사양
| 속성 | 가치 |
| Supplier | STMicroelectronics |
| Package / Case | Tray |
| Series | STM32G0 |
| Part Status | Active |
| Core Processor | ARM® Cortex®-M0+ |
| Core Size | 32-Bit Single-Core |
| Speed | 64MHz |
| Connectivity | HDMI-CEC, I²C, IrDA, LINbus, SPI, UART/USART, USB |
| Peripherals | Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT |
| Number of I/O | 26 |
| Program Memory Size | 128KB (128K x 8) |
| Program Memory Type | FLASH |
| RAM Size | 36K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.71V ~ 3.6V |
| Data Converters | A/D 11x12b; D/A 2x12b |
| Oscillator Type | Internal |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
개요
Description
STM32G071GBU6N is a mid‑density MCU from STMicroelectronics’ STM32G0 family. It uses an ARM Cortex‑M0+ core running up to 64 MHz. Memory varies by variant; for this part family, typical devices offer around 128 KB of flash and 16 KB of RAM (check the exact datasheet for BU6N). Peripherals include USB Full‑Speed device, multiple UARTs/USARTs, SPI, I2C, 12‑bit ADCs, DAC, op‑amps and comparators, plus timers, RTC, and DMA. Some G0 parts also feature an LCD controller. It operates from a 1.65–3.6 V supply and supports low‑power modes suitable for battery-powered applications. The device comes in a 48‑pin BU package. Development is supported by the standard STM32CubeMX tooling and HAL/LL libraries, with a broad ecosystem of middleware and example projects. Ideal for USB‑enabled, cost‑efficient embedded applications requiring mixed digital/analog peripherals. For exact Flash/RAM size, package options, and feature set, refer to the official datasheet for STM32G071GBU6N.
Features
Key features of STM32G071GBU6N (brief):
- 32-bit ARM Cortex-M0+ core, up to 64 MHz
- Flash memory up to 256 KB and RAM up to about 40 KB
- USB Full-Speed (device) interface
- Analog: 12-bit ADC (up to ~16 channels); 12-bit DAC
- Timers: multiple general-purpose timers (with PWM), plus SysTick
- Communication: USART/UART, SPI, I2C (and I2S)
- DMA controller for efficient data transfers
- Hardware CRC engine
- Low-power modes: Run, Sleep, Stop, Standby; RTC wakeup
- Wide supply: 1.65–3.6 V; operation typically from -40°C to 85°C
- Debug and development: SWD; built-in bootloader support
- Package: 64-pin variant (GBU6N) suitable for space-constrained designs
Note: exact memory sizes, peripheral counts, and operating conditions may vary by package and revision; consult the datasheet for your exact device variant.
- 32-bit ARM Cortex-M0+ core, up to 64 MHz
- Flash memory up to 256 KB and RAM up to about 40 KB
- USB Full-Speed (device) interface
- Analog: 12-bit ADC (up to ~16 channels); 12-bit DAC
- Timers: multiple general-purpose timers (with PWM), plus SysTick
- Communication: USART/UART, SPI, I2C (and I2S)
- DMA controller for efficient data transfers
- Hardware CRC engine
- Low-power modes: Run, Sleep, Stop, Standby; RTC wakeup
- Wide supply: 1.65–3.6 V; operation typically from -40°C to 85°C
- Debug and development: SWD; built-in bootloader support
- Package: 64-pin variant (GBU6N) suitable for space-constrained designs
Note: exact memory sizes, peripheral counts, and operating conditions may vary by package and revision; consult the datasheet for your exact device variant.
Pinout
Pin count: 64 pins (64-pin package).
Function: STM32G071GBU6N is a 32‑bit ARM Cortex‑M0+ microcontroller from the STM32G071 family, intended for general‑purpose embedded control. It integrates the CPU with on‑chip peripherals such as USB Full‑Speed, CAN, SPI, I2C, USART, ADCs, DAC, timers, and other system peripherals, suitable for mixed‑signal applications.
Function: STM32G071GBU6N is a 32‑bit ARM Cortex‑M0+ microcontroller from the STM32G071 family, intended for general‑purpose embedded control. It integrates the CPU with on‑chip peripherals such as USB Full‑Speed, CAN, SPI, I2C, USART, ADCs, DAC, timers, and other system peripherals, suitable for mixed‑signal applications.
Manufacturer
Manufacturer: STMicroelectronics (ST).
What kind of company: A multinational electronics and semiconductor company headquartered in Geneva, Switzerland. It was formed in 1987 by the merger of Italy’s SGS Microelettronica and France’s Thomson Semiconducteurs. ST designs and manufactures a wide range of semiconductor products, including microcontrollers (STM32), sensors, power management ICs, and more.
What kind of company: A multinational electronics and semiconductor company headquartered in Geneva, Switzerland. It was formed in 1987 by the merger of Italy’s SGS Microelettronica and France’s Thomson Semiconducteurs. ST designs and manufactures a wide range of semiconductor products, including microcontrollers (STM32), sensors, power management ICs, and more.
Application
Applications for STM32G071GBU6N:
- IoT edge nodes and battery-powered smart sensors
- USB-enabled peripherals, data acquisition and instrumentation
- Consumer and smart home devices (remote controls, displays, meters)
- Portable medical/fitness devices and handheld meters
- Small industrial automation and human–machine interfaces
- Analog-intensive sensor conditioning and basic signal processing
- Prototyping, evaluation kits, and educational projects
These MCUs suit low-power, cost-effective embedded solutions with USB, ADCs, and flexible timers.
- IoT edge nodes and battery-powered smart sensors
- USB-enabled peripherals, data acquisition and instrumentation
- Consumer and smart home devices (remote controls, displays, meters)
- Portable medical/fitness devices and handheld meters
- Small industrial automation and human–machine interfaces
- Analog-intensive sensor conditioning and basic signal processing
- Prototyping, evaluation kits, and educational projects
These MCUs suit low-power, cost-effective embedded solutions with USB, ADCs, and flexible timers.
Package
LQFP64 (64-pin LQFP) package.
