사양
| 속성 | 가치 |
| Package / Case | Tape & Reel (TR),Cut Tape (CT),Bulk |
| Series | 7SV |
| Part Status | Active |
| Logic Type | Buffer, Non-Inverting |
| Number of Elements | 1 |
| Number of Bits per Element | 1 |
| Output Type | 3-State |
| Current - Output High Low | 24mA, 24mA |
| Voltage - Supply | 0.9V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
개요
Description
The NC7SV126P5X is a single buffer IC from ON Semiconductor, part of their TinyLogic UHS (Ultra-High-Speed) family. It is designed to provide high-speed buffering capabilities while occupying minimal board space, making it ideal for compact and power-efficient applications. The device operates with a supply voltage range of 0.9V to 3.6V, allowing it to interface with a variety of digital circuits.
Key features include low power consumption and a high-speed performance, with a typical propagation delay of 2.5 ns at 3.3V. The NC7SV126P5X comes in a compact SC-70 package, offering ease of integration into densely populated circuit boards. It provides a high degree of noise immunity and is designed for applications in consumer electronics, computers, and communication equipment where space and power efficiency are critical.
Overall, the NC7SV126P5X is valued for its blend of speed, low power, and compact size, aligning with modern requirements for portable and efficient electronic applications.
Key features include low power consumption and a high-speed performance, with a typical propagation delay of 2.5 ns at 3.3V. The NC7SV126P5X comes in a compact SC-70 package, offering ease of integration into densely populated circuit boards. It provides a high degree of noise immunity and is designed for applications in consumer electronics, computers, and communication equipment where space and power efficiency are critical.
Overall, the NC7SV126P5X is valued for its blend of speed, low power, and compact size, aligning with modern requirements for portable and efficient electronic applications.
Equivalent
The NC7SV126P5X is a single buffer with 3-state output from ON Semiconductor. Equivalent or similar products may include the SN74LVC1G126 from Texas Instruments, 74LVC1G126 from Nexperia, and MC74VHC1G126 from ON Semiconductor. These are single buffer/line driver chips with similar functionalities, voltage ranges, and packaging options. Always verify electrical characteristics and pin configurations to ensure compatibility for your specific application.
Features
The NC7SV126P5X is a single buffer IC from ON Semiconductor. It is part of the TinyLogic® series, designed for low voltage and low power applications. This device features a wide range of operating voltages from 1.65V to 5.5V, making it versatile for different digital circuits. It provides a non-inverting output with a high-speed performance capability. The NC7SV126P5X is characterized by a low static power consumption, contributing to energy efficiency. It has a 3-state output, enabling the connection of multiple outputs to a common bus line. The device is housed in a space-saving SC-70 package, making it ideal for compact circuit designs. It is also 5V tolerant, which means it can interface with 5V TTL logic levels while operating at lower supply voltages. With its fast propagation delay and low noise generation, the NC7SV126P5X is suitable for use in various applications, including data communication, signal buffering, and level translation.
Pinout
The NC7SV126P5X is a single buffer/line driver with a tri-state output. It is part of the TinyLogic® UHS (Ultra High Speed) family. This device typically comes in a 5-pin package. The pin functions are as follows:
1. Pin 1 (OE): Output Enable. When high, the output is enabled; when low, the output is in a high-impedance state.
2. Pin 2 (IN): Input. The data input for the buffer.
3. Pin 3 (GND): Ground. The power supply ground.
4. Pin 4 (OUT): Output. The buffered output of the device.
5. Pin 5 (VCC): Positive Power Supply.
The NC7SV126P5X is used in applications where buffering with high-speed performance and minimal power consumption is required. It is especially useful in signal routing and logic level shifting.
1. Pin 1 (OE): Output Enable. When high, the output is enabled; when low, the output is in a high-impedance state.
2. Pin 2 (IN): Input. The data input for the buffer.
3. Pin 3 (GND): Ground. The power supply ground.
4. Pin 4 (OUT): Output. The buffered output of the device.
5. Pin 5 (VCC): Positive Power Supply.
The NC7SV126P5X is used in applications where buffering with high-speed performance and minimal power consumption is required. It is especially useful in signal routing and logic level shifting.
Manufacturer
The NC7SV126P5X is manufactured by ON Semiconductor, a company that specializes in the design and production of semiconductors. ON Semiconductor is known for providing a wide range of semiconductor components, including integrated circuits, discrete components, and customized solutions for power management, automotive, industrial, and consumer electronics applications. The company focuses on innovation and efficiency, offering products that help manage energy consumption and improve systems performance.
Application
The NC7SV126P5X is a single buffer with 3-state output, commonly used in digital circuits for signal buffering and driving applications. It is suitable for applications requiring signal amplification or isolation. Key application areas include:
1. Data Communication Systems: For signal integrity and data line driving.
2. Computing Devices: Used in microcontrollers and microprocessors for interfacing.
3. Consumer Electronics: Signal buffering in portable devices like smartphones and tablets.
4. Industrial Control Systems: Ensures reliable data transfer across bus lines.
5. Automotive Electronics: Used in control units for robust data handling.
Its small package size and low power consumption make it ideal for space-constrained and battery-powered applications.
1. Data Communication Systems: For signal integrity and data line driving.
2. Computing Devices: Used in microcontrollers and microprocessors for interfacing.
3. Consumer Electronics: Signal buffering in portable devices like smartphones and tablets.
4. Industrial Control Systems: Ensures reliable data transfer across bus lines.
5. Automotive Electronics: Used in control units for robust data handling.
Its small package size and low power consumption make it ideal for space-constrained and battery-powered applications.
Package
The NC7SV126P5X is a single buffer with 3-state output from ON Semiconductor, housed in a SC-70 package, which is a small form factor surface-mount package. It is designed for use in applications where space saving is a priority.
