사양
| 속성 | 가치 |
| Package / Case | Tray |
| Series | MPC83xx |
| Part Status | Last Time Buy |
| Core Processor | PowerPC e300c3 |
| Number of Cores / Bus Width | 1 Core, 32-Bit |
| Speed | 400MHz |
| Co - Processors / DSP | Communications; QUICC Engine |
| RAM Controllers | DDR2 |
| Graphics Acceleration | No |
| Ethernet | 10/100Mbps (3) |
| USB | USB 2.0 (1) |
| Voltage - I / O | 1.8V, 3.3V |
| Operating Temperature | -40°C ~ 105°C (TA) |
개요
Description
The MPC8309CVMAGDCA is a microprocessor from NXP Semiconductors, designed for embedded applications requiring a balance of performance, power efficiency, and cost-effectiveness. Part of the PowerQUICC II Pro family, it is based on the e300 core, which implements the Power Architecture technology.
Clocking up to 400 MHz, the MPC8309 is well-suited for networking, industrial control, and consumer electronics. It includes a range of integrated peripherals, such as Ethernet controllers, USB, PCI, UARTs, and I2C interfaces, enhancing connectivity and versatility. The processor also supports DDR2 memory, optimizing data throughput and system performance.
The MPC8309 focuses on low power consumption, making it suitable for energy-sensitive applications. It is typically used in cost-sensitive markets where space and power constraints are critical. The chip's compact configuration allows designers to create efficient, high-performance systems for a variety of embedded applications, maintaining a balance between cost and capability.
Clocking up to 400 MHz, the MPC8309 is well-suited for networking, industrial control, and consumer electronics. It includes a range of integrated peripherals, such as Ethernet controllers, USB, PCI, UARTs, and I2C interfaces, enhancing connectivity and versatility. The processor also supports DDR2 memory, optimizing data throughput and system performance.
The MPC8309 focuses on low power consumption, making it suitable for energy-sensitive applications. It is typically used in cost-sensitive markets where space and power constraints are critical. The chip's compact configuration allows designers to create efficient, high-performance systems for a variety of embedded applications, maintaining a balance between cost and capability.
Equivalent
The MPC8309CVMAGDCA is a PowerQUICC II Pro processor from NXP. Equivalent products might include processors with similar performance and power efficiency from other manufacturers, such as Texas Instruments' AM335x series or Microchip's SAMA5 series. It's important to compare specific features like clock speed, interfaces, and power consumption to find the most suitable equivalent.
Features
The MPC8309CVMAGDCA is a PowerQUICC II Pro processor from NXP Semiconductors. It is designed for industrial and networking applications, providing a combination of performance, efficiency, and connectivity. Key features include:
1. Core: It is powered by an e300 core, which is a Power Architecture core running at up to 333 MHz.
2. Memory: Supports DDR2 SDRAM, providing flexibility in memory configurations.
3. Integrated Connectivity:
- Dual 10/100/1000 Ethernet controllers, allowing for robust network communication.
- USB 2.0 with integrated PHY for peripheral connectivity.
- PCI interface for additional expansion options.
4. I/O Capabilities: Includes serial interfaces like UART and I2C, which are essential for industrial applications.
5. Security Features: Basic security features to ensure data integrity and protection.
6. Low Power Consumption: Designed for applications where energy efficiency is crucial.
These features make the MPC8309CVMAGDCA suitable for applications such as industrial control, smart grid devices, and networked equipment.
1. Core: It is powered by an e300 core, which is a Power Architecture core running at up to 333 MHz.
2. Memory: Supports DDR2 SDRAM, providing flexibility in memory configurations.
3. Integrated Connectivity:
- Dual 10/100/1000 Ethernet controllers, allowing for robust network communication.
- USB 2.0 with integrated PHY for peripheral connectivity.
- PCI interface for additional expansion options.
4. I/O Capabilities: Includes serial interfaces like UART and I2C, which are essential for industrial applications.
5. Security Features: Basic security features to ensure data integrity and protection.
6. Low Power Consumption: Designed for applications where energy efficiency is crucial.
These features make the MPC8309CVMAGDCA suitable for applications such as industrial control, smart grid devices, and networked equipment.
Pinout
The MPC8309CVMAGDCA is a microprocessor from NXP Semiconductor's PowerQUICC II Pro family. It is designed for embedded applications and is based on the Power Architecture. This microprocessor typically comes in a 516-pin Ball Grid Array (BGA) package.
Key functions of the MPC8309 include:
1. Processing Core: It features an e300c3 core, capable of running at clock speeds up to 400 MHz.
2. Connectivity: It supports multiple connectivity options, including Ethernet, PCI, USB, and UART interfaces, making it suitable for networking and communication applications.
3. Memory Support: It includes a memory controller that supports DDR2 and SDRAM, allowing for flexible memory configurations.
4. I/O Interfaces: The device integrates various I/O interfaces such as SPI, I2C, and GPIO, enabling interfacing with a wide range of peripherals.
5. Security: It includes security features like encryption and decryption engines, which are crucial for secure data transactions.
These features make the MPC8309 suitable for applications in industrial automation, networking, and other embedded systems requiring robust processing and connectivity capabilities.
Key functions of the MPC8309 include:
1. Processing Core: It features an e300c3 core, capable of running at clock speeds up to 400 MHz.
2. Connectivity: It supports multiple connectivity options, including Ethernet, PCI, USB, and UART interfaces, making it suitable for networking and communication applications.
3. Memory Support: It includes a memory controller that supports DDR2 and SDRAM, allowing for flexible memory configurations.
4. I/O Interfaces: The device integrates various I/O interfaces such as SPI, I2C, and GPIO, enabling interfacing with a wide range of peripherals.
5. Security: It includes security features like encryption and decryption engines, which are crucial for secure data transactions.
These features make the MPC8309 suitable for applications in industrial automation, networking, and other embedded systems requiring robust processing and connectivity capabilities.
Manufacturer
The MPC8309CVMAGDCA is manufactured by NXP Semiconductors. NXP is a global semiconductor company that specializes in designing and manufacturing a wide range of semiconductor products, including microcontrollers, processors, and integrated circuits. The company is known for its focus on providing solutions for various applications such as automotive, communication infrastructure, consumer electronics, and industrial markets. NXP Semiconductors is recognized for its innovation in fields like secure connectivity, embedded processing, and radio-frequency technology.
Application
The MPC8309CVMAGDCA is a PowerQUICC II Pro processor from NXP Semiconductors, designed for embedded applications. Its application areas include industrial automation, networking, and communications. It is ideal for use in routers, switches, and access points due to its networking capabilities. Additionally, the processor's features make it suitable for industrial control systems, where reliable and efficient processing is required. It can also be used in consumer electronics for handling multimedia processing and data management tasks. Its flexibility and performance make it a versatile choice for a wide range of embedded systems requiring robust processing capabilities.
Package
The MPC8309CVMAGDCA is a microprocessor from NXP/Freescale, and it comes in a PBGA (Plastic Ball Grid Array) package type.
