사양
| 속성 | 가치 |
| Supplier | Nexperia USA Inc. |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Part Status | Active |
| Transistor Type | NPN - Pre-Biased |
| Current - Collector(Ic)(Max) | 100 mA |
| Voltage - Collector Emitter Breakdown(Max) | 50 V |
| Resistor - Base(R1) | 22 kOhms |
| Resistor - Emitter Base(R2) | 22 kOhms |
| DC Current Gain(h FE)(Min) @ Ic Vce | 60 @ 5mA, 5V |
| Vce Saturation(Max) @ Ib Ic | 150mV @ 500µA, 10mA |
| Current - Collector Cutoff(Max) | 1µA |
| Power - Max | 250 mW |
| Mounting Type | Surface Mount |
개요
Description
PDTC124ET is a digital transistor with an integrated base bias resistor. It lets a microcontroller drive a transistor- load directly (no external base resistor needed), simplifying interfacing to LEDs, small relays, or similar loads. The ET suffix denotes a RoHS/lead-free version; the trailing -215 is a package/lot variant code and may vary by supplier—check the exact datasheet for the specific device.
Typical features (variant dependent):
- NPN transistor with built-in base resistor
- Vce in the tens of volts range (commonly ~25–40 V)
- Ic in the tens of milliamps (commonly 50–100 mA, depending on variant)
- Very low external component count; compatible with 3.3/5 V logic
- Small SOT-23 or similar package
Applications: microcontroller I/O to LED indicators, small relays, optocouplers, and general purpose switching.
Note: for precise electricals (Vce, Ic, base resistor value) and the exact -215 variant details, consult the specific PDTC124ET-215 datasheet from your supplier.
Typical features (variant dependent):
- NPN transistor with built-in base resistor
- Vce in the tens of volts range (commonly ~25–40 V)
- Ic in the tens of milliamps (commonly 50–100 mA, depending on variant)
- Very low external component count; compatible with 3.3/5 V logic
- Small SOT-23 or similar package
Applications: microcontroller I/O to LED indicators, small relays, optocouplers, and general purpose switching.
Note: for precise electricals (Vce, Ic, base resistor value) and the exact -215 variant details, consult the specific PDTC124ET-215 datasheet from your supplier.
Features
PDTC124ET-215 is part of the PDTC digital-transistor family. Key features:
- NPN transistor with built-in base resistor (no external base resistor required)
- Optional built-in base-emitter resistor for improved turn-off/leakage control
- Direct drive from MCU/logic (TTL/CMOS compatible input levels)
- Low input current; high input impedance
- Suitable for switching modest loads (LEDs, small relays, etc.)
- Fast switching and low saturation when driving loads
- Small-package options (e.g., SOT-23-3) with tape/reel variant (-215)
- Vce and Ic ratings vary by exact part; check datasheet for exact electrical specs and temp range
Note: For precise voltages, currents, and packaging details, refer to the specific PDTC124ET-215 datasheet.
- NPN transistor with built-in base resistor (no external base resistor required)
- Optional built-in base-emitter resistor for improved turn-off/leakage control
- Direct drive from MCU/logic (TTL/CMOS compatible input levels)
- Low input current; high input impedance
- Suitable for switching modest loads (LEDs, small relays, etc.)
- Fast switching and low saturation when driving loads
- Small-package options (e.g., SOT-23-3) with tape/reel variant (-215)
- Vce and Ic ratings vary by exact part; check datasheet for exact electrical specs and temp range
Note: For precise voltages, currents, and packaging details, refer to the specific PDTC124ET-215 datasheet.
Pinout
Pin count: 3 (SOT‑23 package).
Function: NPN "digital" transistor with integrated base resistor and base–emitter resistor. The three pins are Base (input with built‑in series resistor), Collector (output to the load / to VCC through load), and Emitter (ground/reference). The “,215” suffix denotes tape‑and‑reel packaging.
Function: NPN "digital" transistor with integrated base resistor and base–emitter resistor. The three pins are Base (input with built‑in series resistor), Collector (output to the load / to VCC through load), and Emitter (ground/reference). The “,215” suffix denotes tape‑and‑reel packaging.
Manufacturer
- Manufacturer: ROHM Semiconductor (ROHM Co., Ltd.)
- Kind of company: A Japanese multinational electronics company that designs and manufactures semiconductors and electronic components (transistors, diodes, ICs, LEDs, power devices, etc.) for automotive and consumer applications.
- Kind of company: A Japanese multinational electronics company that designs and manufactures semiconductors and electronic components (transistors, diodes, ICs, LEDs, power devices, etc.) for automotive and consumer applications.
Application
PDTC124ET and PDTC215 are digital transistors with built‑in base resistors. They are used as convenient switches in low‑power circuits, directly interfacing microcontrollers with loads.
Common application areas:
- Driving LEDs and indicator lamps
- Switching relay coils and small solenoids
- Driving small DC motors or stepper drivers
- Optocoupler inputs
- Level shifting and general signal switching in automotive, consumer electronics, and industrial controls
Benefits: fewer external parts (no base resistor), MCU protection from base current surges, suitable for TTL/CMOS interfaces, fast switching, and good noise immunity.
Common application areas:
- Driving LEDs and indicator lamps
- Switching relay coils and small solenoids
- Driving small DC motors or stepper drivers
- Optocoupler inputs
- Level shifting and general signal switching in automotive, consumer electronics, and industrial controls
Benefits: fewer external parts (no base resistor), MCU protection from base current surges, suitable for TTL/CMOS interfaces, fast switching, and good noise immunity.
Package
PDTC124ET,215 is supplied in a SOT‑23 (3‑lead) surface‑mount package; the “,215” suffix denotes tape‑and‑reel packaging.
