이미지는 참조용입니다.
S25FL164K0XMFV010
+BOMIC FLASH 64MBIT SPI/QUAD 8SOIC
-
제조업체세프라스 반도체 회사
-
제조업체 부품 #S25FL164K0XMFV010
-
재고8039
365 1일 품질 보증
7*24 영업 시간 서비스 보증
90-판매 후 1일 보증
정품 보증
사양
| 속성 | 가치 |
| Series | FL1-K |
| Part Status | Obsolete |
| Digi Key Programmable | Not Verified |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NOR |
| Memory Size | 64Mbit |
| Memory Organization | 8M x 8 |
| Memory Interface | SPI - Quad I/O |
| Write Cycle Time - Word, Page | 3ms |
| Voltage - Supply | 2.7V ~ 3.6V |
| Operating Temperature | -40°C ~ 105°C (TA) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.209", 5.30mm Width) |
| Supplier Device Package | 8-SOIC |
| Base Product Number | S25FL164 |
| Clock Frequency | 108 MHz |
개요
Description
Key features include a wide operating voltage range from 2.7V to 3.6V, providing flexibility in various applications, and a high-speed operation with clock rates up to 104 MHz. It also includes security features like block protection and a write protection pin, ensuring data integrity and security. The device is well-suited for use in embedded systems, consumer electronics, and industrial applications, where reliable and efficient memory solutions are essential. Its endurance and data retention capabilities make it a robust choice for non-volatile memory needs.
Equivalent
1. Micron MT25QL064A
2. Winbond W25Q64FV
3. Macronix MX25L6406E
4. Adesto (Dialog Semiconductor) AT25XE064A
These alternatives offer similar capacities and interfaces, but ensure compatibility with application-specific requirements such as voltage and performance characteristics.
Features
1. Memory Capacity: 64 Mbit (8 MB) storage capacity, suitable for code storage and data retention in embedded systems.
2. Architecture: It uses a NOR flash architecture, which provides fast read speeds and is ideal for executing code directly from the memory.
3. Interface: Supports a Serial Peripheral Interface (SPI), which simplifies the connection to microcontrollers and other devices.
4. Performance: Offers fast read speeds with a maximum clock frequency of up to 104 MHz in SPI mode.
5. Voltage Range: Operates with a wide voltage range from 2.7V to 3.6V, making it versatile for various applications.
6. Endurance: Provides high reliability with a typical endurance of 100,000 program/erase cycles.
7. Data Retention: Guarantees data retention for up to 20 years, ensuring long-term reliability of stored data.
8. Package Options: Available in various compact package types, facilitating integration into space-constrained designs.
These features make it suitable for use in automotive, industrial, and consumer electronics applications.
Pinout
1. CS# (Chip Select): Activates the device. Low state enables it.
2. SO (Serial Output): Outputs data during read operations.
3. WP# (Write Protect): Used to protect certain regions of the memory from write operations.
4. VSS (Ground): Ground reference for the device.
5. SI (Serial Input): Accepts data input during write operations.
6. SCK (Serial Clock): Provides the clock signal for SPI communication.
7. HOLD# (Hold): Pauses the device operations without deselecting it.
8. VCC (Power Supply): Supplying power to the device.
This configuration supports SPI protocol operations for reading, writing, and erasing data, making it suitable for applications requiring reliable non-volatile storage.
Manufacturer
Application
1. Consumer Electronics: Storing firmware and software for devices like TVs, set-top boxes, and gaming consoles.
2. Industrial Systems: Used in programmable logic controllers (PLCs) and other automation equipment.
3. Automotive Electronics: Employed for infotainment systems, navigation, and driver assistance systems.
4. Networking: Utilized in routers, switches, and other communication devices for configuration data and boot code.
5. Medical Devices: Storing software and critical data in diagnostic and monitoring equipment.
These applications benefit from the memory's high-speed performance, reliability, and long data retention.