이미지는 참조용입니다.

SN74AUC1G07YZPR

Name: SN74AUC1G07YZPR
Rating: 4.8 (15 reviews)

+BOM

IC BUFFER NON-INVERT 2.7V 5DSBGA

제조업체텍사스 인스트루먼트(주)
제조업체 부품 #SN74AUC1G07YZPR
데이터시트 SN74AUC1G07YZPR DataSheet
패키지 5-XFBGA, DSBGA
재고2326

365 1일 품질 보증

7*24 영업 시간 서비스 보증

90-판매 후 1일 보증

정품 보증

사양

속성	가치
Supplier	Texas Instruments,Rochester Electronics, LLC
Package	Tape & Reel (TR),Cut Tape (CT),Bulk
Series	74AUC
ProductStatus	Active
LogicType	Buffer, Non-Inverting
NumberofElements	1
NumberofBitsperElement	1
OutputType	Open Drain
Current-OutputHighLow	-, 9mA
Voltage-Supply	0.8V ~ 2.7V
OperatingTemperature	-40°C ~ 85°C (TA)
MountingType	Surface Mount
Package/Case	5-XFBGA, DSBGA

개요

Description

SN74AUC1G07YZPR is a single, non-inverting buffer gate from TI’s SN74AUC1G07 family. It takes one input and provides a buffered, non-inverted output, used to increase drive strength and isolate stages without changing logic levels.
Key points:
- Voltage range: 1.65 V to 3.6 V (suitable for 1.8/3.3 V systems).
- Input/Output: CMOS input thresholds with a push-pull (non-tri-stated) output.
- Performance: fast propagation suitable for general logic buffering; power consumption is low.
- Package: tiny SC-70/SOT-23-5 family package, suffix YZPR indicates the tape-and-reel packaging option.
Typical uses:
- Buffering signals, level bridging between domains sharing the same supply, and distributing signals in compact layouts.
For exact electrical specs (propagation delay, input/output current, dynamic characteristics), consult the SN74AUC1G07 datasheet.

Equivalent

Equivalents (same function: single, non‑inverting buffer, 1.65–3.6 V):
- Nexperia 74AUC1G07
- ON Semiconductor MC74AUC1G07
- 74LVC1G07 (LVC family cross‑class devices) from various vendors
Note: check exact voltage/pinout compatibility for your board when cross‑replacing.

Features

Concise features of SN74AUC1G07YZPR:
- Single buffer gate (1-bit) with non-inverting output
- Open-drain output (requires external pull-up)
- Ioff technology for partial-power-down protection
- Wide Vcc range typical for AUC family (low-voltage operation)
- Low static power with high-impedance when off
- CMOS/TTL input-compatible
- ESD protection and robust over-voltage tolerance
- Small package (YZPR) suitable for compact designs
- Suitable for level-shifting and bus-sharing applications
Note: For exact electrical specs (Vcc range, propagation delay, pull-up requirements, temperature range, and package details), please refer to the TI datasheet.

Pinout

- Pin count: 5 pins (SC-70/SOT-23-5 package)
- Function: SN74AUC1G07YZPR is a single non-inverting buffer with a 3-state (tri‑state) output. Inputs: A, OE; Output: Y. When OE is asserted, Y follows A; when OE is deasserted, Y is high-impedance.

Manufacturer

Manufacturer: Texas Instruments (TI).
What kind of company: TI is an American multinational semiconductor company that designs and manufactures a wide range of integrated circuits, including analog, digital, and embedded processing ICs, for global electronics markets.

Application

SN74AUC1G07YZPR is a single non-inverting buffer/driver with tri-state output (AUC1G07). Typical applications:
- Level shifting/buffering between devices operating on 1.65–3.6 V.
- Bus buffering and I/O expansion with tri-state capability (shared data lines between MCU/FPGA and peripherals).
- Signal conditioning/isolating to memory, sensors, or other ICs, reducing load and fan-out.
- Driving moderate-capacitance loads with fast edges in high-speed digital circuits.
- Power-sensitive, compact embedded system signal routing and integrity improvements.