SN74CBT16211ADGG

The SN74CBT16211ADGG is a 24-bit FET bus-exchange switch manufactured by Texas Instruments. It is designed to allow bidirectional communication between buses, making it suitable for a variety of data routing applications. The device operates with a supply voltage range of 4V to 5.5V and features low ON-state resistance, ensuring minimal signal degradation. Its pin-to-pin delay is nearly zero, allowing high-speed signal switching, and it supports live-insertion applications, thanks to its overvoltage-tolerant data inputs.
Key features include a 5V-tolerant I/O, 25Ω ON-state resistance, and 24-bit width for wide data bus applications. The SN74CBT16211ADGG's architecture is optimized for low power consumption, with a maximum power dissipation of around 0.5W. It is housed in a TSSOP (thin-shrink small outline package), which facilitates efficient heat dissipation and board space savings. The device is commonly used in digital applications requiring rapid and reliable data routing, such as memory interfacing and data distribution within complex electronic systems. It is part of the CBT family, known for high-speed analog and digital switching capabilities.

The SN74CBT16211ADGG is a 24-bit FET bus exchange switch from Texas Instruments. Equivalent products from other manufacturers might include:
1. ON Semiconductor: NLASB3163
2. NXP: CBTLV16211
3. Renesas Electronics: 74CBTLV16211
Always cross-reference datasheets to ensure compatibility concerning pin configuration, voltage levels, and signal integrity for specific applications.

The SN74CBT16211ADGG is a 24-bit FET bus-exchange switch that enables high-speed data transfer. Key features include:
1. High-Speed Operation: Supports data transfer speeds up to 500 MHz, making it suitable for high-performance applications.
2. Low On-Resistance: Offers low on-state resistance, typically 4Ω, minimizing signal distortion.
3. TTL-Compatible Inputs: Compatible with TTL logic levels, facilitating easy integration with digital circuits.
4. Wide Power Supply Range: Operates from a 4V to 5.5V power supply, providing flexibility in system designs.
5. Bidirectional Data Flow: Allows data to flow in both directions, enhancing versatility in signal routing.
6. Power-Off Isolation: Ensures isolation of bus lines when the device is powered off, preventing undesired signal paths.
7. Hot Insertion Capability: Supports hot swapping, allowing the device to be inserted or removed without causing damage.
8. Latch-Up Immunity: Offers high latch-up immunity, enhancing reliability in various operating environments.
9. Compact Package: Available in a TSSOP package, suitable for space-constrained applications.
These features make the SN74CBT16211ADGG ideal for applications requiring efficient data routing and signal integrity.

The SN74CBT16211ADGG is a 24-bit TTL-compatible bus switch designed by Texas Instruments, housed in a 48-pin Thin Shrink Small Outline Package (TSSOP). It functions as a high-speed bus switch, helping facilitate communication between different parts of a digital system without the added delay of buffering.
The device allows for two-way data transfer and features a low on-state resistance, making it suitable for applications that require minimal signal distortion and fast switching. It supports live-insertion and hot-plugging through its powered-down high-impedance state, enhancing its flexibility in dynamic environments.
Key features include the ability to isolate bus lines, reduce capacitive loading, and maintain the integrity of high-speed signals. Each switch has independent enable controls, allowing for versatile operation and control over data flow.

The SN74CBT16211ADGG is manufactured by Texas Instruments (TI). Texas Instruments is a global semiconductor company based in Dallas, Texas, known for designing and manufacturing a broad range of integrated circuits and semiconductor solutions. TI's products are widely used in various industries, including consumer electronics, automotive, industrial, and communications. The company is particularly recognized for its analog and embedded processing products.

The SN74CBT16211ADGG is a 24-bit bus-exchange switch designed for applications requiring high-speed data transfer and low on-resistance. It is commonly used in digital signal routing, data multiplexing, and bus isolation in computing and telecommunication systems. Key application areas include memory module interfacing, backplane interconnects, and crossbar switching for efficient data management. Its ability to facilitate bidirectional data flow and reduce signal distortion makes it suitable for complex data networks, where it enhances signal integrity and improves performance in systems such as servers, routers, and network switches.

The SN74CBT16211ADGG is available in a TSSOP (Thin Shrink Small Outline Package) with 48 pins. This package is designed for surface-mount technology and offers a compact footprint suitable for dense board designs.