74HCT08D
도시바 반도체 및 스토리지
- Lifecycle
- Active
- Stock
- 6154 PCS
- Package
- SOIC-14
- Series
- 로직 - 도어 및 인버터
74HCT08D과 74HCT240D,653에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The 74HCT08D and 74HCT240D,653 are not functionally interchangeable despite sharing the same 74HCT logic family and SO14 package. The 74HCT08D provides four independent 2-input AND gates with active-high push-pull outputs, whereas the 74HCT240D,653 is an octal buffer/line driver with 3-state inverting outputs and dual active-low output enable pins. The differences in logic function, channel count, output type, and control interface make direct substitution impossible without redesigning the surrounding circuit.
도시바 반도체 및 스토리지
은지포 반도체
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | 74HCT08D | 74HCT240D,653 | Why it matters |
|---|---|---|---|
| Logic Function | Quad 2-input AND gate | Octal 3-state inverting buffer/line driver | The logic function determines the fundamental operation performed; these devices are not functionally interchangeable. |
| Number of Gates / Channels | 4 | 8 | Channel count affects how many independent signals can be processed per package. |
| Output Type | Push-pull (totem-pole) | 3-state (tri-state) | 3-state outputs allow bus sharing and high-impedance disconnection, which push-pull outputs cannot provide. |
| Output Polarity | Non-inverting | Inverting | Polarity determines whether the output logic level matches or is inverted relative to the input. |
| Number of Inputs per Channel | 2 | 1 | AND gates require two inputs per channel, whereas buffers have a single input per channel. |
| Propagation Delay (typical) | ~11 ns at 4.5 V | ~12 ns at 4.5 V | Propagation delay affects timing margins in synchronous and high-speed digital circuits. |
| Output Drive Current (IOH/IOL) | ±4 mA | ±6 mA | Drive current determines the ability to drive loads such as LEDs, other logic inputs, or transmission lines. |
| Package | SO14 (14-pin SOIC) | SO20 (20-pin SOIC) | Package footprint and pin count must match the PCB layout for physical compatibility. |
| Pin Count | 14 | 20 | Pin count affects board layout, routing, and mechanical fit. |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | Both devices operate from the same standard 5 V HCT logic supply range. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | 74HCT08D | 74HCT240D,653 |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Series | 74HCT | Bulk |
| Logic Type | AND Gate | Active |
| Part Status | Obsolete | - |
| Number of Circuits | 4 | - |
| Number of Inputs | 2 | - |
| Voltage - Supply | 4.5V ~ 5.5V | - |
| Current - Quiescent (Max) | 1 µA | - |
| Current - Output High Low | 4mA, 4mA | - |
| Logic Level - Low | 0.8V | - |
| Logic Level - High | 2V | - |
| Max Propagation Delay @ V Max CL | 18ns @ 5.5V, 50pF | - |
| Operating Temperature | -40°C ~ 85°C | - |
| Mounting Type | Surface Mount | - |
The 74HCT08D contains four independent 2-input AND gates, while the 74HCT240D,653 contains eight independent 3-state inverting buffers arranged as two 4-bit groups. The 74HCT08D performs logical AND operations, whereas the 74HCT240D,653 is designed for bus driving and signal buffering with high-impedance output capability.
No. The 74HCT08D is typically supplied in a 14-pin SOIC package, while the 74HCT240D,653 is supplied in a 20-pin SOIC package. They have different pin counts, pin assignments, and PCB land patterns, so they are not drop-in replacements for each other.
Yes. Both devices are members of the 74HCT logic family and are specified for a nominal supply voltage of 5 V, with a recommended operating range typically from 4.5 V to 5.5 V. However, always confirm the exact limits in the respective manufacturer datasheet.
Yes. The 74HCT240D,653 features 3-state outputs that can be placed in a high-impedance state via two active-low output enable pins, making it suitable for bus-oriented systems. The 74HCT08D has standard totem-pole outputs without 3-state capability.
Both devices are HCT-family parts and typically exhibit propagation delays in the range of approximately 10 ns to 20 ns at 5 V, depending on load conditions and the specific manufacturer. For guaranteed limits, refer to the timing specifications in the official datasheet for each part number.
No. The 74HCT240D,653 is specifically designed for bus driving with 3-state outputs and higher output drive current, while the 74HCT08D provides AND gate logic with standard output drive. Substituting one for the other would change both the logic function and the bus interface behavior.
The 74HCT08D implements four independent 2-input AND gates, where the output is HIGH only when both inputs are HIGH. The 74HCT240D,653 implements eight inverting buffers with 3-state outputs, where each output is the logical inverse of its input when enabled.
Both the 74HCT08D and 74HCT240D,653 are typically specified for the industrial temperature range of -40 °C to +125 °C or -40 °C to +85 °C, depending on the manufacturer and package variant. Verify the exact range in the specific manufacturer datasheet before use in extreme environments.