이미지는 참조용입니다.
MP1482DN-LF-Z
+BOM-
제조업체유한회사
-
제조업체 부품 #MP1482DN-LF-Z
-
재고27025
365 1일 품질 보증
7*24 영업 시간 서비스 보증
90-판매 후 1일 보증
정품 보증
사양
| 속성 | 가치 |
| Manufacturer | Monolithic Power Systems |
| Package | SOIC8E |
개요
Description
The MP1482DN-LF-Z is a synchronous buck converter from Monolithic Power Systems (MPS). It features a 4.5V–28V input range, delivers up to 2A output current, and operates at a 340kHz fixed switching frequency.
Key characteristics:
- High efficiency (up to 95%) with integrated power MOSFETs.
- Adjustable output voltage (0.8V–24V).
- Low standby current (50μA) in shutdown mode.
- Protections: Over-current (OCP), thermal shutdown (TSD), and under-voltage lockout (UVLO).
Applications include industrial, automotive, and consumer electronics where compact, efficient power conversion is needed. The DFN-8 (3x3mm) package makes it suitable for space-constrained designs.
For detailed specs, refer to the datasheet.
Key characteristics:
- High efficiency (up to 95%) with integrated power MOSFETs.
- Adjustable output voltage (0.8V–24V).
- Low standby current (50μA) in shutdown mode.
- Protections: Over-current (OCP), thermal shutdown (TSD), and under-voltage lockout (UVLO).
Applications include industrial, automotive, and consumer electronics where compact, efficient power conversion is needed. The DFN-8 (3x3mm) package makes it suitable for space-constrained designs.
For detailed specs, refer to the datasheet.
Equivalent
The MP1482DN-LF-Z is a synchronous buck converter. Equivalent alternatives include:
- LM2675 (Texas Instruments)
- AP63356 (Diodes Incorporated)
- SY8303 (Silergy)
- RT8259 (Richtek)
These offer similar specs (e.g., input voltage, output current, efficiency). Always verify pin compatibility and electrical characteristics for your design. For exact replacements, check distributor cross-reference tools.
- LM2675 (Texas Instruments)
- AP63356 (Diodes Incorporated)
- SY8303 (Silergy)
- RT8259 (Richtek)
These offer similar specs (e.g., input voltage, output current, efficiency). Always verify pin compatibility and electrical characteristics for your design. For exact replacements, check distributor cross-reference tools.
Features
The MP1482DN-LF-Z is a synchronous buck converter with the following key features:
- Input Voltage Range: 4.5V to 28V
- Output Current: Up to 2A
- Switching Frequency: 500kHz (adjustable)
- High Efficiency (up to 95%) with integrated low-RDS(ON) MOSFETs
- Adjustable Output Voltage (0.8V to 25V)
- Protections: Over-current (OCP), over-voltage (OVP), under-voltage lockout (UVLO), and thermal shutdown
- Compact Package: SOIC-8
- Light Load Efficiency Mode (PFM) for improved efficiency at low loads
Ideal for industrial, automotive, and consumer applications requiring compact, efficient power conversion.
- Input Voltage Range: 4.5V to 28V
- Output Current: Up to 2A
- Switching Frequency: 500kHz (adjustable)
- High Efficiency (up to 95%) with integrated low-RDS(ON) MOSFETs
- Adjustable Output Voltage (0.8V to 25V)
- Protections: Over-current (OCP), over-voltage (OVP), under-voltage lockout (UVLO), and thermal shutdown
- Compact Package: SOIC-8
- Light Load Efficiency Mode (PFM) for improved efficiency at low loads
Ideal for industrial, automotive, and consumer applications requiring compact, efficient power conversion.
Pinout
The MP1482DN-LF-Z is a 6-pin synchronous buck converter IC with the following pin functions:
1. BS (Bootstrap) – Connects to a bootstrap capacitor for high-side MOSFET drive.
2. IN (Input Voltage) – Power supply input (4.5V to 28V).
3. SW (Switch Node) – Output to the inductor and connected to the internal MOSFETs.
4. GND (Ground) – Reference ground.
5. FB (Feedback) – Receives feedback voltage for output regulation (adjustable via resistors).
6. EN (Enable) – Controls ON/OFF state (high to enable, low to disable).
This IC provides efficient step-down voltage conversion with integrated MOSFETs, suitable for compact power supply designs.
1. BS (Bootstrap) – Connects to a bootstrap capacitor for high-side MOSFET drive.
2. IN (Input Voltage) – Power supply input (4.5V to 28V).
3. SW (Switch Node) – Output to the inductor and connected to the internal MOSFETs.
4. GND (Ground) – Reference ground.
5. FB (Feedback) – Receives feedback voltage for output regulation (adjustable via resistors).
6. EN (Enable) – Controls ON/OFF state (high to enable, low to disable).
This IC provides efficient step-down voltage conversion with integrated MOSFETs, suitable for compact power supply designs.
Manufacturer
The MP1482DN-LF-Z is manufactured by Monolithic Power Systems (MPS), a leading semiconductor company specializing in high-performance power solutions. MPS designs and produces integrated circuits for power management, focusing on efficiency, compactness, and reliability. Their products are widely used in consumer electronics, automotive, industrial, and computing applications. The MP1482DN-LF-Z is a synchronous buck converter, typical of MPS's expertise in DC-DC conversion. The company is known for innovation and high-quality power ICs.
Package
The MP1482DN-LF-Z is a step-down (buck) DC-DC converter in a SOIC-8 package. It features a compact, surface-mount design for efficient power conversion in space-constrained applications. The package is lead-free (LF) and RoHS-compliant, suitable for industrial and consumer electronics.
