사양
| 속성 | 가치 |
| Package / Case | Tube |
| Part Status | Discontinued at Digi-Key |
| Type | Xenon Photo Flash Charger |
| Applications | Digital Still Cameras, Optical Film Cameras, PDAs |
| Mounting Type | Surface Mount |
개요
Description
The MP3361DK-LF is a high-performance, step-up (boost) LED driver designed for powering multiple LEDs in series. It is part of Monolithic Power Systems' lineup and is specifically engineered for applications requiring efficient and compact solutions, such as LCD backlighting or general LED illumination. The device integrates a 3A, 40V power switch to achieve high output voltage with a wide input voltage range, generally from 4.5V to 25V.
Key features include a programmable switching frequency, allowing designers to optimize the trade-off between efficiency and component size. Additionally, it offers a wide dimming range with PWM and analog dimming capabilities, ensuring flexibility in brightness control. The MP3361DK-LF incorporates over-voltage protection, cycle-by-cycle current limiting, and thermal shutdown for enhanced reliability.
The device is typically housed in a compact, thermally enhanced package, making it suitable for space-constrained applications. Overall, the MP3361DK-LF provides a robust and efficient solution for driving high-brightness LEDs in a variety of commercial and industrial applications.
Key features include a programmable switching frequency, allowing designers to optimize the trade-off between efficiency and component size. Additionally, it offers a wide dimming range with PWM and analog dimming capabilities, ensuring flexibility in brightness control. The MP3361DK-LF incorporates over-voltage protection, cycle-by-cycle current limiting, and thermal shutdown for enhanced reliability.
The device is typically housed in a compact, thermally enhanced package, making it suitable for space-constrained applications. Overall, the MP3361DK-LF provides a robust and efficient solution for driving high-brightness LEDs in a variety of commercial and industrial applications.
Equivalent
The MP3361DK-LF is a boost LED driver by Monolithic Power Systems. Equivalent products include:
1. Texas Instruments TPS61165: A high-brightness LED driver with integrated switch.
2. On Semiconductor NCL30160: A constant current boost LED driver.
3. Linear Technology (Analog Devices) LT3519: A 2.3MHz boost converter designed for driving LEDs.
4. Diodes Incorporated AL8860: A boost/buck LED driver with internal MOSFET.
These alternatives may vary slightly in features, so it's essential to check specific requirements.
1. Texas Instruments TPS61165: A high-brightness LED driver with integrated switch.
2. On Semiconductor NCL30160: A constant current boost LED driver.
3. Linear Technology (Analog Devices) LT3519: A 2.3MHz boost converter designed for driving LEDs.
4. Diodes Incorporated AL8860: A boost/buck LED driver with internal MOSFET.
These alternatives may vary slightly in features, so it's essential to check specific requirements.
Features
The MP3361DK-LF is a high-efficiency, step-up converter designed for driving multiple strings of WLEDs. It offers a wide input voltage range from 4.5V to 36V, making it suitable for various applications, including LCD backlighting. Key features include:
1. Integrated Switch: Features a 1.2A switch to support high-output currents.
2. Wide Input Range: Operates from 4.5V to 36V.
3. High Efficiency: Designed to optimize power efficiency across a wide range of operating conditions.
4. Adjustable Frequency: Allows for frequency adjustments between 100kHz and 1MHz.
5. Dimming Control: Supports both analog and PWM dimming for flexible brightness control.
6. Over-Voltage Protection: Comes with built-in over-voltage protection to prevent damage.
7. Thermal Shutdown: Includes a thermal shutdown feature to enhance safety.
8. Compact Package: Available in a small, thermally-enhanced SOIC8 package.
These features make the MP3361DK-LF a versatile solution for applications requiring efficient and reliable LED driving capabilities.
1. Integrated Switch: Features a 1.2A switch to support high-output currents.
2. Wide Input Range: Operates from 4.5V to 36V.
3. High Efficiency: Designed to optimize power efficiency across a wide range of operating conditions.
4. Adjustable Frequency: Allows for frequency adjustments between 100kHz and 1MHz.
5. Dimming Control: Supports both analog and PWM dimming for flexible brightness control.
6. Over-Voltage Protection: Comes with built-in over-voltage protection to prevent damage.
7. Thermal Shutdown: Includes a thermal shutdown feature to enhance safety.
8. Compact Package: Available in a small, thermally-enhanced SOIC8 package.
These features make the MP3361DK-LF a versatile solution for applications requiring efficient and reliable LED driving capabilities.
Pinout
The MP3361DK-LF is an LED driver IC typically used in applications such as LCD backlighting. It is produced by Monolithic Power Systems (MPS). The chip is designed to drive multiple strings of LEDs with high efficiency and reliability.
The MP3361DK-LF comes in a 16-pin SOIC package. Below are the pin functions:
1. VIN – Input voltage.
2. SW – Switch output (drain of internal MOSFET).
3. CS – Current sense input.
4. COMP – Compensation for the control loop.
5. EN – Enable control.
6. RT – Timing resistor to set switching frequency.
7. FAULT – Fault indicator.
8. GND – Ground.
9. VCC – Internal LDO output.
10. FB1 – Feedback for LED string 1.
11. FB2 – Feedback for LED string 2.
12. FB3 – Feedback for LED string 3.
13. FB4 – Feedback for LED string 4.
14. FB5 – Feedback for LED string 5.
15. FB6 – Feedback for LED string 6.
16. SYNC – Synchronization input.
The MP3361DK-LF is designed to efficiently drive LED strings, ensuring consistent brightness and color uniformity across LEDs.
The MP3361DK-LF comes in a 16-pin SOIC package. Below are the pin functions:
1. VIN – Input voltage.
2. SW – Switch output (drain of internal MOSFET).
3. CS – Current sense input.
4. COMP – Compensation for the control loop.
5. EN – Enable control.
6. RT – Timing resistor to set switching frequency.
7. FAULT – Fault indicator.
8. GND – Ground.
9. VCC – Internal LDO output.
10. FB1 – Feedback for LED string 1.
11. FB2 – Feedback for LED string 2.
12. FB3 – Feedback for LED string 3.
13. FB4 – Feedback for LED string 4.
14. FB5 – Feedback for LED string 5.
15. FB6 – Feedback for LED string 6.
16. SYNC – Synchronization input.
The MP3361DK-LF is designed to efficiently drive LED strings, ensuring consistent brightness and color uniformity across LEDs.
Manufacturer
The MP3361DK-LF is manufactured by Monolithic Power Systems, Inc. (MPS). MPS is a company that specializes in designing and providing high-performance power solutions. Founded in 1997, the company is known for its expertise in power management technology, delivering analog and mixed-signal semiconductors. MPS focuses on solutions that cater to a variety of industries, including computing and storage, automotive, industrial, communications, and consumer electronics. The company’s products are used to enhance power efficiency and performance in electronic devices and systems.
Application
The MP3361DK-LF is a high-efficiency step-up LED driver used primarily in display and lighting applications. It is commonly employed in LCD backlighting, LED billboards, and general LED lighting. The device is designed to drive multiple strings of LEDs with high current accuracy, making it suitable for applications requiring consistent brightness and color uniformity. Its integrated power MOSFET and high switching frequency allow for compact and efficient designs, ideal for portable devices, automotive displays, and architectural lighting. Additionally, its protection features, like over-voltage and short-circuit protection, enhance reliability in various operating environments.
Package
The MP3361DK-LF is typically available in a SOIC-8EP package. This package type is a small outline integrated circuit with an exposed pad for enhanced thermal performance.
