사양
| 속성 | 가치 |
| Package | Bulk |
| ProductStatus | Obsolete |
개요
Description
Introduction to TDA21471
- The TDA21471 is an audio power amplifier IC from the Philips/NXP TDA family, used to drive speakers in consumer audio equipment.
- It is a multi-channel (typically two-channel) class AB audio power amplifier with built-in protection features.
- Key protections: thermal shutdown, short-circuit/current limiting, undervoltage protection, and often mute/standby control and soft-start.
- Power and operation: designed for single-supply operation in the low-to-mid volt range (often around 8–18 V); output power depends on configuration, load, and heatsinking; may use bridge-tied-load (BTL) or single-ended outputs.
- External circuitry: requires standard audio input/gain networks, output coupling or DC-block capacitors, and sometimes bootstrap or feedback components; proper heat sinking is important for higher power.
- Applications: hi-fi amplifiers, home theater, car audio, and multimedia speakers.
- How to use: refer to the datasheet for exact pinout, recommended application circuit, gain settings, and thermal design guidelines.
- The TDA21471 is an audio power amplifier IC from the Philips/NXP TDA family, used to drive speakers in consumer audio equipment.
- It is a multi-channel (typically two-channel) class AB audio power amplifier with built-in protection features.
- Key protections: thermal shutdown, short-circuit/current limiting, undervoltage protection, and often mute/standby control and soft-start.
- Power and operation: designed for single-supply operation in the low-to-mid volt range (often around 8–18 V); output power depends on configuration, load, and heatsinking; may use bridge-tied-load (BTL) or single-ended outputs.
- External circuitry: requires standard audio input/gain networks, output coupling or DC-block capacitors, and sometimes bootstrap or feedback components; proper heat sinking is important for higher power.
- Applications: hi-fi amplifiers, home theater, car audio, and multimedia speakers.
- How to use: refer to the datasheet for exact pinout, recommended application circuit, gain settings, and thermal design guidelines.
Equivalent
Do you need pin-for-pin equivalents for the TDA21471 (NXP/Philips) audio amplifier? If so, please share specs: supply voltage, output power, load impedance, and package. Without these, I can’t give reliable substitutes. Once you confirm, I’ll provide direct cross-references from NXP/ST/On Semi/TI or the closest pin-compatible alternatives.
Features
TDA21471 features (highlights)
- Dual audio power amplifier with bridge-tied outputs (BTL) in Class-AB.
- 2 independent channels suitable for stereo or bridged (mono) configurations.
- Built-in protections: thermal shutdown, current limiting, overcurrent/short-circuit to GND or Vcc, and undervoltage protection.
- Pop-free start-up with mute/standby control.
- Fault diagnostic/flag output for status monitoring.
- Wide supply voltage range (per datasheet, enabling operation from low to moderate voltages).
- Capable of driving low-impedance loads (e.g., 4–8 ohms) with good efficiency.
- Low quiescent current and good audio performance (low distortion/noise).
- Designed for consumer/auto audio applications with robust protection in a compact package.
Note: exact output-power ratings depend on version and load; consult the datasheet for specific wattage and recommended typical applications.
- Dual audio power amplifier with bridge-tied outputs (BTL) in Class-AB.
- 2 independent channels suitable for stereo or bridged (mono) configurations.
- Built-in protections: thermal shutdown, current limiting, overcurrent/short-circuit to GND or Vcc, and undervoltage protection.
- Pop-free start-up with mute/standby control.
- Fault diagnostic/flag output for status monitoring.
- Wide supply voltage range (per datasheet, enabling operation from low to moderate voltages).
- Capable of driving low-impedance loads (e.g., 4–8 ohms) with good efficiency.
- Low quiescent current and good audio performance (low distortion/noise).
- Designed for consumer/auto audio applications with robust protection in a compact package.
Note: exact output-power ratings depend on version and load; consult the datasheet for specific wattage and recommended typical applications.
Pinout
Pin count: 16 pins (DIP-16/SO-16).
Function: Dual audio power amplifier (stereo) IC, typically with two amplifier channels and bridge-tied-load (BTL) or single-ended outputs for consumer audio applications.
Function: Dual audio power amplifier (stereo) IC, typically with two amplifier channels and bridge-tied-load (BTL) or single-ended outputs for consumer audio applications.
Manufacturer
- Manufacturer: NXP Semiconductors (formerly Philips Semiconductors).
- What kind of company: A Dutch multinational that designs and manufactures semiconductor ICs and related electronics components for a wide range of applications.
- What kind of company: A Dutch multinational that designs and manufactures semiconductor ICs and related electronics components for a wide range of applications.
Application
TDA21471 is a dual audio power amplifier IC. Typical application areas:
- Automotive audio systems (car radios/infotainment) to drive stereo speakers
- Home/desktop audio equipment (mini hi‑fi, TV/DVD players, set‑top boxes)
- Multimedia devices (game consoles, Blu‑ray players) requiring high‑fidelity stereo amplification
- Any consumer electronics needing a compact, protected dual amplifier with features like mute/standby and protection for reliable operation
- Automotive audio systems (car radios/infotainment) to drive stereo speakers
- Home/desktop audio equipment (mini hi‑fi, TV/DVD players, set‑top boxes)
- Multimedia devices (game consoles, Blu‑ray players) requiring high‑fidelity stereo amplification
- Any consumer electronics needing a compact, protected dual amplifier with features like mute/standby and protection for reliable operation
Package
TDA21471 comes in an 8-pin package—commonly SO-8 (DIP-8 through-hole variant also available).
