이미지는 참조용입니다.
TLV2381IDBVR
+BOM-
제조업체텍사스 인스트루먼트(주)
-
제조업체 부품 #TLV2381IDBVR
-
재고2141
365 1일 품질 보증
7*24 영업 시간 서비스 보증
90-판매 후 1일 보증
정품 보증
사양
| 속성 | 가치 |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| ProductStatus | Active |
| AmplifierType | General Purpose |
| NumberofCircuits | 1 |
| OutputType | Rail-to-Rail |
| SlewRate | 0.06V/µs |
| GainBandwidthProduct | 160 kHz |
| Current-InputBias | 1 pA |
| Voltage-InputOffset | 500 µV |
| Current-Supply | 7µA |
| Current-Output/Channel | 400 µA |
| Voltage-SupplySpan(Min) | 2.7 V |
| Voltage-SupplySpan(Max) | 16 V |
| OperatingTemperature | -40°C ~ 125°C |
| MountingType | Surface Mount |
| Package/Case | SC-74A, SOT-753 |
개요
Description
The TLV2381IDBVR is a precision operational amplifier (op-amp) from Texas Instruments. It is designed to offer a combination of high-performance characteristics such as low noise, low offset voltage, and low power consumption, making it suitable for a variety of precision applications. It operates over a wide range of supply voltages, typically from 2.7V to 16V, making it versatile for both battery-powered and line-powered applications.
Key features of the TLV2381IDBVR include a rail-to-rail input and output, which maximizes dynamic range in low voltage systems. It also exhibits low input bias current and low input offset voltage, ensuring accurate signal amplification. The amplifier is part of the TLV238x series, noted for its small footprint, often available in an SOT-23 package, making it ideal for space-constrained designs. Its typical applications include sensor signal conditioning, portable electronics, and data acquisition systems where high precision and low power are critical.
Key features of the TLV2381IDBVR include a rail-to-rail input and output, which maximizes dynamic range in low voltage systems. It also exhibits low input bias current and low input offset voltage, ensuring accurate signal amplification. The amplifier is part of the TLV238x series, noted for its small footprint, often available in an SOT-23 package, making it ideal for space-constrained designs. Its typical applications include sensor signal conditioning, portable electronics, and data acquisition systems where high precision and low power are critical.
Equivalent
The TLV2381IDBVR is a low-power operational amplifier. Equivalent products include:
1. LMV321 by Texas Instruments
2. OPA348 by Texas Instruments
3. MCP6001 by Microchip Technology
4. TS321 by STMicroelectronics
5. AD8601 by Analog Devices
These alternatives offer similar low-power, single-channel op-amp functionalities and can serve as substitutes in various applications. Always verify specific performance parameters to ensure compatibility with your project requirements.
1. LMV321 by Texas Instruments
2. OPA348 by Texas Instruments
3. MCP6001 by Microchip Technology
4. TS321 by STMicroelectronics
5. AD8601 by Analog Devices
These alternatives offer similar low-power, single-channel op-amp functionalities and can serve as substitutes in various applications. Always verify specific performance parameters to ensure compatibility with your project requirements.
Features
The TLV2381IDBVR is a precision operational amplifier from Texas Instruments. Key features include:
1. Low Input Offset Voltage: Ensures precision in various applications.
2. High Gain Bandwidth Product: Offers efficient performance in high-speed applications.
3. Low Noise: Reduces signal distortion, making it suitable for sensitive applications.
4. Wide Supply Voltage Range: Typically operates from 2.7V to 8V, allowing flexibility across different systems.
5. Rail-to-Rail Output: Enables maximum dynamic range of output swing.
6. Low Power Consumption: Ideal for battery-powered devices.
7. Surface Mount Package: Available in a compact SOT-23 package, suitable for space-constrained designs.
8. Temperature Range: Operates efficiently across a wide temperature range, enhancing reliability in various environments.
9. CMOS Technology: Provides high input impedance and low power consumption.
These features make the TLV2381IDBVR suitable for a variety of applications requiring precision, low power, and compact design, such as sensor interface, portable equipment, and signal conditioning.
1. Low Input Offset Voltage: Ensures precision in various applications.
2. High Gain Bandwidth Product: Offers efficient performance in high-speed applications.
3. Low Noise: Reduces signal distortion, making it suitable for sensitive applications.
4. Wide Supply Voltage Range: Typically operates from 2.7V to 8V, allowing flexibility across different systems.
5. Rail-to-Rail Output: Enables maximum dynamic range of output swing.
6. Low Power Consumption: Ideal for battery-powered devices.
7. Surface Mount Package: Available in a compact SOT-23 package, suitable for space-constrained designs.
8. Temperature Range: Operates efficiently across a wide temperature range, enhancing reliability in various environments.
9. CMOS Technology: Provides high input impedance and low power consumption.
These features make the TLV2381IDBVR suitable for a variety of applications requiring precision, low power, and compact design, such as sensor interface, portable equipment, and signal conditioning.
Pinout
The TLV2381IDBVR is an operational amplifier from Texas Instruments. It comes in a SOT-23 package, which typically has 5 pins. Here are the pin functions for the TLV2381IDBVR:
1. V+ (Supply Voltage Positive): Connects to the positive supply voltage.
2. Inverting Input (IN- or V–): The input pin for the inverting terminal of the op-amp.
3. Non-Inverting Input (IN+ or V+): The input pin for the non-inverting terminal of the op-amp.
4. V- (Supply Voltage Negative/Ground): Connects to the negative supply voltage or ground.
5. Output: The pin where the amplified signal is output.
This operational amplifier is designed for low-power and precision applications. It is suitable for various applications such as signal conditioning, sensor interfacing, and other analog signal processing tasks.
1. V+ (Supply Voltage Positive): Connects to the positive supply voltage.
2. Inverting Input (IN- or V–): The input pin for the inverting terminal of the op-amp.
3. Non-Inverting Input (IN+ or V+): The input pin for the non-inverting terminal of the op-amp.
4. V- (Supply Voltage Negative/Ground): Connects to the negative supply voltage or ground.
5. Output: The pin where the amplified signal is output.
This operational amplifier is designed for low-power and precision applications. It is suitable for various applications such as signal conditioning, sensor interfacing, and other analog signal processing tasks.
Manufacturer
The TLV2381IDBVR is manufactured by Texas Instruments. Texas Instruments, often abbreviated as TI, is an American technology company renowned for designing and manufacturing semiconductors and various integrated circuits. They are one of the largest producers of analog technology components, embedded processors, and other electronics used in a wide range of applications across multiple industries, including automotive, industrial, electronics, and communications. The company is headquartered in Dallas, Texas, and has a long-standing reputation for innovation in the electronics sector, with a strong focus on research and development to support advancements in technology.
Application
The TLV2381IDBVR is a precision, low-power operational amplifier commonly used in various applications, including:
1. Sensor Signal Conditioning: Amplifying signals from sensors in industrial and consumer applications.
2. Portable Devices: Ideal for battery-operated devices due to its low power consumption.
3. Data Acquisition Systems: Enhancing signal quality in data collection systems.
4. Medical Instrumentation: Utilized in medical devices for accurate signal processing.
5. Audio Equipment: Improving sound quality in audio applications.
6. Test and Measurement: Used in equipment that requires precise measurements.
Its low voltage operation, low noise, and high-performance characteristics make it versatile for precision and low-power designs.
1. Sensor Signal Conditioning: Amplifying signals from sensors in industrial and consumer applications.
2. Portable Devices: Ideal for battery-operated devices due to its low power consumption.
3. Data Acquisition Systems: Enhancing signal quality in data collection systems.
4. Medical Instrumentation: Utilized in medical devices for accurate signal processing.
5. Audio Equipment: Improving sound quality in audio applications.
6. Test and Measurement: Used in equipment that requires precise measurements.
Its low voltage operation, low noise, and high-performance characteristics make it versatile for precision and low-power designs.
Package
The TLV2381IDBVR is packaged in a SOT-23-5 (Small Outline Transistor) configuration. This package type is a small, surface-mount design that contains five pins, typically used for compact and space-constrained electronic circuits.
