AD7656YSTZ vs AD7653ASTZRL

AD7656YSTZ과 AD7653ASTZRL에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The AD7656YSTZ and AD7653ASTZRL are not drop-in replacements for one another. The AD7656YSTZ is a six-channel simultaneous-sampling bipolar ADC in a 64-lead LQFP, while the AD7653ASTZRL is a single-channel bipolar ADC in a 48-lead LQFP. They differ in channel count, package footprint, and digital interface configuration, so a direct board-level substitution is not possible without redesign.

Different channel count Different package footprint Different digital interface Different conversion architecture

Parts at a glance

Part A

AD7656YSTZ

아날로그 디바이스(주)

Lifecycle
Active
Stock
7772 PCS
Package
LQFP-64
Series
데이터 수집 - 아날로그 변환기(ADC)
Part B

AD7653ASTZRL

아날로그 디바이스(주)

Lifecycle
Active
Stock
7144 PCS
Package
LQFP-48
Series
데이터 수집 - 아날로그 변환기(ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD7656YSTZ AD7653ASTZRL Why it matters
Number of ADC Channels 6 1 Determines how many independent analog signals can be sampled simultaneously; a 6-channel device cannot be replaced by a single-channel device in multi-channel acquisition systems.
Resolution 16 bits 16 bits Both provide 16-bit resolution, so precision and dynamic range are equivalent, which is favorable for substitutability.
Sampling Rate (max) 250 kSPS 1 MSPS The maximum throughput affects the highest signal frequency that can be captured; the AD7653 supports faster sampling, which may be required for higher-bandwidth signals.
Architecture SAR SAR Both use successive-approximation register architecture, giving similar latency and no pipeline delay, which supports functional equivalence.
Input Type Single-ended Single-ended Matching input configuration ensures the same signal conditioning and front-end circuitry can be reused.
Supply Voltage (Analog) 5 V 5 V Identical analog supply requirements simplify power design and allow the same voltage regulation to be shared.
Interface Parallel / Serial (SPI) Parallel / Serial (SPI) Compatible digital interfaces allow the same host controller and firmware communication path to be used.
Package LQFP-64 LQFP-48 Different package footprints and pin counts require PCB redesign, so the parts are not drop-in replacements.
Operating Temperature Range -40 °C to +125 °C -40 °C to +85 °C The wider temperature range of the AD7656 suits harsher environments; the AD7653 is limited to standard industrial conditions.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD7656YSTZ AD7653ASTZRL
Supplier - Analog Devices Inc.
Series iCMOS® PulSAR®
Part Status Active Obsolete
Number of Bits 16 16
Sampling Rate(Per Second) 250k 1M
Number of Inputs 6 1
Input Type Single Ended Pseudo-Differential
Data Interface SPI, Parallel, DSP SPI, Parallel, DSP
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 6 1
Architecture SAR SAR
Reference Type External, Internal External, Internal
Voltage - Supply, Analog 5V 5V
Voltage - Supply, Digital 5V 5V
Operating Temperature -40°C ~ 125°C -40°C ~ 85°C
Features Simultaneous Sampling, True Bipolar -

Frequently asked questions

What are the key architectural differences between the AD7656YSTZ and the AD7653ASTZRL?

The AD7656YSTZ is a 16-bit, 6-channel, simultaneous-sampling successive approximation register (SAR) analog-to-digital converter, while the AD7653ASTZRL is a 16-bit, single-channel, pseudo-differential SAR ADC. The AD7656YSTZ integrates six ADCs that sample simultaneously, making it suited for multiphase motor control and power monitoring, whereas the AD7653ASTZRL provides one channel with a higher throughput rate of up to 1 MSPS.

How do the sampling rates of the AD7656YSTZ and AD7653ASTZRL compare?

The AD7656YSTZ offers a maximum throughput of 250 kSPS per channel across its six simultaneous-sampling channels. The AD7653ASTZRL provides a maximum throughput of 1 MSPS on its single channel. The AD7653ASTZRL therefore delivers four times the per-channel conversion rate of the AD7656YSTZ.

Do the AD7656YSTZ and AD7653ASTZRL use the same package and pinout?

No. The AD7656YSTZ is supplied in a 64-lead LQFP package, while the AD7653ASTZRL is supplied in a 48-lead LQFP package. The two devices have different pin counts and pin functions, so they are not pin-compatible and cannot be interchanged on the same PCB land pattern without redesign.

What analog input configurations do the AD7656YSTZ and AD7653ASTZRL support?

The AD7656YSTZ provides six single-ended analog input channels that can also be configured as three true differential pairs, with a selectable input range of ±10 V or ±5 V. The AD7653ASTZRL provides a single pseudo-differential input with a selectable range of ±10 V, ±5 V, or 0 V to 10 V. The AD7656YSTZ is therefore better suited to multi-channel bipolar signal acquisition, while the AD7653ASTZRL targets single-channel high-speed acquisition.

What digital interfaces do the AD7656YSTZ and AD7653ASTZRL provide?

Both devices provide a parallel interface and a serial interface for connection to host processors or FPGAs. The AD7656YSTZ supports a high-speed parallel interface and a serial interface, and it includes a daisy-chain capability for cascading multiple converters. The AD7653ASTZRL supports a parallel interface and an SPI-compatible serial interface. The exact timing and word-length requirements should be confirmed against the respective manufacturer datasheets.

Can the AD7656YSTZ and AD7653ASTZRL operate from the same supply voltages?

Both devices use a 5 V analog supply and a separate digital supply that supports interfacing to 3 V or 5 V logic. The AD7656YSTZ additionally requires external reference and interface supply considerations for its six channels, while the AD7653ASTZRL integrates an on-chip reference. Designers should verify the exact supply and reference requirements in the manufacturer datasheets before finalizing a power architecture.

Which device is more appropriate for simultaneous multi-channel acquisition?

The AD7656YSTZ is the appropriate choice for simultaneous multi-channel acquisition because its six SAR converters sample all channels at the same instant, preserving phase relationships between signals. The AD7653ASTZRL, with a single channel, cannot perform simultaneous sampling across multiple inputs and would require external multiplexing and multiple devices to achieve comparable multi-channel synchronization.

Are the AD7656YSTZ and AD7653ASTZRL drop-in replacements for each other?

No. The two devices differ in channel count, throughput, package size, pinout, and input configuration. They are not drop-in replacements, and substituting one for the other requires a PCB redesign and revalidation of the analog front end, timing, and firmware against the manufacturer datasheets.