사양
| 속성 | 가치 |
| Supplier | STMicroelectronics |
| Package | Tray |
| Series | STM32L4 |
| ProductStatus | Active |
| CoreProcessor | ARM® Cortex®-M4 |
| CoreSize | 32-Bit Single-Core |
| Speed | 80MHz |
| Connectivity | CANbus, I²C, IrDA, LINbus, MMC/SD, QSPI, SAI, SPI, SWPMI, UART/USART, USB |
| Peripherals | Brown-out Detect/Reset, DMA, LCD, PWM, WDT |
| NumberofI/O | 83 |
| ProgramMemorySize | 256KB (256K x 8) |
| ProgramMemoryType | FLASH |
| RAMSize | 64K x 8 |
| Voltage-Supply(Vcc/Vdd) | 1.71V ~ 3.6V |
| DataConverters | A/D 16x12b; D/A 2x12b |
| OscillatorType | Internal |
| OperatingTemperature | -40°C ~ 125°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 100-LQFP |
개요
Description
STM32L433VCT3 is an ultra-low-power 32‑bit MCU from STMicroelectronics’ STM32L4 family. It uses an ARM Cortex‑M4F core (DSP/FPU) and can run up to about 80 MHz, providing a good balance of performance and energy efficiency for battery-powered and sensor‑rich apps.
Key points:
- Core and performance: Cortex‑M4F with DSP/FPU for efficient signal processing.
- Power: multiple run/stop/standby modes and voltage scaling for very low energy use (typical supply 1.65–3.6 V).
- Peripherals: USB Full‑Speed, LCD controller, timers, DMA, SPI/I2C/UART, 12‑bit ADCs, DACs, RNG, and a hardware crypto engine.
- Memory: flash and RAM sizes vary by package; designed for compact, cost‑effective implementations.
- Package: VCT3 indicates a specific physical variant/package.
- Development: supported by STCubeMX/HAL/LL libraries and STM32CubeIDE.
Typical applications: wearables, portable medical devices, sensors, and IoT nodes requiring low power with decent performance.
Key points:
- Core and performance: Cortex‑M4F with DSP/FPU for efficient signal processing.
- Power: multiple run/stop/standby modes and voltage scaling for very low energy use (typical supply 1.65–3.6 V).
- Peripherals: USB Full‑Speed, LCD controller, timers, DMA, SPI/I2C/UART, 12‑bit ADCs, DACs, RNG, and a hardware crypto engine.
- Memory: flash and RAM sizes vary by package; designed for compact, cost‑effective implementations.
- Package: VCT3 indicates a specific physical variant/package.
- Development: supported by STCubeMX/HAL/LL libraries and STM32CubeIDE.
Typical applications: wearables, portable medical devices, sensors, and IoT nodes requiring low power with decent performance.
Equivalent
Clarifying question: Do you want (a) STMicroelectronics equivalents within the STM32L4 family (pin‑compatible, same package), or (b) cross‑vendor equivalents (NXP, Microchip, etc.)? Also confirm package (e.g., LQFP48/64) and the required memory/peripherals. With that, I can list exact substitutes or cross-references.
Pinout
- Pin count: 100 pins (LQFP-100 package)
- Function: 32-bit ARM Cortex-M4 microcontroller (STM32L4 series) for embedded apps, with integrated Flash/RAM and multiple peripherals; supports up to high-speed operation and low-power modes.
- Function: 32-bit ARM Cortex-M4 microcontroller (STM32L4 series) for embedded apps, with integrated Flash/RAM and multiple peripherals; supports up to high-speed operation and low-power modes.
Manufacturer
Manufacturer: STMicroelectronics (ST).
STMicroelectronics is a multinational electronics and semiconductor company headquartered in Geneva, Switzerland. Founded in 1987 from the merger of SGS Microelettronica (Italy) and Thomson Semiconductors (France), it designs and manufactures a broad range of semiconductor products, including the STM32 family of microcontrollers, MEMS sensors, analog devices, and power management ICs for automotive, industrial, consumer, and embedded applications.
STMicroelectronics is a multinational electronics and semiconductor company headquartered in Geneva, Switzerland. Founded in 1987 from the merger of SGS Microelettronica (Italy) and Thomson Semiconductors (France), it designs and manufactures a broad range of semiconductor products, including the STM32 family of microcontrollers, MEMS sensors, analog devices, and power management ICs for automotive, industrial, consumer, and embedded applications.
Application
STM32L433VCT3 is suited for ultra-low-power applications such as:
- Wearables and portable medical devices (long battery life)
- IoT endpoints, sensor nodes, data loggers
- Industrial and building automation (sensors, meters)
- Smart metering and energy monitoring
- Consumer electronics and human–machine interfaces (low-power displays)
- Security-enabled embedded systems (crypto, secure boot, authentication)
- Environmental monitoring and agricultural sensors
These cover its low-power, small-footprint, MCU features and security capabilities.
- Wearables and portable medical devices (long battery life)
- IoT endpoints, sensor nodes, data loggers
- Industrial and building automation (sensors, meters)
- Smart metering and energy monitoring
- Consumer electronics and human–machine interfaces (low-power displays)
- Security-enabled embedded systems (crypto, secure boot, authentication)
- Environmental monitoring and agricultural sensors
These cover its low-power, small-footprint, MCU features and security capabilities.
Package
LQFP-64 package (14×14 mm) for STM32L433VCT3.
