이미지는 참조용입니다.
TPS76618DR
+BOMIC REG LINEAR 1.8V 250MA 8-SOIC
-
제조업체텍사스 인스트루먼트(주)
-
제조업체 부품 #TPS76618DR
-
재고6046
365 1일 품질 보증
7*24 영업 시간 서비스 보증
90-판매 후 1일 보증
정품 보증
사양
| 속성 | 가치 |
| Part Status | Active |
| Base Product Number | TPS76618 |
| Output Configuration | Positive |
| Output Type | Fixed |
| Number of Regulators | 1 |
| Voltage - Input (Max) | 10V |
| Voltage - Output (Min/Fixed) | 1.8V |
| Current - Output | 250mA |
| Current - Quiescent (Iq) | 50 µA |
| PSRR | 63dB (1kHz) |
| Control Features | Enable, Power Good |
| Protection Features | Over Current, Over Temperature, Reverse Polarity |
| Operating Temperature | -40°C ~ 125°C |
| Mounting Type | Surface Mount |
| Package | 8-SOIC (0.154", 3.90mm Width) |
| Supplier Device Package | 8-SOIC |
| Packaging | Cut Tape (CT), Tape & Reel (TR) |
개요
Description
Introduction to TPS76618DR:
The TPS76618DR is a fixed-output low-dropout regulator (LDO) from Texas Instruments, part of the TPS766 family. It provides a stable 1.8 V rail from a higher input voltage and is intended for powering 1.8 V digital logic in portable and embedded designs.
Key features (high level):
- Fixed 1.8 V output
- Low quiescent current (long battery life)
- Low dropout for operation with modest headroom
- Built-in protection: current limit and thermal shutdown
- Enable (EN) pin to disable the regulator for power saving
- Compact packaging suitable for compact PCB designs
Typical applications:
- Microcontrollers, memory, and sensors that run at 1.8 V
- Wearables, IoT devices, and other battery-powered electronics
Note: For exact electrical specs, recommended operating conditions, and packaging options, see the TI TPS76618DR datasheet and product page.
The TPS76618DR is a fixed-output low-dropout regulator (LDO) from Texas Instruments, part of the TPS766 family. It provides a stable 1.8 V rail from a higher input voltage and is intended for powering 1.8 V digital logic in portable and embedded designs.
Key features (high level):
- Fixed 1.8 V output
- Low quiescent current (long battery life)
- Low dropout for operation with modest headroom
- Built-in protection: current limit and thermal shutdown
- Enable (EN) pin to disable the regulator for power saving
- Compact packaging suitable for compact PCB designs
Typical applications:
- Microcontrollers, memory, and sensors that run at 1.8 V
- Wearables, IoT devices, and other battery-powered electronics
Note: For exact electrical specs, recommended operating conditions, and packaging options, see the TI TPS76618DR datasheet and product page.
Equivalent
TPS76618DR is a 1.8 V fixed-output LDO regulator (~150 mA). Common equivalents (drop-in or similar specs) include:
- TI TLV70018
- Microchip MCP1700-1802
- Microchip MIC5205-1.8
- ST LD3985-1.8
- Onsemi NCP4681-1.8
- AMS1117-1.8 (vendor variants)
Note: verify dropout, quiescent current, and package cross-reference for exact compatibility.
- TI TLV70018
- Microchip MCP1700-1802
- Microchip MIC5205-1.8
- ST LD3985-1.8
- Onsemi NCP4681-1.8
- AMS1117-1.8 (vendor variants)
Note: verify dropout, quiescent current, and package cross-reference for exact compatibility.
Features
TPS76618DR features (high level):
- Fixed 1.8 V output low-dropout regulator (LDO)
- Ultra-low quiescent current (battery-friendly)
- Very low dropout voltage for high efficiency at low input-output differentials
- Enable (EN) pin to shutdown/regulate enable
- Overcurrent protection and thermal shutdown
- Short-circuit protection
- Stable with standard ceramic output capacitors (low ESR required)
- Low-noise design with good PSRR
- Small package with DR (Tape-and-Reel) option for automated assembly
Applications: portable/battery-powered devices, microcontrollers, and other low-voltage analog/digital circuits.
- Fixed 1.8 V output low-dropout regulator (LDO)
- Ultra-low quiescent current (battery-friendly)
- Very low dropout voltage for high efficiency at low input-output differentials
- Enable (EN) pin to shutdown/regulate enable
- Overcurrent protection and thermal shutdown
- Short-circuit protection
- Stable with standard ceramic output capacitors (low ESR required)
- Low-noise design with good PSRR
- Small package with DR (Tape-and-Reel) option for automated assembly
Applications: portable/battery-powered devices, microcontrollers, and other low-voltage analog/digital circuits.
Pinout
- Pin count: 5 pins (SOT-23-5 / SC-70-5 package, TPS76618DR).
- Function: Fixed 1.8-V low-dropout regulator (LDO) with an enable input, supplying up to about 150 mA from a higher input voltage.
- Function: Fixed 1.8-V low-dropout regulator (LDO) with an enable input, supplying up to about 150 mA from a higher input voltage.
Manufacturer
- Manufacturer: Texas Instruments (TI).
- About the company: Texas Instruments is an American multinational semiconductor company that designs and manufactures semiconductors and integrated circuits for electronics.
- About the company: Texas Instruments is an American multinational semiconductor company that designs and manufactures semiconductors and integrated circuits for electronics.
Application
TPS76618DR is a 1.8-V fixed-output LDO ideal for low-power, battery-powered rails. Typical applications:
- Battery-powered devices and wearables, IoT sensors, handheld meters needing a 1.8-V supply with ultra-low quiescent current
- Microcontroller/processor core and memory rails in embedded systems
- RF/front-end modules (Bluetooth, Zigbee, sub-GHz, GPS) needing clean 1.8-V power
- Sensor, image sensor, and camera subsystems
- Auxiliary power rails in automotive and industrial electronics
- Battery-powered devices and wearables, IoT sensors, handheld meters needing a 1.8-V supply with ultra-low quiescent current
- Microcontroller/processor core and memory rails in embedded systems
- RF/front-end modules (Bluetooth, Zigbee, sub-GHz, GPS) needing clean 1.8-V power
- Sensor, image sensor, and camera subsystems
- Auxiliary power rails in automotive and industrial electronics
Package
TPS76618DR comes in an 8-pin VSSOP (Very Small Outline Package).
