74HCT540D
도시바 반도체 및 스토리지
- Lifecycle
- Active
- Stock
- 1645 PCS
- Package
- SOIC-14
- Series
- 논리 - 버퍼, 드라이브, 수신기, 트랜시버
74HCT540D과 74HCT125D-Q100J에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The 74HCT540D and 74HCT125D-Q100J are not functionally interchangeable. The 74HCT540D is an octal inverting buffer with 3-state outputs, while the 74HCT125D-Q100J is a quad non-inverting buffer with 3-state outputs. They differ in logic function, channel count, package footprint, and pinout, so direct substitution is not possible without circuit redesign.
도시바 반도체 및 스토리지
넥스페리아 USA 주식회사
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | 74HCT540D | 74HCT125D-Q100J | Why it matters |
|---|---|---|---|
| Logic Function | Octal buffer/line driver with 3-state outputs, inverting | Quad buffer/line driver with 3-state outputs, non-inverting | The logic function determines signal polarity and channel count, directly affecting circuit behavior and pin compatibility. |
| Number of Channels | 8 | 4 | Channel count determines how many independent signal lines can be buffered, affecting board layout and device count. |
| Output Type | 3-state, inverting | 3-state, non-inverting | Output polarity must match the intended logic to avoid signal inversion errors in the target design. |
| Control Inputs | Two active-low output enable pins (OE1, OE2) | Four active-low output enable pins (one per channel) | Enable pin configuration affects how outputs are gated and whether channels can be controlled independently. |
| Package | SO20 (20-pin SOIC) | SO14 (14-pin SOIC) | Package footprint and pin count must match the PCB layout for physical substitutability. |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | Both devices operate in the standard 5 V TTL-compatible range, ensuring supply compatibility. |
| Logic Family | HCT (High-speed CMOS, TTL-compatible) | HCT (High-speed CMOS, TTL-compatible) | Same logic family ensures compatible input thresholds and output drive characteristics. |
| Qualification | Standard commercial/industrial | AEC-Q100 qualified (automotive grade) | Automotive qualification indicates enhanced reliability and temperature range for harsh environments. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C (AEC-Q100 Grade 1) | Temperature range affects suitability for automotive and industrial applications. |
| Propagation Delay (typical) | ~12 ns at 5 V | ~12 ns at 5 V | Propagation delay impacts timing margins in high-speed digital circuits. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | 74HCT540D | 74HCT125D-Q100J |
|---|---|---|
| Supplier | - | Nexperia USA Inc. |
| Series | 74HCT | Automotive, AEC-Q100, 74HCT |
| Part Status | Active | Active |
| Logic Type | Buffer, Inverting | Buffer, Non-Inverting |
| Number of Elements | 1 | 4 |
| Number of Bits per Element | 8 | 1 |
| Output Type | 3-State | 3-State |
| Current - Output High Low | 6mA, 6mA | 6mA, 6mA |
| Voltage - Supply | 4.5V ~ 5.5V | 4.5V ~ 5.5V |
| Operating Temperature | -40°C ~ 85°C (TA) | -40°C ~ 125°C (TA) |
| Mounting Type | Surface Mount | Surface Mount |
The 74HCT540D is an octal inverting buffer/line driver with 3-state outputs, featuring two active-low output enable pins that control four outputs each. The 74HCT125D-Q100J is a quad non-inverting buffer/line driver with 3-state outputs, where each of the four buffers has its own independent active-low output enable pin. The 74HCT540D provides eight inverting channels, while the 74HCT125D-Q100J provides four non-inverting channels.
No. The 74HCT540D is typically supplied in a 20-pin package (SO20 or TSSOP20), while the 74HCT125D-Q100J is supplied in a 14-pin package (SO14). They have different pin counts, pin assignments, and package footprints, so they are not pin-compatible and cannot be used as drop-in replacements for each other.
The 74HCT540D provides inverting outputs, meaning the output logic level is the inverse of the input. The 74HCT125D-Q100J provides non-inverting outputs, meaning the output logic level follows the input. This polarity difference is critical when selecting a replacement for signal path integrity.
Yes. Both the 74HCT540D and the 74HCT125D-Q100J are HCT-family CMOS logic devices designed to operate from a nominal 5 V supply, with a specified operating supply voltage range typically from 4.5 V to 5.5 V. They are also TTL-voltage compatible at their inputs.
The 74HCT540D has two active-low output enable pins (OE1 and OE2), each controlling a group of four outputs. The 74HCT125D-Q100J has four independent active-low output enable pins (1OE through 4OE), one for each of its four buffers. This gives the 74HCT125D-Q100J more granular control over individual channels.
The 74HCT125D-Q100J carries the Q100 suffix, which indicates it is qualified to the AEC-Q100 standard for automotive-grade integrated circuits. The 74HCT540D, as a standard logic part without the Q100 designation, is not automatically AEC-Q100 qualified. Designers requiring automotive qualification should verify the specific ordering code and qualification status of each device.
Both devices are standard HCT-family logic buffers with similar output drive characteristics, typically specified with a symmetric output drive of ±4 mA or ±6 mA depending on the manufacturer and test conditions. Neither device is intended as a high-current driver. For specific drive current ratings, consult the respective manufacturer datasheet, as values may vary slightly between suppliers.
Neither device is inherently a bidirectional transceiver. The 74HCT540D is an octal buffer with 3-state outputs suitable for unidirectional bus driving with enable control. The 74HCT125D-Q100J is a quad buffer with independent 3-state outputs, also unidirectional per channel. For true bidirectional bus applications, a dedicated transceiver such as the 74HCT245 would be more appropriate.