사양
| 속성 | 가치 |
| Package | Tray |
| Series | STM32F1 |
| ProductStatus | Active |
| CoreProcessor | ARM® Cortex®-M3 |
| CoreSize | 32-Bit Single-Core |
| Speed | 72MHz |
| Connectivity | CANbus, I²C, IrDA, LINbus, SPI, UART/USART, USB |
| Peripherals | DMA, Motor Control PWM, PDR, POR, PVD, PWM, Temp Sensor, WDT |
| NumberofI/O | 80 |
| ProgramMemorySize | 384KB (384K x 8) |
| ProgramMemoryType | FLASH |
| RAMSize | 64K x 8 |
| Voltage-Supply(Vcc/Vdd) | 2V ~ 3.6V |
| DataConverters | A/D 16x12b; D/A 2x12b |
| OscillatorType | Internal |
| OperatingTemperature | -40°C ~ 105°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 100-LQFP |
개요
Description
STM32F103VDT7 is a 32‑bit MCU from STMicroelectronics in the STM32F1 family. Key points:
- Core: ARM Cortex‑M3 up to 72 MHz.
- Package: 100‑pin LQFP (VDT7 variant); memory size varies by device (hundreds of KB of flash, tens of KB of RAM are common in VD devices).
- Peripherals: USB 2.0 Full‑Speed, CAN, multiple USART/SPI/I2C, up to 16‑channel 12‑bit ADC, timers (including advanced timers), and PWM. Some variants include DAC.
- Power: operates around 2.0–3.6 V with several low‑power modes.
- Development: strong ecosystem (HAL/LL drivers in STM32CubeMX, wide IDE/tool support).
- Use cases: general purpose MCU for motor control, USB devices, embedded industrial/applications.
Note: exact memory sizes, peripheral counts, and features depend on the specific VD7 variant. Check the official datasheet and reference manual for precise specs.
- Core: ARM Cortex‑M3 up to 72 MHz.
- Package: 100‑pin LQFP (VDT7 variant); memory size varies by device (hundreds of KB of flash, tens of KB of RAM are common in VD devices).
- Peripherals: USB 2.0 Full‑Speed, CAN, multiple USART/SPI/I2C, up to 16‑channel 12‑bit ADC, timers (including advanced timers), and PWM. Some variants include DAC.
- Power: operates around 2.0–3.6 V with several low‑power modes.
- Development: strong ecosystem (HAL/LL drivers in STM32CubeMX, wide IDE/tool support).
- Use cases: general purpose MCU for motor control, USB devices, embedded industrial/applications.
Note: exact memory sizes, peripheral counts, and features depend on the specific VD7 variant. Check the official datasheet and reference manual for precise specs.
Features
Key features of STM32F103VDT7 (100-pin LQFP):
- Core: 32-bit ARM Cortex-M3, up to 72 MHz
- Memory: 128 KB Flash, 20 KB SRAM
- Package/IO: 100-pin LQFP (VDT7), up to ~37 GPIOs
- Supply: 2.0–3.6 V operating voltage; industrial temperature range
- USB: USB 2.0 full-speed device (Connectivity/USB-capable variants)
- CAN: CAN 2.0B controller
- Peripherals: multiple USARTs, SPI, I2C interfaces
- ADC: 12-bit ADC, multiple input channels
- Timers: advanced TIM1 plus TIM2–TIM5 (general-purpose) and TIM6/7 (basic)
- DMA: DMA controller for memory/peripheral transfers
- CRC: hardware CRC unit
- RTC: Real-Time Clock with backup domain
- Power modes: Sleep, Stop, and Standby
- Debug: JTAG/SWD support
- Other: Flash option bytes and boot from flash capability
Notes: exact USB/CAN/peripheral counts depend on the specific sub-family variant; this device is a high-pin-count member of the STM32F103 family.
- Core: 32-bit ARM Cortex-M3, up to 72 MHz
- Memory: 128 KB Flash, 20 KB SRAM
- Package/IO: 100-pin LQFP (VDT7), up to ~37 GPIOs
- Supply: 2.0–3.6 V operating voltage; industrial temperature range
- USB: USB 2.0 full-speed device (Connectivity/USB-capable variants)
- CAN: CAN 2.0B controller
- Peripherals: multiple USARTs, SPI, I2C interfaces
- ADC: 12-bit ADC, multiple input channels
- Timers: advanced TIM1 plus TIM2–TIM5 (general-purpose) and TIM6/7 (basic)
- DMA: DMA controller for memory/peripheral transfers
- CRC: hardware CRC unit
- RTC: Real-Time Clock with backup domain
- Power modes: Sleep, Stop, and Standby
- Debug: JTAG/SWD support
- Other: Flash option bytes and boot from flash capability
Notes: exact USB/CAN/peripheral counts depend on the specific sub-family variant; this device is a high-pin-count member of the STM32F103 family.
Pinout
- Pin count: 64 pins (LQFP-64, DT package).
- Function: 32‑bit ARM Cortex‑M3 microcontroller (STM32F103V series) for embedded applications, with integrated flash RAM and peripherals (GPIO, timers, ADC, and serial interfaces such as USART/SPI/I2C; USB on some variants).
- Function: 32‑bit ARM Cortex‑M3 microcontroller (STM32F103V series) for embedded applications, with integrated flash RAM and peripherals (GPIO, timers, ADC, and serial interfaces such as USART/SPI/I2C; USB on some variants).
Manufacturer
- Manufacturer: STMicroelectronics (ST), the maker of the STM32 line, including the STM32F103VDT7.
- What kind of company: A global semiconductor and electronics company (multinational) headquartered in Geneva, Switzerland, designing and manufacturing microcontrollers, sensors, power devices, MEMS, and other integrated circuits.
- What kind of company: A global semiconductor and electronics company (multinational) headquartered in Geneva, Switzerland, designing and manufacturing microcontrollers, sensors, power devices, MEMS, and other integrated circuits.
Application
STM32F103VDT7 is a high‑performance 72 MHz Cortex‑M3 MCU. Typical application areas include:
- Industrial automation and process control
- Motor control (DC/stepper/brushless) and power electronics
- USB-connected devices and peripherals
- Data acquisition and instrumentation
- Consumer electronics, home appliances and smart devices
- Portable and battery-powered instruments and handheld controllers
- Embedded control for sensors and intelligent systems
(Uses include GPIO, ADC/DAC, timers/PWM, and communication peripherals like USB/CAN where available.)
- Industrial automation and process control
- Motor control (DC/stepper/brushless) and power electronics
- USB-connected devices and peripherals
- Data acquisition and instrumentation
- Consumer electronics, home appliances and smart devices
- Portable and battery-powered instruments and handheld controllers
- Embedded control for sensors and intelligent systems
(Uses include GPIO, ADC/DAC, timers/PWM, and communication peripherals like USB/CAN where available.)
Package
LQFP-100 (14×14 mm) quad-flat package.
