이미지는 참조용입니다.
W25Q128BVEIG
+BOMIC FLASH 128MBIT SPI/QUAD 8WSON
-
제조업체화방전자
-
제조업체 부품 #W25Q128BVEIG
-
데이터시트 W25Q128BVEIG DataSheet
-
재고7562
365 1일 품질 보증
7*24 영업 시간 서비스 보증
90-판매 후 1일 보증
정품 보증
사양
| 속성 | 가치 |
| Series | SpiFlash® |
| Part Status | Obsolete |
| Base Product Number | W25Q128 |
| DigiKey Programmable | Not Verified |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NOR |
| Memory Size | 128Mbit |
| Memory Organization | 16M x 8 |
| Memory Interface | SPI - Quad I/O |
| Clock Frequency | 104 MHz |
| Write Cycle Time - Word, Page | 50µs, 3ms |
| Voltage - Supply | 2.7V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
| Package | 8-WDFN Exposed Pad |
| Supplier Device Package | 8-WSON (8x6) |
| Packaging | Tube |
개요
Description
Key features:
- Capacity: 128 Mbit (16 MB)
- Interface: SPI-compatible with standard SPI and dual/quad I/O modes for higher throughput
- Voltage: 2.7–3.6 V (typical 3.3 V)
- Speed: up to ~104 MHz in standard SPI; higher throughput in dual/quad I/O
- Organization: 256-byte pages; 4 KB sectors; 64 KB blocks
- Operations: Read, Page Program (256 bytes), Sector/Block Erase, Chip Erase; Write Enable/Protect and status/lock features
- Endurance/retention: ~100k P/E cycles; data retention ~20 years
- Packaging/Temp: 8-pin lead-free package; industrial temperature range (-40 to 85°C)
Applications:
Firmware storage and boot memory, code caches, data logging, and other embedded/consumer or automotive electronics.
Equivalent
- Macronix MX25L12845GMI-10G
- Gigadevice GD25Q128CIG
- Spansion/Cypress S25FL128S (or S25FL128P)
- ISSI IS25LP128M
Note: verify timing, voltage, addressing mode, and package variant for true drop-in replacement.
Features
- Capacity: 128 Mbit (16 MByte) serial flash memory.
- Interface: SPI-compatible; supports standard SPI, Dual I/O, and Quad I/O fast read.
- Speed: Fast read up to about 104 MHz (SPI); supports Quad/DIO reads for higher throughput.
- Memory organization: 256-byte page size; 4 KB sectors; 32 KB/64 KB blocks; chip erase available.
- Voltage and temp: 2.7–3.6 V operation; typically -40 °C to 85 °C (industrial grade).
- Power: Deep Power-Down mode; low-power standby.
- Endurance/Retention: ~100k write/erase cycles per sector; data retention ~20 years.
- Security: Block protection (BP) bits, Write Protect (WP#) and standard security features.
- Commands: Page Program, sector/block/chip erase, write enable/disable, read/status register, etc.
- Packaging: 8-pin package (standard Winbond form factor).
Note: exact voltage/temperature specs and available modes can vary by revision/packing; consult the latest datasheet for details.
Pinout
Manufacturer
- What kind of company: A Taiwan-based semiconductor company that designs and manufactures memory ICs (notably serial NOR flash and DRAM) for embedded and consumer electronics; publicly traded on the Taiwan Stock Exchange.
Application
- Embedded systems for firmware storage and code execution
- Bootloader/BIOS storage in MCU-based devices
- Consumer electronics (set-top boxes, cameras, audio players)
- Networking equipment (routers, switches, modems) for firmware and configuration data
- Automotive and industrial controllers needing reliable non-volatile storage
- Data logging and parameter storage (calibration data, sensor logs)
- In-field firmware updates (OTA/USB)
Package
Frequently Asked Questions
Q: What is the maximum clock frequency for this W25Q128BVEIG SPI Flash?
A: It supports a maximum clock frequency of 104 MHz, enabling fast data transfer for high-performance applications.
Q: Does this device support Dual/Quad SPI interface?
A: Yes, it features a SPI - Quad I/O interface, allowing for higher throughput through multiplexed I/O lines.
Q: What is the typical page program time for this memory?
A: The write cycle time is 50µs per word and 3ms per page, ensuring efficient programming operations.
Q: What is the voltage supply range for the W25Q128BVEIG?
A: It operates within a voltage range of 2.7V to 3.6V, making it compatible with standard 3.3V logic systems.
Q: What is the memory organization of this component?
A: It is organized as 16M x 8 bits, providing a total memory density of 128Mbit in a byte-accessible format.
Q: Is this part suitable for surface mount assembly?
A: Yes, it comes in an 8-WDFN exposed pad surface mount package, with a 8-WSON (8x6) footprint for thermal management.
Q: What operating temperature range does this Flash memory support?
A: It operates from -40°C to 85°C (TA), making it reliable for industrial temperature environments.
