Part A
74HCT14D
도시바 반도체 및 스토리지
- Lifecycle
- Active
- Stock
- 6342 PCS
- Package
- SOIC-14
- Series
- 로직 - 도어 및 인버터
Replacement verdict
Not a drop-in replacement
The 74HCT540D and 74HCT14D are not functionally interchangeable. The 74HCT540D is an octal inverting 3-state buffer with dual active-low output enables, while the 74HCT14D is a hex inverting Schmitt-trigger device with hysteresis. They differ in logic function, channel count, output drive configuration, and input threshold behavior, so direct substitution is not possible without circuit redesign.
Different logic function
Different channel count
Different output type
Different input threshold
Parts at a glance
Part B
74HCT540D
도시바 반도체 및 스토리지
- Lifecycle
- Active
- Stock
- 1645 PCS
- Package
- SOIC-14
- Series
- 논리 - 버퍼, 드라이브, 수신기, 트랜시버
Key differences
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | 74HCT540D | 74HCT14D | Why it matters |
|---|---|---|---|
| Logic Function | Octal inverting buffer/line driver with 3-state outputs | Hex inverting Schmitt trigger | Defines the core function; these devices are not functionally interchangeable as they perform different logic operations. |
| Number of Channels | 8 | 6 | Channel count determines how many independent signal lines can be processed, affecting circuit design and board layout. |
| Output Type | 3-state (tri-state) | Push-pull | 3-state outputs allow bus sharing and high-impedance disconnection, while push-pull outputs cannot be tied together. |
| Input Type | Standard CMOS/TTL-compatible | Schmitt trigger | Schmitt trigger inputs provide hysteresis for noise immunity and slow signal conditioning, which standard inputs lack. |
| Propagation Delay (typical) | ~12 ns at 5 V | ~19 ns at 5 V | Affects maximum operating frequency and timing margins in synchronous or high-speed designs. |
| Output Drive Current | ±6 mA | ±4 mA | Determines the ability to drive loads such as LEDs, long traces, or multiple gate inputs. |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | Both operate in the standard 5 V TTL-compatible range, ensuring compatibility with common logic supplies. |
| Package | SO14 (SOIC-14) | SO14 (SOIC-14) | Same package footprint allows identical PCB placement, though pinouts and functions differ. |
| Pin Count | 20 | 14 | Different pin counts mean incompatible footprints and require different PCB layouts. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | Both support industrial temperature ranges, suitable for harsh environments. |
Need help validating a replacement?
Send your BOM and application constraints for technical and sourcing review.
Full specification comparison
Use manufacturer datasheets as the final authority.
| Specification | 74HCT14D | 74HCT540D |
|---|---|---|
| Series | 74HCT | 74HCT |
| Part Status | Active | Active |
| Logic Type | Inverter | Buffer, Inverting |
| Number of Circuits | 6 | - |
| Number of Inputs | 1 | - |
| Features | Schmitt Trigger | - |
| Voltage - Supply | 4.5V ~ 5.5V | 4.5V ~ 5.5V |
| Current - Quiescent (Max) | 1 µA | - |
| Current - Output High Low | 4mA, 4mA | 6mA, 6mA |
| Max Propagation Delay @ V Max CL | 31ns @ 5.5V, 50pF | - |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Elements | - | 1 |
| Number of Bits per Element | - | 8 |
| Output Type | - | 3-State |
Frequently asked questions
What are the primary functional differences between the 74HCT540D and the 74HCT14D?
The 74HCT540D is an octal inverting buffer/line driver with 3-state outputs, designed for bus-oriented applications. The 74HCT14D is a hex inverting Schmitt trigger, used for signal conditioning and noise rejection on slow or noisy input signals. They serve different logic functions and are not pin-to-pin or function-to-function equivalents.
Can the 74HCT540D and 74HCT14D be used interchangeably in a design?
No. The 74HCT540D provides eight inverting buffers with 3-state outputs and two active-low output enable pins, while the 74HCT14D provides six inverting Schmitt trigger inputs with standard push-pull outputs and no enable pins. Their pinouts, logic functions, and output structures differ, so direct substitution is not possible without redesign.
Do the 74HCT540D and 74HCT14D have the same package and pinout?
Both devices are commonly offered in a 14-pin SOIC package (the D suffix typically denotes SOIC). However, their pinouts are different. The 74HCT540D uses the 14 pins for eight inputs, eight outputs, two output enable pins, and power/ground, while the 74HCT14D uses the 14 pins for six inputs, six outputs, and power/ground. They are not pin-compatible.
What are the typical supply voltage and logic family characteristics of these devices?
Both are HCT-family devices, which means they operate with a nominal 5 V supply and are TTL-voltage compatible on their inputs. The 74HCT540D and 74HCT14D both typically support a supply voltage range of 4.5 V to 5.5 V, with standard HCT input thresholds and output drive characteristics as specified in their respective manufacturer datasheets.
Which device is better suited for cleaning up noisy or slow digital signals?
The 74HCT14D is better suited for signal conditioning because it contains Schmitt trigger inputs with defined hysteresis, which helps reject noise and square up slow edges. The 74HCT540D has standard input thresholds and is intended for buffering and driving bus lines, not for Schmitt trigger signal conditioning.
Which device is better suited for driving a shared data bus?
The 74HCT540D is better suited for bus driving because it has 3-state outputs and output enable controls, allowing multiple devices to share a common bus without contention. The 74HCT14D has standard push-pull outputs and no 3-state capability, so it is not intended for direct bus multiplexing.
Are the output drive capabilities of the 74HCT540D and 74HCT14D the same?
No. The 74HCT540D is specified as a line driver with higher output drive current suitable for bus and transmission-line environments. The 74HCT14D has standard HCT output drive intended for general logic interfacing. Exact drive currents should be verified from the specific manufacturer datasheet for each part.
Can the 74HCT14D replace the 74HCT540D if only inversion is needed?
No, not directly. Even if only inversion is required, the 74HCT540D provides eight inverting channels with 3-state outputs and enable controls, while the 74HCT14D provides six inverting Schmitt trigger channels with push-pull outputs. The channel count, pinout, output type, and input characteristics differ, so a replacement would require circuit and layout changes.