사양
| 속성 | 가치 |
| Supplier | STMicroelectronics |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Series | STM32L0 |
| Part Status | Active |
| Core Processor | ARM® Cortex®-M0+ |
| Core Size | 32-Bit Single-Core |
| Speed | 32MHz |
| Connectivity | I²C, IrDA, SPI, UART/USART |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Number of I/O | 24 |
| Program Memory Size | 16KB (16K x 8) |
| Program Memory Type | FLASH |
| EEPROM Size | 512 x 8 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.65V ~ 3.6V |
| Data Converters | A/D 10x12b |
| Oscillator Type | Internal |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
개요
Description
STM32L011G4U6TR is STMicroelectronics’ ultra-low-power MCU from the STM32L0 family. It uses a 32‑bit ARM Cortex‑M0+ core, runs up to 32 MHz, and targets battery-powered/IoT applications with very low active and sleep currents and multiple energy modes. The G4U6 variant defines the on‑chip Flash/RAM sizes and package; exact memory is specified in the datasheet. Peripherals typically include GPIO, timers (PWM), ADC, I2C, SPI, UART, DMA, and RTC. It supports power-saving features like stop/sleep modes and VBAT backup, making it suitable for sensors, wearables, environmental monitors, and other micro‑power nodes. Development is supported by ST tools (STM32CubeMX, HAL/LL libraries). For precise specs, consult the official datasheet/product page; the TR suffix denotes tape‑and‑reel packaging.
Features
STM32L011G4U6TR is an ultra‑low‑power MCU from ST’s STM32L0 family. Key features:
- 32-bit ARM Cortex‑M0+ core, up to 32 MHz
- Memory: up to about 32 KB Flash and up to 8 KB RAM (device/package dependent)
- Supply: 1.65–3.6 V; wide operating temp (industrial range)
- Low‑power modes: Sleep, Stop, Standby; very low current in Stop mode
- Analog: 12‑bit ADC; basic analog features
- Timers/RTC: multiple 16‑bit timers and RTC; watchdog
- DMA and CRC accelerator
- Peripherals: I2C, SPI, and USART/UART (multiple instances)
- Debug/trace: SWD/JTAG support
- Packaging: compact footprint, TR (Tape & Reel) variant
Note: exact Flash/RAM size and peripheral counts vary by package/variant; consult the datasheet for the specific configuration.
- 32-bit ARM Cortex‑M0+ core, up to 32 MHz
- Memory: up to about 32 KB Flash and up to 8 KB RAM (device/package dependent)
- Supply: 1.65–3.6 V; wide operating temp (industrial range)
- Low‑power modes: Sleep, Stop, Standby; very low current in Stop mode
- Analog: 12‑bit ADC; basic analog features
- Timers/RTC: multiple 16‑bit timers and RTC; watchdog
- DMA and CRC accelerator
- Peripherals: I2C, SPI, and USART/UART (multiple instances)
- Debug/trace: SWD/JTAG support
- Packaging: compact footprint, TR (Tape & Reel) variant
Note: exact Flash/RAM size and peripheral counts vary by package/variant; consult the datasheet for the specific configuration.
Pinout
- Pin count: 20 pins (UQFN-20 package).
- Function: 32‑bit ARM Cortex‑M0+ microcontroller from the STM32L0 family (ultra‑low‑power MCU for simple control/sensor tasks).
- Function: 32‑bit ARM Cortex‑M0+ microcontroller from the STM32L0 family (ultra‑low‑power MCU for simple control/sensor tasks).
Manufacturer
- Manufacturer: STMicroelectronics (ST).
- What kind of company: A multinational semiconductor company that designs, manufactures, and sells integrated circuits and semiconductor devices (including microcontrollers, sensors, MEMS, and power management ICs). Headquartered in Geneva, Switzerland (registered in the Netherlands).
- What kind of company: A multinational semiconductor company that designs, manufactures, and sells integrated circuits and semiconductor devices (including microcontrollers, sensors, MEMS, and power management ICs). Headquartered in Geneva, Switzerland (registered in the Netherlands).
Application
STM32L011G4U6TR is a ultra-low-power MCU (Cortex-M0+), suitable for battery-powered and energy-efficient applications. Common use areas:
- Battery-powered sensors and IoT endpoints (environmental, industrial, smart home)
- Wearables and portable medical/fitness devices
- Data loggers and handheld measurement tools
- Smart metering, energy monitoring, and home automation controllers
- Low-power control of sensors/actuators in industrial automation
- Embedded systems with duty-cycled wake-up and long standby life
In short: any application needing long battery life and low power consumption with robust MCU performance.
- Battery-powered sensors and IoT endpoints (environmental, industrial, smart home)
- Wearables and portable medical/fitness devices
- Data loggers and handheld measurement tools
- Smart metering, energy monitoring, and home automation controllers
- Low-power control of sensors/actuators in industrial automation
- Embedded systems with duty-cycled wake-up and long standby life
In short: any application needing long battery life and low power consumption with robust MCU performance.
Package
Package type: 20-pin UFQFPN (leadless) package; the -TR suffix indicates Tape & Reel.
