AD7495BRZ
아날로그 디바이스(주)
- Lifecycle
- Active
- Stock
- 2494 PCS
- Package
- SOIC-8
- Series
- 데이터 수집 - 아날로그 변환기(ADC)
AD7495BRZ과 AD7492AR에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The AD7495BRZ and AD7492AR are both 12-bit successive-approximation ADCs from Analog Devices sharing a compatible SOIC-8 footprint and similar supply requirements, making the AD7495BRZ a viable functional replacement candidate for the AD7492AR in many designs. However, the two parts differ in maximum sampling throughput and interface timing characteristics, so engineers should validate SPI clock timing and throughput margins against the target application before substituting.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD7495BRZ | AD7492AR | Why it matters |
|---|---|---|---|
| Resolution | 12 bit | 12 bit | Both converters provide 12-bit resolution, so quantization step size and nominal dynamic range are equivalent. |
| Sampling Rate | 1 MSPS | 1.25 MSPS | The maximum throughput differs; the AD7492AR can sample faster, which affects achievable signal bandwidth and timing margin in a system. |
| Number of Input Channels | 1 | 1 | Both are single-channel ADCs, so neither offers multiplexed multi-channel acquisition on-chip. |
| Input Type | Single-ended | Single-ended | Single-ended inputs simplify front-end design but offer less common-mode rejection than differential inputs. |
| Supply Voltage | 5 V | 5 V | Both operate from a 5 V supply, so power rail requirements are compatible for direct substitution. |
| Interface | SPI / QSPI / MICROWIRE / DSP compatible serial | Parallel | The digital interface differs fundamentally: the AD7495BRZ uses a serial bus while the AD7492AR uses a parallel bus, requiring different host connections and pinouts. |
| Package / Mounting | 8-Lead SOIC (surface mount) | 28-Lead TSSOP (surface mount) | Different package footprints and pin counts mean the parts are not drop-in replacements on an existing PCB. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Identical industrial temperature ratings allow use in the same environmental conditions. |
| Power Consumption | Approx. 4.5 mW at 5 V, 1 MSPS | Approx. 15 mW at 5 V, 1.25 MSPS | Lower power dissipation in the AD7495BRZ benefits thermally constrained or battery-influenced designs. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD7495BRZ | AD7492AR |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Number of Bits | 12 | 12 |
| Sampling Rate(Per Second) | 1M | 1M |
| Number of Inputs | 1 | 1 |
| Input Type | Single Ended | Single Ended |
| Data Interface | SPI, DSP | Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External | Internal |
| Voltage - Supply, Analog | 2.7V ~ 5.25V | 2.7V ~ 5.25V |
| Voltage - Supply, Digital | 2.7V ~ 5.25V | 2.7V ~ 5.25V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The AD7495BRZ is a 12-bit successive-approximation ADC with a serial (SPI/QSPI/MICROWIRE/DSP-compatible) interface, supplied in an 8-lead SOIC package. The AD7492AR is a 12-bit SAR ADC with a parallel (byte-wide) interface, supplied in a 24-lead SOIC package. Both operate from a single 2.7 V to 5.25 V supply and offer a 1 MSPS throughput rate, but they differ in digital interface, package, and pin count.
No. The AD7495BRZ uses an 8-lead SOIC (R-8) package, while the AD7492AR uses a 24-lead SOIC (R-24) package. The pin counts, pin functions, and PCB land patterns differ, so they are not drop-in replacements and require different board layouts.
Yes. Both are 12-bit successive-approximation ADCs specified for a 1 MSPS maximum throughput rate, allowing direct comparison of resolution and sampling speed when selecting between them.
The AD7495BRZ provides a serial interface compatible with SPI, QSPI, MICROWIRE, and DSP systems, which minimizes pin count and board routing. The AD7492AR provides a parallel byte-wide interface for direct connection to a microprocessor or DSP data bus, which can simplify interfacing in parallel-bus systems at the cost of more pins.
Both the AD7495BRZ and AD7492AR operate from a single supply in the 2.7 V to 5.25 V range. Each device requires an external reference voltage to set the full-scale input range; the reference is not internally generated, so the system design must provide a suitable external reference.
Both devices are specified for the industrial temperature range of −40 °C to +85 °C, making them suitable for industrial and embedded applications requiring extended temperature operation.
Not directly. Because the AD7495BRZ uses a serial interface in an 8-lead package and the AD7492AR uses a parallel interface in a 24-lead package, substituting one for the other requires a PCB redesign, changes to the digital interface firmware or logic, and revalidation of the analog front end against the datasheet specifications.