사양
| 속성 | 가치 |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Switch Type | General Purpose |
| Number of Outputs | 1 |
| Ratio - Input: Output | 1:1 |
| Output Configuration | High Side |
| Output Type | N-Channel |
| Interface | On/Off |
| Voltage - Load | 6V ~ 18V |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Current - Output (Max) | 22A |
| Rds On (Typ) | 35mOhm |
| Input Type | Non-Inverting |
| Features | Slew Rate Controlled |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Operating Temperature | -40°C ~ 125°C (TA) |
| Mounting Type | Surface Mount |
| Supplier Device Package | 16-HTSSOP |
개요
Description
The TPS1HB35BQPWPRQ1 is a high-side switch from Texas Instruments, designed for automotive applications. It is part of the TPS1HB35 family, which provides robust protection and diagnostic features for driving resistive, capacitive, and inductive loads. This device operates over a wide voltage range and supports a maximum continuous output current, which makes it suitable for controlling various loads such as solenoids, lamps, and motors.
Key features include overcurrent protection, thermal shutdown, and open-load detection, ensuring reliability and safety. It also offers diagnostic feedback through a fault pin, allowing systems to monitor load conditions and device health effectively. The TPS1HB35BQPWPRQ1 is compliant with automotive standards, ensuring it meets the stringent requirements for vehicle applications.
Furthermore, the device is packaged in a small, thermally efficient package, making it ideal for space-constrained environments. Its design facilitates ease of integration into existing automotive systems, providing flexibility and efficiency for automotive engineers seeking reliable electronic switching solutions.
Key features include overcurrent protection, thermal shutdown, and open-load detection, ensuring reliability and safety. It also offers diagnostic feedback through a fault pin, allowing systems to monitor load conditions and device health effectively. The TPS1HB35BQPWPRQ1 is compliant with automotive standards, ensuring it meets the stringent requirements for vehicle applications.
Furthermore, the device is packaged in a small, thermally efficient package, making it ideal for space-constrained environments. Its design facilitates ease of integration into existing automotive systems, providing flexibility and efficiency for automotive engineers seeking reliable electronic switching solutions.
Equivalent
The TPS1HB35BQPWPRQ1 is an automotive high-side switch by Texas Instruments. Equivalent products are usually those that offer similar functionality, voltage, and current ratings, such as:
1. Infineon's BTS50085-1TMA
2. STMicroelectronics' VND5050AK-E
3. NXP's NX5P3390
These components typically provide overcurrent protection, thermal shutdown, and diagnostic feedback like the TPS1HB35BQPWPRQ1. It's important to verify electrical specifications and features to ensure compatibility in the specific application.
1. Infineon's BTS50085-1TMA
2. STMicroelectronics' VND5050AK-E
3. NXP's NX5P3390
These components typically provide overcurrent protection, thermal shutdown, and diagnostic feedback like the TPS1HB35BQPWPRQ1. It's important to verify electrical specifications and features to ensure compatibility in the specific application.
Features
The TPS1HB35BQPWPRQ1 is a smart high-side switch from Texas Instruments, designed for automotive applications. It features a 36V single-channel high-side power switch with integrated protection and diagnosis capabilities. Key features include:
1. Current Capability: Can drive loads up to 35A.
2. Protection Features: Includes overcurrent, overtemperature, and short-circuit protection to ensure robust operation.
3. Diagnostics: Provides fault reporting and load status through digital status feedback.
4. PWM Capability: Supports pulse-width modulation (PWM) for efficient control of loads.
5. Load Dump Protection: Capable of handling transient voltages up to 42V.
6. Low Standby Current: Optimized for low power consumption during standby mode.
7. Automotive-Grade: Qualified for automotive applications, meeting AEC-Q100 standards.
8. Package: Available in a compact PowerSO-16 package, making it suitable for space-constrained applications.
This device is ideal for various automotive applications, including lighting, heating, and motor control, providing efficient and reliable power management.
1. Current Capability: Can drive loads up to 35A.
2. Protection Features: Includes overcurrent, overtemperature, and short-circuit protection to ensure robust operation.
3. Diagnostics: Provides fault reporting and load status through digital status feedback.
4. PWM Capability: Supports pulse-width modulation (PWM) for efficient control of loads.
5. Load Dump Protection: Capable of handling transient voltages up to 42V.
6. Low Standby Current: Optimized for low power consumption during standby mode.
7. Automotive-Grade: Qualified for automotive applications, meeting AEC-Q100 standards.
8. Package: Available in a compact PowerSO-16 package, making it suitable for space-constrained applications.
This device is ideal for various automotive applications, including lighting, heating, and motor control, providing efficient and reliable power management.
Pinout
The TPS1HB35BQPWPRQ1 is a single-channel Smart High-Side Switch from Texas Instruments, designed for automotive applications. It comes in a PowerPAD™ HTSSOP package and has a pin count of 14.
The primary function of the TPS1HB35BQPWPRQ1 is to control and protect the power distribution to various automotive loads, such as lamps, solenoids, and heaters. Key features include protection against overcurrent, overtemperature, short-to-ground, and short-to-battery conditions. The device also offers diagnostics and fault detection through its status feedback pin, allowing for real-time monitoring of the load conditions.
Overall, the TPS1HB35BQPWPRQ1 is engineered to enhance reliability and performance in automotive power systems, providing robust protection and control in a compact form factor.
The primary function of the TPS1HB35BQPWPRQ1 is to control and protect the power distribution to various automotive loads, such as lamps, solenoids, and heaters. Key features include protection against overcurrent, overtemperature, short-to-ground, and short-to-battery conditions. The device also offers diagnostics and fault detection through its status feedback pin, allowing for real-time monitoring of the load conditions.
Overall, the TPS1HB35BQPWPRQ1 is engineered to enhance reliability and performance in automotive power systems, providing robust protection and control in a compact form factor.
Manufacturer
The TPS1HB35BQPWPRQ1 is manufactured by Texas Instruments (TI). Texas Instruments is a multinational technology company that designs and produces semiconductors and various integrated circuits, which are used in electronic devices across numerous industries. It is one of the largest semiconductor companies in the world and specializes in analog chips and embedded processors. TI's products are used in applications like automotive, industrial, personal electronics, and communications equipment. The company is headquartered in Dallas, Texas, and is known for its innovation in the semiconductor industry.
Application
The TPS1HB35BQPWPRQ1 is a high-side switch designed for automotive applications. Its primary application areas include:
1. Automotive Lighting: Controls LED and incandescent lighting systems.
2. Power Distribution: Manages power to various vehicular systems, ensuring efficient distribution.
3. Heater Control: Operates heating elements within vehicles, such as seat heaters.
4. Motor Drive: Suitable for driving small motors in automotive settings.
5. Body Control Modules: Integrates with systems that manage vehicle body electronics.
These applications benefit from the device's protection features, such as overcurrent, overtemperature, and short-to-battery protection, enhancing reliability and safety in automotive environments.
1. Automotive Lighting: Controls LED and incandescent lighting systems.
2. Power Distribution: Manages power to various vehicular systems, ensuring efficient distribution.
3. Heater Control: Operates heating elements within vehicles, such as seat heaters.
4. Motor Drive: Suitable for driving small motors in automotive settings.
5. Body Control Modules: Integrates with systems that manage vehicle body electronics.
These applications benefit from the device's protection features, such as overcurrent, overtemperature, and short-to-battery protection, enhancing reliability and safety in automotive environments.
Package
The TPS1HB35BQPWPRQ1 is housed in a PowerSO-16 package. This package is known for its compact design suitable for high-power applications, offering good thermal performance and reliability for automotive and industrial uses.
