사양
| 속성 | 가치 |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| Part Status | Obsolete |
| Switch Type | General Purpose |
| Number of Outputs | 8 |
| Ratio - Input: Output | 1:8 |
| Output Configuration | Low Side |
| Output Type | N-Channel |
| Interface | SPI |
| Voltage - Load | 3.3V, 5V |
| Current - Output (Max) | 600mA |
| Rds On (Typ) | 1.5Ohm |
| Fault Protection | Open Load Detect, Over Temperature |
| Operating Temperature | -40°C ~ 150°C (TJ) |
| Mounting Type | Surface Mount |
| Supplier Device Package | 24-SSOP |
개요
Description
NCV7240ADPR2G is an automotive-grade smart switch IC used to drive external loads (like solenoids, relays, lamps) with built-in protection and diagnostics. It typically provides one or more high-side switch channels, fault protection, and status reporting to a microcontroller.
Key features (typical):
- Wide supply range (often around 5–40 V)
- Current limiting and short-circuit protection
- Undervoltage and overtemperature protection
- Diagnostic feedback for fault conditions
- Often reverse-polarity protection
- Logic interface compatible with 3.3/5 V control
- RoHS-compliant package; ADPR2G denotes a specific package/reel variant
Common applications:
- Automotive body electronics, lighting, power solenoids
- Relay driving controlled by a microcontroller
Note: exact electrical specs, pinout, and package details depend on the specific variant. Check the official datasheet for NCV7240ADPR2G for precise figures and recommended operating conditions.
Key features (typical):
- Wide supply range (often around 5–40 V)
- Current limiting and short-circuit protection
- Undervoltage and overtemperature protection
- Diagnostic feedback for fault conditions
- Often reverse-polarity protection
- Logic interface compatible with 3.3/5 V control
- RoHS-compliant package; ADPR2G denotes a specific package/reel variant
Common applications:
- Automotive body electronics, lighting, power solenoids
- Relay driving controlled by a microcontroller
Note: exact electrical specs, pinout, and package details depend on the specific variant. Check the official datasheet for NCV7240ADPR2G for precise figures and recommended operating conditions.
Equivalent
NCV7240ADPR2G is a LIN transceiver (5V). Common cross-references include:
- Infineon TLE7240G
- NXP TJA1020 and TJA1021
- Microchip/MCP2003 and MCP2004
Note: check voltage range, data rate, wake-up features, and pinout/power pins to ensure proper compatibility for your design.
- Infineon TLE7240G
- NXP TJA1020 and TJA1021
- Microchip/MCP2003 and MCP2004
Note: check voltage range, data rate, wake-up features, and pinout/power pins to ensure proper compatibility for your design.
Features
Here are the key features of NCV7240ADPR2G (concise):
- 1-channel LIN transceiver for automotive networks
- MCU interface via RXD/TXD (LIN data path)
- Wake-up and sleep/low-power modes
- Low quiescent current in recessive state
- Vehicle-supply protection: undervoltage/overvoltage and short-circuit protection on the bus
- Bus I/O protection and ESD protection on pins
- Automotive-grade device with extended temperature range
- RoHS compliant
- Package: 8-pin (automotive small-outline/D‑P‑grade) with RoHS and AEC-ready capability
Note: For exact electrical specs (voltage ranges, current ratings, and timing), please refer to the latest datasheet.
- 1-channel LIN transceiver for automotive networks
- MCU interface via RXD/TXD (LIN data path)
- Wake-up and sleep/low-power modes
- Low quiescent current in recessive state
- Vehicle-supply protection: undervoltage/overvoltage and short-circuit protection on the bus
- Bus I/O protection and ESD protection on pins
- Automotive-grade device with extended temperature range
- RoHS compliant
- Package: 8-pin (automotive small-outline/D‑P‑grade) with RoHS and AEC-ready capability
Note: For exact electrical specs (voltage ranges, current ratings, and timing), please refer to the latest datasheet.
Pinout
- Pin count: 8 pins (SOP-8/SOIC-8 package variants)
- Function: Automotive high-side load switch with current limit and protection/diagnostic features (controls power to a load under a control input, with fault protection).
- Function: Automotive high-side load switch with current limit and protection/diagnostic features (controls power to a load under a control input, with fault protection).
Manufacturer
- Manufacturer: ON Semiconductor (onsemi).
- What kind of company: A U.S.-based multinational semiconductor company that designs and manufactures energy-efficient integrated circuits, discretes, and system solutions (auto, industrial, communications, consumer markets).
- What kind of company: A U.S.-based multinational semiconductor company that designs and manufactures energy-efficient integrated circuits, discretes, and system solutions (auto, industrial, communications, consumer markets).
Application
NCV7240ADPR2G is a LIN transceiver for automotive networks. Typical application areas:
- Automotive body electronics (lighting, door modules, seats, mirrors)
- Sensors/actuators interfaces on LIN subnets (HVAC, actuators, pedals)
- In-vehicle networks and gateways/subsystems
- Instrument clusters and infotainment subsystems
- Industrial automation using LIN-based 12V networks
Note: Designed for automotive/industrial environments with LIN communication requirements.
- Automotive body electronics (lighting, door modules, seats, mirrors)
- Sensors/actuators interfaces on LIN subnets (HVAC, actuators, pedals)
- In-vehicle networks and gateways/subsystems
- Instrument clusters and infotainment subsystems
- Industrial automation using LIN-based 12V networks
Note: Designed for automotive/industrial environments with LIN communication requirements.
Package
8-pin SOIC (surface-mount) package.
