사양
| 속성 | 가치 |
| Package | Tube |
| ProductStatus | Active |
| OutputConfiguration | Positive |
| OutputType | Fixed |
| NumberofRegulators | 1 |
| Voltage-Input(Max) | 6V |
| Voltage-Output(Min/Fixed) | 2.5V |
| VoltageDropout(Max) | 0.5V @ 1A |
| Current-Output | 1A |
| ProtectionFeatures | Over Current, Over Temperature |
| OperatingTemperature | -40°C ~ 125°C |
| MountingType | Surface Mount |
| Package/Case | TO-261-4, TO-261AA |
개요
Description
MIC37100-2.5WS is a fixed-threshold voltage supervisor (reset generator) from Micrel/Microchip. It continuously monitors the supply voltage and asserts a reset when Vcc falls below the 2.5 V threshold. When the supply stabilizes above the threshold, the device releases the reset after its built-in power‑on reset delay, ensuring a clean start for microcontrollers or processors.
Key points:
- Fixed 2.5 V threshold (provides brown‑out/power‑on reset protection).
- Generates a reset signal to ensure proper microcontroller startup.
- Typically features low quiescent current and a compact WS package for space-constrained boards.
- Suitable for supervising 2.5 V cores or rails derived from higher voltages, and for safe‑boot/power‑on sequencing.
Typical applications include microcontroller supervision, brown‑out protection, and reliable reset timing in embedded systems. For exact electrical specs, timing, polarity of the reset output, and package details, refer to the datasheet.
Key points:
- Fixed 2.5 V threshold (provides brown‑out/power‑on reset protection).
- Generates a reset signal to ensure proper microcontroller startup.
- Typically features low quiescent current and a compact WS package for space-constrained boards.
- Suitable for supervising 2.5 V cores or rails derived from higher voltages, and for safe‑boot/power‑on sequencing.
Typical applications include microcontroller supervision, brown‑out protection, and reliable reset timing in embedded systems. For exact electrical specs, timing, polarity of the reset output, and package details, refer to the datasheet.
Equivalent
Equivalent 2.5V reset supervisors to MIC37100-2.5WS include: TI TLV803-2.5 (and TLV803B-2.5), TI TPS3890-2.5, Microchip MCP1316-2.5, Onsemi NCP301-2.5. Choose by package and features (push-pull output, debounce, enable). For precise cross-reference, use Digi-Key/Mouser cross-ref.
Features
MIC37100-2.5WS features:
- Fixed 2.5V output low-dropout regulator
- Low quiescent current
- Low dropout voltage
- Enable/shutdown control
- Overcurrent protection with current limit
- Thermal shutdown protection
- Good line and load regulation; low output noise
- Short-circuit tolerant
- Small WS package; RoHS-compliant; suitable for compact/portable designs
- Fixed 2.5V output low-dropout regulator
- Low quiescent current
- Low dropout voltage
- Enable/shutdown control
- Overcurrent protection with current limit
- Thermal shutdown protection
- Good line and load regulation; low output noise
- Short-circuit tolerant
- Small WS package; RoHS-compliant; suitable for compact/portable designs
Pinout
Pin count: 3 pins.
Function: Fixed 2.5 V low-dropout voltage regulator (Vin, GND, Vout).
Package: WS (SOT-23 style).
Function: Fixed 2.5 V low-dropout voltage regulator (Vin, GND, Vout).
Package: WS (SOT-23 style).
Manufacturer
Manufacturer: Microchip Technology (the MIC37100-2.5WS originated from Micrel, Inc.; Microchip acquired Micrel).
What kind of company: An American multinational semiconductor company that designs, manufactures, and sells microcontrollers, analog/linear ICs, memory, and related embedded control products.
What kind of company: An American multinational semiconductor company that designs, manufactures, and sells microcontrollers, analog/linear ICs, memory, and related embedded control products.
Application
MIC37100-2.5WS is a 2.5 V voltage supervisor used to generate a clean reset for low‑voltage digital systems. Typical applications:
- Microcontrollers, DSPs, FPGAs, and memories with 2.5 V logic
- Power-on reset and brown-out protection for single or multi-rail supplies
- DC-DC regulator enable/monitoring to ensure valid rails before use
- Battery-powered portable devices (wearables, sensors, medical devices)
- Telecommunication and industrial control systems requiring robust reset during power cycling
In short: any 2.5 V logic system needing reliable reset supervision.
- Microcontrollers, DSPs, FPGAs, and memories with 2.5 V logic
- Power-on reset and brown-out protection for single or multi-rail supplies
- DC-DC regulator enable/monitoring to ensure valid rails before use
- Battery-powered portable devices (wearables, sensors, medical devices)
- Telecommunication and industrial control systems requiring robust reset during power cycling
In short: any 2.5 V logic system needing reliable reset supervision.
Package
The MIC37100-2.5WS is in a 5-pin SC-70 (SOT-23-5) small-outline package.
