can vary by package variant; refer to the datasheet for the precise pinout.
- Function: Dual high-side load switches with current limit and thermal shutdown
- Channels: Channel 1 and Channel 2, independently controlled
- Pins (typical mapping):
- EN1, IN1, OUT1 for channel 1
- GND
- EN2, IN2, OUT2 for channel 2
- VDD (supply for internal logic)
- Note: Exact pin order can vary by package variant; refer to the datasheet for the precise pinout.
Manufacturer
Manufacturer: Microchip Technology Inc. (the MIC prefix originates from Micrel, now part of Microchip).
What kind of company: An American multinational semiconductor company that designs, develops, manufactures, and sells integrated circuits and embedded control solutions, including microcontrollers (PIC), analog, memory, and related ICs.
What kind of company: An American multinational semiconductor company that designs, develops, manufactures, and sells integrated circuits and embedded control solutions, including microcontrollers (PIC), analog, memory, and related ICs.
Application
MIC2025-2YM is a two-channel high-side switch with current limit and fault protection.
Common applications:
- Power-switching and load-gating in battery-powered portable devices (phones, tablets, wearables)
- Automotive body electronics and sensor modules needing controlled rails
- LED backlighting and indicator driving
- Power-management rails and sequencing for microcontrollers/SoCs
- Industrial/sensor equipment requiring overcurrent/short-circuit protection and safe shut-down
Common applications:
- Power-switching and load-gating in battery-powered portable devices (phones, tablets, wearables)
- Automotive body electronics and sensor modules needing controlled rails
- LED backlighting and indicator driving
- Power-management rails and sequencing for microcontrollers/SoCs
- Industrial/sensor equipment requiring overcurrent/short-circuit protection and safe shut-down
Package
Package type: MIC2025-2YM is in a 6-pin SOT-23 (SOT-23-6) package.
