이미지는 참조용입니다.
MIC2076-1YM-TR
+BOMIC PWR SWITCH N-CHAN 1:2 8SOIC
-
제조업체마이크로칩 기술
-
제조업체 부품 #MIC2076-1YM-TR
-
데이터시트 MIC2076-1YM-TR DataSheet
-
재고6637
365 1일 품질 보증
7*24 영업 시간 서비스 보증
90-판매 후 1일 보증
정품 보증
사양
| 속성 | 가치 |
| PartStatus | Active |
| SwitchType | General Purpose |
| NumberofOutputs | 2 |
| Ratio-Input:Output | 1:2 |
| OutputConfiguration | High Side |
| OutputType | N-Channel |
| Interface | On/Off |
| Voltage-Load | 2.7V ~ 5.5V |
| Voltage-Supply(Vcc/Vdd) | Not Required |
| Current-Output(Max) | 1.25A |
| RdsOn(Typ) | 90mOhm |
| InputType | Non-Inverting |
| Features | Slew Rate Controlled, Status Flag |
| FaultProtection | Current Limiting (Fixed), Over Temperature, UVLO |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| SupplierDevicePackage | 8-SOIC |
| Package/Case | 8-SOIC (0.154", 3.90mm Width) |
| BaseProductNumber | MIC2076 |
개요
Description
The MIC2076-1YM-TR is a highly integrated power management solution designed for use in various electronic applications. This device primarily functions as a power distribution switch, offering a low on-resistance to minimize power loss and improve efficiency. It features a wide input voltage range and is capable of handling up to 1.5 A of continuous current, making it suitable for both battery-powered and line-powered devices.
The MIC2076-1YM-TR incorporates built-in protection features, including overcurrent protection and thermal shutdown, ensuring device reliability and safety. It operates with a low quiescent current, enhancing battery life in portable applications. The device is available in a compact package, which helps save board space and simplifies design requirements.
Overall, the MIC2076-1YM-TR is ideal for applications such as smartphones, tablets, and other handheld devices, where efficient power management is critical. Its robust features and reliability make it a popular choice among engineers and designers.
The MIC2076-1YM-TR incorporates built-in protection features, including overcurrent protection and thermal shutdown, ensuring device reliability and safety. It operates with a low quiescent current, enhancing battery life in portable applications. The device is available in a compact package, which helps save board space and simplifies design requirements.
Overall, the MIC2076-1YM-TR is ideal for applications such as smartphones, tablets, and other handheld devices, where efficient power management is critical. Its robust features and reliability make it a popular choice among engineers and designers.
Equivalent
The MIC2076-1YM-TR is a power management IC often used for hot-swap applications. Equivalent products include the LTC4260 from Analog Devices, the MAX5940 from Maxim Integrated, and the TPS2490 from Texas Instruments. These alternatives offer similar features such as voltage monitoring, current limiting, and hot-swap capabilities. Always check the specific requirements of your application for compatibility.
Features
The MIC2076-1YM-TR is a high-performance power switch designed specifically for low-voltage applications. Key features include:
1. High Side Switch: It functions as a high-side power switch, making it suitable for connecting loads to the positive supply voltage.
2. Low On-Resistance: The device boasts a low on-resistance (RDS(on)), typically around 50 mΩ, which minimizes power loss and heat generation.
3. Wide Input Voltage Range: It operates within a voltage range of 2.5V to 5.5V, allowing for a variety of applications.
4. Current Limit Protection: Integrated current limiting prevents excessive current flow, protecting both the device and the load.
5. Thermal Shutdown: The IC includes thermal shutdown functionality that activates to prevent overheating.
6. Compact Package: Available in a small SOT-23 package, facilitating easy integration into space-constrained designs.
7. Low Standby Current: It features low standby current consumption, enhancing overall efficiency.
These characteristics make the MIC2076-1YM-TR ideal for battery-powered devices, portable electronics, and other low-voltage applications.
1. High Side Switch: It functions as a high-side power switch, making it suitable for connecting loads to the positive supply voltage.
2. Low On-Resistance: The device boasts a low on-resistance (RDS(on)), typically around 50 mΩ, which minimizes power loss and heat generation.
3. Wide Input Voltage Range: It operates within a voltage range of 2.5V to 5.5V, allowing for a variety of applications.
4. Current Limit Protection: Integrated current limiting prevents excessive current flow, protecting both the device and the load.
5. Thermal Shutdown: The IC includes thermal shutdown functionality that activates to prevent overheating.
6. Compact Package: Available in a small SOT-23 package, facilitating easy integration into space-constrained designs.
7. Low Standby Current: It features low standby current consumption, enhancing overall efficiency.
These characteristics make the MIC2076-1YM-TR ideal for battery-powered devices, portable electronics, and other low-voltage applications.
Pinout
The MIC2076-1YM-TR is a power management IC with a total of 8 pins. It functions primarily as a high-side power switch, providing features such as overcurrent protection, thermal shutdown, and soft start. The pin configuration includes:
1. OUT: Output pin for the load.
2. GND: Ground reference.
3. IN: Input voltage pin.
4. EN: Enable pin to control the operation.
5. CS: Current sense pin for overcurrent detection.
6. COMP: Compensation pin for stability.
7. NC: No connection; not internally connected.
8. VREF: Reference voltage output.
This device is commonly used in battery-powered applications, allowing for efficient power management and control.
1. OUT: Output pin for the load.
2. GND: Ground reference.
3. IN: Input voltage pin.
4. EN: Enable pin to control the operation.
5. CS: Current sense pin for overcurrent detection.
6. COMP: Compensation pin for stability.
7. NC: No connection; not internally connected.
8. VREF: Reference voltage output.
This device is commonly used in battery-powered applications, allowing for efficient power management and control.
Manufacturer
The MIC2076-1YM-TR is manufactured by Microchip Technology Inc. Microchip is a publicly traded company that specializes in developing microcontroller and microprocessor technologies, as well as associated software and hardware products. Founded in 1989, Microchip is known for its comprehensive portfolio of embedded control solutions, including analog, interface, mixed-signal, and memory products.
The MIC2076-1YM-TR specifically is a power distribution switch designed to manage power distribution in electronic devices. Microchip serves a broad range of industries, including automotive, industrial, consumer electronics, and communications, providing innovative solutions for designing and implementing electronic systems. The company emphasizes reliability, quality, and support, making them a key player in the semiconductor industry.
The MIC2076-1YM-TR specifically is a power distribution switch designed to manage power distribution in electronic devices. Microchip serves a broad range of industries, including automotive, industrial, consumer electronics, and communications, providing innovative solutions for designing and implementing electronic systems. The company emphasizes reliability, quality, and support, making them a key player in the semiconductor industry.
Application
The MIC2076-1YM-TR is a power management IC primarily used in applications requiring power distribution and voltage sequencing. Its key areas include:
1. Consumer Electronics: Power supply circuits in devices like smartphones, tablets, and laptops.
2. Computing Systems: Voltage regulation in PCs and servers.
3. Networking Equipment: Ensuring stable power in switches and routers.
4. Automotive: Power management in infotainment systems and sensors.
5. Industrial Automation: Power control in machinery and robotic systems.
Its features like low on-resistance and thermal shutdown make it suitable for efficient power management across these sectors.
1. Consumer Electronics: Power supply circuits in devices like smartphones, tablets, and laptops.
2. Computing Systems: Voltage regulation in PCs and servers.
3. Networking Equipment: Ensuring stable power in switches and routers.
4. Automotive: Power management in infotainment systems and sensors.
5. Industrial Automation: Power control in machinery and robotic systems.
Its features like low on-resistance and thermal shutdown make it suitable for efficient power management across these sectors.
Package
The MIC2076-1YM-TR is packaged in a 5-pin SOT-23 (Thin SOT, or Small Outline Transistor) package type, which is commonly used for compact surface-mount applications.
