SC16IS750IPW

The SC16IS750IPW is a single-channel, I2C-bus/SPI bus interface to a UART (Universal Asynchronous Receiver/Transmitter), designed to manage communication between a microcontroller and serial devices. Manufactured by NXP Semiconductors, this device supports data rates up to 5 Mbit/s and includes support for I2C and SPI interfaces, making it highly versatile for various applications. The SC16IS750IPW features 64-byte FIFOs for both transmission and reception, which helps in handling high-speed data streams efficiently. It also supports automatic hardware and software flow control, ensuring reliable data transfer without overloading the receiver's buffer.
Additionally, the device includes a programmable baud rate generator, allowing flexible communication speed settings. The SC16IS750IPW is well-suited for applications requiring UART interface expansion, especially in embedded systems where I2C or SPI interfaces are predominant. It is often used in industrial automation, telecommunications, and consumer electronics. Its compact design and low power consumption make it ideal for space-constrained applications.

Equivalent products to the SC16IS750IPW, which is a UART with I2C/SPI interface, include the NXP SC18IS600 series, the MAX3107 from Maxim Integrated, and the TI TCA9548A for UART applications with I2C interfaces. Additionally, the MCP2221A from Microchip offers similar functionality but with USB interface capability. It's important to check the specific requirements of your application, such as interface, voltage, and package type, to ensure compatibility.

The SC16IS750IPW is a single-channel I2C-bus/SPI to UART bridge with several key features. It includes a 64-byte transmit and receive FIFO to optimize data transfer efficiency. The device supports data rates up to 5 Mbps in the UART interface, enabling high-speed communication. It also features GPIO pins that can be used for additional control purposes.
The SC16IS750IPW supports hardware flow control using RTS/CTS and software flow control with programmable Xon/Xoff characters. It is equipped with a programmable baud rate generator, allowing flexibility in setting communication speeds. The device's sleep mode helps reduce power consumption when not in active use.
The bridge provides an interrupt pin to signal UART events, enhancing real-time communication capabilities. It also supports 8-bit, 7-bit data formats, parity, and stop bits configuration for versatile protocol compliance. Packaged in a TSSOP-28, the SC16IS750IPW is suitable for space-constrained applications. It is commonly used in industrial automation, portable devices, and other applications requiring reliable serial communication.

The SC16IS750IPW is a single-channel UART (Universal Asynchronous Receiver/Transmitter) with an I²C-bus/SPI interface. It is designed to add a UART channel to a system that has only I²C or SPI interfaces. The device is packaged in a 20-pin TSSOP (Thin Shrink Small Outline Package).
Here is a brief overview of its pin count and functions:
- Pin Count: 20 pins
- Notable Pins:
- SDA/SO: Data line for I²C / SPI output
- SCL/SCLK: Clock line for I²C / SPI
- A0, A1: Address pins for I²C address selection
- RESET: Reset pin
- TX: UART Transmit
- RX: UART Receive
- CTS: Clear to Send (flow control)
- RTS: Request to Send (flow control)
- IRQ: Interrupt request
- CS: Chip select for SPI
The device serves functions like serial communication, configurability through I²C/SPI, and supports features such as programmable baud rates, FIFO buffers for data storage, and hardware/software flow control.

The SC16IS750IPW is manufactured by NXP Semiconductors. NXP Semiconductors is a global semiconductor company headquartered in Eindhoven, Netherlands. It is one of the leading suppliers of high-performance mixed-signal and standard product solutions. NXP specializes in automotive, consumer, and industrial market segments, providing solutions for secure connectivity and infrastructure. The company is known for its innovations in automotive chips, secure identification, wireless infrastructure, lighting, power management, and smart appliances.

The SC16IS750IPW is a single-channel I2C-bus/SPI to UART bridge, often used in applications requiring serial communication. Key application areas include:
1. Embedded Systems: Facilitates communication between microcontrollers and UART-based devices.
2. Industrial Automation: Used in automation equipment requiring reliable serial data exchange.
3. Consumer Electronics: Enables connectivity in devices like GPS receivers and Bluetooth modules.
4. Point-of-Sale Systems: Supports communication between various components such as receipt printers and barcode scanners.
5. Networking Equipment: Assists in the configuration and management of network devices through serial interfaces.
Its versatility in converting I2C/SPI to UART makes it suitable for numerous applications where space and resource constraints exist.

The SC16IS750IPW is a single UART with I²C-bus/SPI interface, and it comes in a TSSOP (Thin Shrink Small Outline Package) with 20 pins. This package type is compact and suitable for surface mounting on PCBs, offering a balance between size and performance for embedded applications.