74HCT08D
도시바 반도체 및 스토리지
- Lifecycle
- Active
- Stock
- 6154 PCS
- Package
- SOIC-14
- Series
- 로직 - 도어 및 인버터
74HCT08D과 74HCT14D에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The 74HCT14D and 74HCT08D are not functionally interchangeable despite sharing the same 74HCT logic family, SO-14 package, and supply voltage range. The 74HCT14D is a hex inverting Schmitt-trigger device with hysteresis, while the 74HCT08D is a quad 2-input AND gate with standard CMOS input thresholds. Their differing logic functions, channel counts, input characteristics, and output drive capabilities make direct substitution impossible without circuit redesign.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | 74HCT14D | 74HCT08D | Why it matters |
|---|---|---|---|
| Logic Function | Hex inverting Schmitt trigger | Quad 2-input AND gate | Defines the fundamental logic operation; the two devices are not functionally interchangeable. |
| Number of Gates/Channels | 6 | 4 | Determines how many independent signal paths are available in a single package. |
| Number of Inputs per Gate | 1 | 2 | Affects the logic capability and pin usage of each gate in the circuit. |
| Input Type | Schmitt trigger | Standard CMOS/TTL-compatible | Schmitt trigger inputs provide hysteresis for noise immunity and slow signal edges, which standard inputs lack. |
| Output Type | Inverting | Non-inverting | Determines the polarity of the output relative to the input signal. |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | Defines the operating voltage window; both are 5 V TTL-compatible HCT devices. |
| Logic Family | HCT | HCT | Ensures TTL-level input compatibility and similar drive characteristics. |
| Package | SO14 | SO14 | Same footprint allows drop-in board placement compatibility. |
| Mounting Type | Surface mount | Surface mount | Both are SMD devices suitable for the same assembly processes. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | Confirms both parts are rated for industrial temperature environments. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | 74HCT08D | 74HCT14D |
|---|---|---|
| Series | 74HCT | 74HCT |
| Part Status | Obsolete | Active |
| Logic Type | AND Gate | Inverter |
| Number of Circuits | 4 | 6 |
| Number of Inputs | 2 | 1 |
| Voltage - Supply | 4.5V ~ 5.5V | 4.5V ~ 5.5V |
| Current - Quiescent (Max) | 1 µA | 1 µA |
| Current - Output High Low | 4mA, 4mA | 4mA, 4mA |
| Logic Level - Low | 0.8V | - |
| Logic Level - High | 2V | - |
| Max Propagation Delay @ V Max CL | 18ns @ 5.5V, 50pF | 31ns @ 5.5V, 50pF |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
| Features | - | Schmitt Trigger |
The 74HCT14D contains six independent Schmitt-trigger inverters, providing hysteresis for slow or noisy input signals. The 74HCT08D contains four independent 2-input AND gates with standard CMOS input thresholds. They are not functionally interchangeable because one inverts and shapes signals while the other performs logical AND operations.
No. Although both devices are commonly offered in a 14-pin SO package, their pin functions differ. The 74HCT14D uses all 14 pins for six inverters (VCC on pin 14, GND on pin 7, with 12 signal pins). The 74HCT08D uses 4 AND gates, with VCC on pin 14, GND on pin 7, and the remaining pins assigned to gate inputs and outputs. A direct drop-in replacement is not possible without verifying the specific pinout in the manufacturer datasheet.
The 74HCT14D is suitable for switch debouncing because its Schmitt-trigger inputs provide defined hysteresis thresholds, which clean up slow rising and falling edges. The 74HCT08D does not have Schmitt-trigger inputs, so it is not recommended for direct mechanical switch debouncing without additional external circuitry.
Yes. Both are members of the 74HCT family, which features TTL-compatible input voltage thresholds when operated at 5 V. This allows them to interface with TTL logic levels while providing CMOS output drive characteristics. Exact threshold values should be confirmed in the respective manufacturer datasheet.
Typical propagation delay for the 74HCT14D is approximately 11 ns to 19 ns depending on supply voltage and load, while the 74HCT08D typically exhibits propagation delays in the range of 10 ns to 18 ns under similar conditions. These values vary by manufacturer and operating conditions, so the specific datasheet must be consulted for guaranteed limits.
Yes. Both devices are specified for a nominal 5 V supply and are compatible with the 74HCT logic family. They can share the same regulated 5 V rail provided that decoupling capacitors are placed near each device and the total load current remains within the supply's capability.
Both are commonly available in SO14 (D) packages, as indicated by the "D" suffix. However, availability may differ by manufacturer and distributor. Package options such as TSSOP, DIP, or other variants may exist for one device but not the other, so the specific orderable part number should be verified with the manufacturer or authorized distributor.