사양
| 속성 | 가치 |
| Supplier | NXP USA Inc. |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Part Status | Last Time Buy |
| Type | RFID Reader |
| Frequency | 13.56MHz |
| Standards | FeliCa, ISO 14443, ISO 15693, ISO 18000, MIFARE, NFC |
| Interface | I²C |
| Voltage - Supply | 1.65V ~ 3.6V |
| Operating Temperature | -30°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
개요
Description
PN7120A0EV/C10801Y is NXP’s PN7120 NFC Frontend Evaluation Kit. It provides a ready-to-use platform to evaluate and prototype with the PN7120 as an NFC reader/writer and front-end (13.56 MHz) for contactless cards and tags. The board includes the PN7120, an antenna, and interfaces to a host MCU (SPI/I2C) or to a PC via USB. It ships with example firmware, a PC GUI and documentation to speed development of NFC applications (reader/writer, card emulation, etc.). You connect your microcontroller to the PN7120A0EV, load/demo the sample code, and test with standard NFC tags/cards. The C10801Y suffix denotes the specific kit variant/ordering code.
Features
Here are the core features of PN7120A0EV/C10801Y (NXP PN7120 NFC Frontend Evaluation Kit):
- 13.56 MHz NFC front-end (PN7120) for reader/writer and peer-to-peer (NFCIP-1) operation.
- Supports major standards: ISO/IEC 14443 Type A/B, ISO/IEC 15693; NFC Forum compatibility.
- NFC Peer-to-Peer mode for NFCIP-1 communication.
- MCU interfaces: SPI (primary) with optional I2C; 3.3V logic with level shifting.
- On-board RF electronics with an antenna, plus connectors for external RF coil.
- USB interface for PC tools and debugging; includes sample code and firmware.
- Software: NXP NFC Reader Library and example apps for rapid prototyping.
- Evaluation hardware: complete board with connectors, power options, and ready-to-run demos.
- Power options: USB or external supply.
Note: This kit is designed for development and evaluation of PN7120-based NFC applications, enabling quick testing of card read/write and P2P interactions with a host MCU.
- 13.56 MHz NFC front-end (PN7120) for reader/writer and peer-to-peer (NFCIP-1) operation.
- Supports major standards: ISO/IEC 14443 Type A/B, ISO/IEC 15693; NFC Forum compatibility.
- NFC Peer-to-Peer mode for NFCIP-1 communication.
- MCU interfaces: SPI (primary) with optional I2C; 3.3V logic with level shifting.
- On-board RF electronics with an antenna, plus connectors for external RF coil.
- USB interface for PC tools and debugging; includes sample code and firmware.
- Software: NXP NFC Reader Library and example apps for rapid prototyping.
- Evaluation hardware: complete board with connectors, power options, and ready-to-run demos.
- Power options: USB or external supply.
Note: This kit is designed for development and evaluation of PN7120-based NFC applications, enabling quick testing of card read/write and P2P interactions with a host MCU.
Pinout
- Pin count: 32 pins (PN7120 in a 32‑pin package on the PN7120A0EV/C10801Y board).
- Function: Evaluation/development board for the PN7120 NFC front‑end. Provides power (VDD/GND), host interface (I2C or SPI), interrupt (IRQ), reset (RST), enable (EN) and GPIOs to connect a microcontroller for NFC communication and testing.
- Function: Evaluation/development board for the PN7120 NFC front‑end. Provides power (VDD/GND), host interface (I2C or SPI), interrupt (IRQ), reset (RST), enable (EN) and GPIOs to connect a microcontroller for NFC communication and testing.
Manufacturer
- Manufacturer: NXP Semiconductors
- What kind of company: A Dutch multinational semiconductor company that designs and manufactures chips and system solutions for automotive, identification/secure access, IoT, and related applications.
- What kind of company: A Dutch multinational semiconductor company that designs and manufactures chips and system solutions for automotive, identification/secure access, IoT, and related applications.
Package
QFN-48 package (7×7 mm) for the PN7120 on the PN7120A0EV/C10801Y.
