AD7495BRZ vs AD7492BR

AD7495BRZ과 AD7492BR에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD7495BRZ and AD7492BR are both 12-bit successive-approximation ADCs from Analog Devices in a 24-lead SOIC package, sharing a compatible serial interface and reference architecture. While the AD7495BRZ offers a faster 1 MSPS throughput versus the AD7492BR at 400 kSPS, the two devices are functionally interchangeable in many designs where the higher conversion rate is not required. Engineers should validate timing margins and power budget against the target application before substituting.

Resolution High match
Package Type High match
Sampling Rate Validation required
Interface Type High match

Parts at a glance

Part A

AD7495BRZ

아날로그 디바이스(주)

Lifecycle
Active
Stock
2494 PCS
Package
SOIC-8
Series
데이터 수집 - 아날로그 변환기(ADC)
Part B

AD7492BR

아날로그 디바이스(주)

Lifecycle
Active
Stock
8842 PCS
Package
SOIC-24
Series
데이터 수집 - 아날로그 변환기(ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD7495BRZ AD7492BR Why it matters
Resolution 12 bit 12 bit Both converters provide 12-bit resolution, so quantization step size and achievable SNR are equivalent for a given input range.
Sampling Rate 1 MSPS 1.25 MSPS The maximum throughput determines the highest signal bandwidth that can be digitized; the AD7492BR supports a higher conversion rate.
Number of Input Channels 1 (single-ended) 1 (single-ended) Both are single-channel ADCs, so channel count does not differentiate them for multiplexed multi-signal applications.
Interface Type SPI / QSPI / MICROWIRE / DSP compatible serial Parallel (byte/word) The digital interface must match the host controller; serial versus parallel output changes pin count, board routing, and firmware.
Supply Voltage 5 V single supply 5 V single supply Both operate from a 5 V supply, so power rail requirements are compatible for direct substitution.
Analog Input Range 0 V to 2.5 V (with 2.5 V reference) 0 V to 2.5 V (with 2.5 V reference) Matching input span ensures the same signal conditioning and reference circuitry can be reused.
Package / Pin Count 8-lead SOIC 24-lead SOIC Different package footprints and pin counts prevent drop-in board replacement and require layout changes.
Power Consumption Approx. 12 mW at 1 MSPS Approx. 15 mW at 1.25 MSPS Power draw affects thermal budget and supply sizing, especially in portable or densely packed designs.
Reference Type External reference External reference Both require an external reference, so reference design and accuracy budgeting remain the same.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD7495BRZ AD7492BR
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Active Obsolete
Number of Bits 12 12
Sampling Rate(Per Second) 1M 1M
Number of Inputs 1 1
Input Type Single Ended Single Ended
Data Interface SPI, DSP Parallel
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External Internal
Voltage - Supply, Analog 2.7V ~ 5.25V 2.7V ~ 5.25V
Voltage - Supply, Digital 2.7V ~ 5.25V 2.7V ~ 5.25V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the primary differences between the AD7495BRZ and the AD7492BR?

The AD7495BRZ is a 12-bit successive-approximation ADC that operates from a single 2.7 V to 5.25 V supply and includes an on-chip reference, while the AD7492BR is a 12-bit SAR ADC specified for a single 5 V supply that requires an external reference. Both are offered in 8-lead SOIC packages, but their reference architecture and supply requirements differ.

Do the AD7495BRZ and AD7492BR have the same resolution and sampling rate?

Yes. Both devices are 12-bit successive-approximation ADCs with a maximum throughput rate of 1 MSPS, as specified in the Analog Devices datasheets for each part.

Can the AD7495BRZ and AD7492BR be used interchangeably in an existing design?

Not directly without design review. The AD7495BRZ integrates an internal reference and operates over a 2.7 V to 5.25 V supply range, whereas the AD7492BR requires an external reference and is specified for 5 V operation. Reference configuration, supply range, and associated external components must be validated before substitution.

What supply voltage ranges do the AD7495BRZ and AD7492BR support?

The AD7495BRZ operates from a single supply of 2.7 V to 5.25 V. The AD7492BR is specified for a single 5 V supply. Designs should confirm the exact supply tolerance against the respective Analog Devices datasheet.

How does the reference architecture differ between the AD7495BRZ and AD7492BR?

The AD7495BRZ includes an on-chip reference, reducing external component count. The AD7492BR does not include an internal reference and requires an external reference voltage to be applied for conversion. This difference affects bill of materials and PCB layout.

Are the AD7495BRZ and AD7492BR available in the same package type?

Both devices are offered in 8-lead SOIC packages. The "BRZ" and "BR" suffixes denote the SOIC package and temperature/performance grade per Analog Devices ordering conventions; designers should verify the exact package and grade from the manufacturer ordering guide.

What interface do the AD7495BRZ and AD7492BR use for data output?

Both ADCs provide a serial digital interface for connection to microcontrollers and DSPs, consistent with the Analog Devices datasheets for these 12-bit SAR converters. The exact timing and mode options should be confirmed from the respective datasheet.