74HCT08D vs 74HCT245D,653

74HCT08D과 74HCT245D,653에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The 74HCT08D and 74HCT245D,653 are not functionally interchangeable despite sharing the same 74HCT logic family and SOIC package. The 74HCT08D is a quad 2-input AND gate with four independent logic gates, while the 74HCT245D,653 is an octal bus transceiver with 3-state outputs and directional control. Their internal logic functions, pin configurations, channel counts, and output drive characteristics are fundamentally different, making direct substitution impossible without complete circuit redesign.

Different logic function Different channel count Different pinout Different output type

Parts at a glance

Part A

74HCT08D

도시바 반도체 및 스토리지

Lifecycle
Active
Stock
6154 PCS
Package
SOIC-14
Series
로직 - 도어 및 인버터
Part B

74HCT245D,653

은지포미국주식회사

Lifecycle
Active
Stock
5860 PCS
Package
SOIC-20
Series
논리 - 버퍼, 드라이브, 수신기, 트랜시버

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter 74HCT08D 74HCT245D,653 Why it matters
Logic Function Quad 2-input AND gate Octal bus transceiver with 3-state outputs Defines the fundamental logic operation; the two devices perform completely different functions and are not functionally interchangeable.
Number of Channels 4 8 Determines how many independent signal paths can be processed simultaneously.
Output Type Push-pull (totem-pole) 3-state (tri-state) 3-state outputs allow bus sharing and high-impedance disconnection, while push-pull outputs cannot be tied together on a shared bus.
Direction Control None (unidirectional) Direction pin (DIR) for A-to-B or B-to-A Bidirectional control enables the transceiver to route data in either direction, which the AND gate cannot do.
Output Enable Not applicable Active-low output enable (OE) Output enable allows the device to be placed in high-impedance state for bus arbitration and multiplexing.
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V Both are HCT-family devices designed for 5 V TTL-compatible systems, so supply compatibility is identical.
Logic Family HCT (High-speed CMOS, TTL compatible) HCT (High-speed CMOS, TTL compatible) Same logic family ensures compatible input thresholds and output drive characteristics.
Propagation Delay (typical) Approximately 9 ns at 5 V Approximately 12 ns at 5 V Affects maximum operating speed and timing margins in synchronous designs.
Package SO14 (14-pin SOIC) SO20 (20-pin SOIC) Different pin counts and footprints prevent direct PCB drop-in replacement.
Pin Count 14 20 Pin count determines board layout, routing, and mechanical compatibility.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification 74HCT08D 74HCT245D,653
Supplier - Rochester Electronics, LLC
Series 74HCT 74HCT
Part Status Obsolete Active
Logic Type AND Gate Transceiver, Non-Inverting
Number of Elements - 1
Number of Bits per Element - 8
Output Type - 3-State
Current - Output High Low 4mA, 4mA 6mA, 6mA
Voltage - Supply 4.5V ~ 5.5V 4.5V ~ 5.5V
Operating Temperature -40°C ~ 85°C -40°C ~ 125°C (TA)
Mounting Type Surface Mount Surface Mount
Number of Circuits 4 -
Number of Inputs 2 -
Current - Quiescent (Max) 1 µA -
Logic Level - Low 0.8V -
Logic Level - High 2V -
Max Propagation Delay @ V Max CL 18ns @ 5.5V, 50pF -

Frequently asked questions

What are the primary functional differences between the 74HCT08D and the 74HCT245D,653?

The 74HCT08D contains four independent 2-input AND gates, while the 74HCT245D,653 is an octal bus transceiver with 3-state outputs. The 74HCT08D performs fixed logic AND operations, whereas the 74HCT245D,653 provides bidirectional data transfer between two buses with direction and output-enable control.

Are the 74HCT08D and 74HCT245D,653 pin-compatible?

No. The 74HCT08D is a 14-pin SOIC device with four 2-input AND gates, while the 74HCT245D,653 is a 20-pin SOIC device with eight transceiver channels plus direction and output-enable pins. Their pin counts, pin functions, and PCB land patterns differ, so they are not drop-in replacements.

Can the 74HCT08D and 74HCT245D,653 operate from the same supply voltage?

Yes. Both devices are HCT-family logic parts specified for a 4.5 V to 5.5 V supply, with 5 V being the nominal operating voltage. They are not intended for 3.3 V-only logic systems without level-shifting considerations.

What is the difference in output drive capability between the 74HCT08D and the 74HCT245D,653?

Both devices are specified with standard HCT-family output drive of ±4 mA at 5 V. The 74HCT245D,653 adds 3-state outputs and bus-oriented drive characteristics, but its per-channel DC output current rating is in the same standard logic range as the 74HCT08D.

Does the 74HCT245D,653 provide isolation that the 74HCT08D does not?

Yes. The 74HCT245D,653 has 3-state outputs controlled by an output-enable pin, allowing its bus outputs to be placed in a high-impedance state for bus isolation. The 74HCT08D has standard totem-pole outputs and does not provide a high-impedance disable state.

Which device is suitable for bidirectional bus interfacing?

The 74HCT245D,653 is the appropriate choice for bidirectional bus interfacing because it is an octal bus transceiver with direction control and 3-state outputs. The 74HCT08D is a fixed-function AND gate array and cannot perform bidirectional data transfer.

Are the 74HCT08D and 74HCT245D,653 interchangeable in an existing design?

No. They differ in logic function, pin count, package footprint, and control features. Substitution would require redesigning the circuit to match the transceiver function, pinout, and 3-state control of the 74HCT245D,653 or the AND-gate function and 14-pin pinout of the 74HCT08D.

Do both devices support the same operating temperature range?

Both the 74HCT08D and the 74HCT245D,653 are typically specified for the standard industrial temperature range of -40 °C to +125 °C or -40 °C to +85 °C depending on the exact manufacturer suffix and datasheet. The specific temperature grade must be verified from the ordering code and manufacturer datasheet for each part.