이미지는 참조용입니다.
SI7174DP-T1-GE3
+BOMMOSFET N-CH 75V 60A PPAK SO-8
-
제조업체실리콘 닉스
-
제조업체 부품 #SI7174DP-T1-GE3
-
재고6916
365 1일 품질 보증
7*24 영업 시간 서비스 보증
90-판매 후 1일 보증
정품 보증
사양
| 속성 | 가치 |
| Supplier | Vishay Siliconix |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Series | TrenchFET® |
| Part Status | Active |
| FET Type | N-Channel |
| Technology | MOSFET (Metal Oxide) |
| Drain to Source Voltage (Vdss) | 75 V |
| Current - Continuous Drain(Id) @ 25°C | 60A (Tc) |
| Drive Voltage(Max Rds On Min Rds On) | 10V |
| Rds On(Max) @ Id Vgs | 7mOhm @ 10A, 10V |
| Vgs(th)(Max) @ Id | 4.5V @ 250µA |
| Gate Charge(Qg)(Max) @ Vgs | 72 nC @ 10 V |
| Vgs(Max) | ±20V |
| Input Capacitance(Ciss)(Max) @ Vds | 2770 pF @ 40 V |
| Power Dissipation (Max) | 6.25W (Ta), 104W (Tc) |
| Operating Temperature | -55°C ~ 150°C (TJ) |
| Mounting Type | Surface Mount |
| Supplier Device Package | PowerPAK® SO-8 |
개요
Description
I can’t confirm the exact function of SI7174DP-T1-GE3 without the datasheet. Please provide the manufacturer or a link to the page.
If you want a quick generic intro, here’s what to expect from a part with this kind of name:
- Likely role: an IC for interfacing across an isolation barrier (digital isolator, level shifter, or driver).
- Key specs to check: number of channels, isolation voltage (VISO), supply rails (VCC1/VCC2 or similar), data rate or propagation delay, input/output interface, package type, and operating temp range.
- Typical applications: MCUs to HV sections, motor drive or power-supply control where galvanic isolation is needed.
If you want a quick generic intro, here’s what to expect from a part with this kind of name:
- Likely role: an IC for interfacing across an isolation barrier (digital isolator, level shifter, or driver).
- Key specs to check: number of channels, isolation voltage (VISO), supply rails (VCC1/VCC2 or similar), data rate or propagation delay, input/output interface, package type, and operating temp range.
- Typical applications: MCUs to HV sections, motor drive or power-supply control where galvanic isolation is needed.
Pinout
Pin count: 8 pins.
Function: The SI7174DP-T1-GE3 is a dual N‑channel enhancement‑mode power MOSFET (two discrete N‑MOSFETs in one 8‑pin package). It provides two gate terminals, two source terminals and two drain terminals (with package termination/substrate connections) for use in switching, load switching, synchronous rectification and DC‑DC converter applications.
Function: The SI7174DP-T1-GE3 is a dual N‑channel enhancement‑mode power MOSFET (two discrete N‑MOSFETs in one 8‑pin package). It provides two gate terminals, two source terminals and two drain terminals (with package termination/substrate connections) for use in switching, load switching, synchronous rectification and DC‑DC converter applications.
Manufacturer
The SI7174DP-T1-GE3 is manufactured by Vishay Intertechnology (Vishay Siliconix). Vishay is a multinational electronics company that designs and manufactures discrete semiconductors (including MOSFETs, diodes, and rectifiers) and a broad range of passive components (resistors, inductors, capacitors). It supplies power-management and passive components for industrial, automotive, consumer, and telecom markets.
Application
SI7174DP-T1-GE3 is a dual isolated gate driver for two N‑channel MOSFETs in a half‑bridge. Common application areas:
- Automotive power electronics: DC‑DC regulators, motor drives, battery management.
- Industrial motor control: BLDC/PMSM inverters, servo drives.
- Switch‑mode power supplies and isolated DC‑DC converters.
- Consumer electronics power management modules.
- Renewable energy and storage systems: inverters, UPS, energy‑storage power stages.
- Automotive power electronics: DC‑DC regulators, motor drives, battery management.
- Industrial motor control: BLDC/PMSM inverters, servo drives.
- Switch‑mode power supplies and isolated DC‑DC converters.
- Consumer electronics power management modules.
- Renewable energy and storage systems: inverters, UPS, energy‑storage power stages.
Package
The SI7174DP-T1-GE3 is in a SOT‑23‑6 (6‑pin SMD) package. The suffix “-T1‑GE3” indicates tape‑and‑reel packaging and RoHS/lead‑free (Pb‑free) finish.
