AD7656YSTZ
아날로그 디바이스(주)
- Lifecycle
- Active
- Stock
- 7772 PCS
- Package
- LQFP-64
- Series
- 데이터 수집 - 아날로그 변환기(ADC)
AD7656YSTZ과 AD7654AST에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The AD7656YSTZ and AD7654AST are not drop-in replacements for one another. The AD7656YSTZ is a 6-channel, 16-bit simultaneous-sampling bipolar ADC in a 64-lead LQFP package, while the AD7654AST is a 4-channel, 16-bit successive-approximation ADC in a 48-lead LQFP package. The differences in channel count, package footprint, and digital interface architecture require board-level redesign and preclude direct substitution.
아날로그 디바이스(주)
아날로그 디바이스(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD7656YSTZ | AD7654AST | Why it matters |
|---|---|---|---|
| Number of ADC Channels | 6 | 2 | Determines how many independent analog signals can be sampled simultaneously; a 6-channel device cannot be directly substituted where 2 channels suffice, and vice versa. |
| Resolution | 16 bits | 16 bits | Both provide 16-bit resolution, so precision and dynamic range are comparable for signal acquisition. |
| Sampling Rate (max) | 250 kSPS | 500 kSPS | Higher throughput affects the maximum signal bandwidth that can be captured; the AD7654AST can sample faster per channel. |
| Input Type | Single-ended (true bipolar) | Pseudo-differential | Input configuration affects how signals are connected and common-mode rejection; substitution may require circuit changes. |
| Supply Voltage | 5 V analog (AVDD), 5 V digital (DVDD) | 5 V analog (AVDD), 5 V digital (DVDD) | Matching supply requirements simplifies power-rail compatibility in a replacement design. |
| Interface | Parallel / Serial (SPI/QSPI/MICROWIRE/DSP) | Parallel / Serial (SPI/QSPI/MICROWIRE/DSP) | Compatible digital interfaces allow connection to the same host controller without protocol redesign. |
| Package | 64-lead LQFP | 48-lead LQFP | Different package footprints and pin counts prevent direct board-level drop-in replacement. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +85 °C | The wider temperature range of the AD7656YSTZ suits harsher environments; the AD7654AST is limited to standard industrial conditions. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD7656YSTZ | AD7654AST |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Series | iCMOS® | PulSAR® |
| Part Status | Active | Obsolete |
| Number of Bits | 16 | 16 |
| Sampling Rate(Per Second) | 250k | 500k |
| Number of A/D Converters | 6 | 1 |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 85°C |
| Number of Inputs | 6 | - |
| Input Type | Single Ended | - |
| Data Interface | SPI, Parallel, DSP | - |
| Configuration | S/H-ADC | - |
| Ratio - S / H: ADC | 1:1 | - |
| Architecture | SAR | - |
| Reference Type | External, Internal | - |
| Voltage - Supply, Analog | 5V | - |
| Voltage - Supply, Digital | 5V | - |
| Features | Simultaneous Sampling, True Bipolar | - |
The AD7656YSTZ is a 16-bit, 6-channel simultaneous-sampling SAR ADC in a 64-lead LQFP package, while the AD7654AST is a 16-bit, 4-channel simultaneous-sampling SAR ADC in a 48-lead LQFP package. The AD7656YSTZ provides six ADC channels versus four on the AD7654AST, and the two devices differ in package footprint and pin count, so they are not drop-in replacements for each other.
Yes. Both are 16-bit successive-approximation-register (SAR) analog-to-digital converters with simultaneous sampling, per Analog Devices datasheets. The primary differences are channel count, package, and related pinout rather than resolution or conversion architecture.
No. The AD7656YSTZ is a 64-lead LQFP device with six channels, and the AD7654AST is a 48-lead LQFP device with four channels. The differing package, pin count, and channel count prevent a direct PCB-level substitution without redesign and validation against the manufacturer datasheets.
The AD7656YSTZ is supplied in a 64-lead LQFP package, and the AD7654AST is supplied in a 48-lead LQFP package, according to Analog Devices documentation. The "YSTZ" and "AST" suffixes denote the respective package and temperature-grade variants.
The AD7656YSTZ provides six simultaneous-sampling ADC channels, and the AD7654AST provides four simultaneous-sampling ADC channels. This channel-count difference is a primary selection criterion when choosing between the two parts.
Yes. Both devices are 16-bit SAR analog-to-digital converters manufactured by Analog Devices. Their shared resolution and architecture allow similar signal-chain design approaches, but the channel count and package differences must be accounted for in layout and system design.
Designers should verify channel count, package footprint, pinout, supply and reference requirements, and digital interface timing against the official Analog Devices datasheets for the AD7656YSTZ and AD7654AST. Because the two parts differ in package and channel count, neither can be assumed interchangeable without full documentation review and validation.