AD8422ARZ
아날로그 디바이스(주)
- Lifecycle
- Active
- Stock
- 3872 PCS
- Package
- SOIC-8
- Series
- 선형 증폭기 - 계측기, 연산 증폭기, 완충 증폭기
AD8422ARZ과 AD8428BRZ-RL에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.
Replacement verdict
The AD8422ARZ and AD8428BRZ-RL are both precision instrumentation amplifiers from Analog Devices in the same SOIC-8 package, but they are not direct drop-in substitutes. The AD8428BRZ-RL offers substantially higher gain (fixed G = 2000) and far greater bandwidth, while the AD8422ARZ is a programmable-gain (G = 1 to 1000) amplifier with lower supply current. Designers must validate gain configuration, bandwidth, and noise requirements before substituting one for the other.
아날로그 디바이스(주)
아날로그 디바이스(주)
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8422ARZ | AD8428BRZ-RL | Why it matters |
|---|---|---|---|
| Number of Amplifiers | 1 | 1 | Both are single-channel instrumentation amplifiers, so channel count is equivalent for substitutability. |
| Gain Range | 1 to 1000 (set by external resistor) | Fixed gain of 2000 | The AD8422 offers user-programmable gain via an external resistor, while the AD8428 has a fixed gain of 2000; this fundamentally changes circuit design and application fit. |
| Input Offset Voltage (max) | 70 µV | 15 µV | Lower offset voltage improves DC accuracy; the AD8428 provides tighter offset performance for precision measurement. |
| Input Voltage Noise (1 kHz, typ) | 8 nV/√Hz | 1.5 nV/√Hz | Lower input noise is critical for resolving small signals; the AD8428 is significantly quieter, benefiting low-level sensor applications. |
| Bandwidth (at rated gain) | 2.2 MHz (G = 1) | 3.5 MHz (G = 2000) | Bandwidth determines the maximum signal frequency the amplifier can handle; the AD8428 maintains wide bandwidth even at high fixed gain. |
| Supply Voltage Range | ±2.3 V to ±18 V (4.6 V to 36 V) | ±4 V to ±18 V (8 V to 36 V) | The AD8422 supports lower supply voltages, enabling use in lower-power or single-supply systems where the AD8428 cannot operate. |
| Supply Current (typ) | 300 µA | 6.5 mA | Quiescent current affects power budget; the AD8422 is far more power-efficient, while the AD8428 consumes more for its higher performance. |
| CMRR (min, G = 1000) | 110 dB | 130 dB | Higher common-mode rejection improves accuracy in noisy environments; the AD8428 offers superior CMRR for demanding precision applications. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Both share the same industrial temperature range, so environmental compatibility is equivalent. |
| Package | 8-Lead SOIC | 8-Lead SOIC | Identical package and pinout simplify board-level substitution, though electrical differences still require design review. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8422ARZ | AD8428BRZ-RL |
|---|---|---|
| Supplier | - | Analog Devices Inc. |
| Part Status | Active | Active |
| Amplifier Type | Instrumentation | Instrumentation |
| Number of Circuits | 1 | 1 |
| Slew Rate | 0.8V/µs | 50V/µs |
| -3 dB Bandwidth | 2.2 MHz | 3.5 MHz |
| Current - Input Bias | 500 pA | 200 nA |
| Voltage - Input Offset | 60 µV | 25 µV |
| Supply Current | 300µA | 6.5mA |
| Current - Output / Channel | 20 mA | 30 mA |
| Voltage - Supply Span(Min) | 4.6 V | 8 V |
| Voltage - Supply Span(Max) | 36 V | 36 V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
| Output Type | Rail-to-Rail | - |
The AD8422ARZ is a high precision, low power, low noise instrumentation amplifier optimized for wide dynamic range signal conditioning. The AD8428BRZ-RL is a low noise, high speed instrumentation amplifier with a fixed gain of 2000, designed for applications requiring high gain and fast settling. The AD8422 offers pin-selectable gains from 1 to 1000, while the AD8428 provides a fixed gain of 2000.
No. The AD8422ARZ is supplied in an 8-lead SOIC package, while the AD8428BRZ-RL is supplied in an 8-lead SOIC package with a different pin configuration. The AD8428 includes an internal gain-setting network and additional filter pins, so the two devices are not pin-compatible and cannot be interchanged without PCB redesign.
The AD8422ARZ uses an external resistor to set gain from 1 to 1000, providing design flexibility. The AD8428BRZ-RL has a fixed gain of 2000 set internally, which eliminates external gain resistors and improves gain accuracy and drift performance but removes user adjustability.
The AD8428BRZ-RL specifies an input voltage noise density of 1.5 nV/√Hz at 1 kHz, while the AD8422ARZ specifies 8 nV/√Hz at 1 kHz. The AD8428 therefore provides lower input-referred noise, which is advantageous for low-level signal amplification.
The AD8422ARZ provides a bandwidth of 2.2 MHz at gain of 1 and approximately 2.2 kHz at gain of 1000. The AD8428BRZ-RL provides a bandwidth of 3.5 MHz at its fixed gain of 2000. The AD8428 therefore offers significantly higher bandwidth at high gain.
The AD8422ARZ operates from a single supply of 4.5 V to 36 V or dual supplies of ±2.25 V to ±18 V, with a typical supply current of 300 µA. The AD8428BRZ-RL operates from dual supplies of ±4 V to ±18 V and typically draws 6.5 mA. The AD8422 is therefore better suited for low-power applications.
The AD8428BRZ-RL is optimized for high-gain, low-noise applications due to its fixed gain of 2000, 1.5 nV/√Hz input noise, and 3.5 MHz bandwidth. The AD8422ARZ is better suited for applications requiring flexible gain settings, lower power consumption, and wider supply voltage range.