AD8497ARMZ vs AD8496ARMZ

AD8497ARMZ과 AD8496ARMZ에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8497ARMZ and AD8496ARMZ are functionally compatible thermocouple amplifier candidates, sharing the same package, supply range, and output configuration, with the primary distinction being the calibrated thermocouple type. The AD8497ARMZ is calibrated for K-type thermocouples, while the AD8496ARMZ is calibrated for J-type thermocouples, so substitution is viable only when the application's thermocouple type matches the device calibration.

Package Type High match
Supply Voltage Range High match
Output Type High match
Thermocouple Calibration Validation required

Parts at a glance

Part A

AD8497ARMZ

아날로그 디바이스(주)

Lifecycle
Active
Stock
6084 PCS
Package
MSOP-8
Series
커넥터 - 센서 및 탐지기 커넥터
Part B

AD8496ARMZ

아날로그 디바이스(주)

Lifecycle
Active
Stock
4651 PCS
Package
TSSOP-8
Series
커넥터 - 센서 및 탐지기 커넥터

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8497ARMZ AD8496ARMZ Why it matters
Sensor Type J-Type Thermocouple K-Type Thermocouple Determines which thermocouple the amplifier is calibrated for; using the wrong type produces large temperature measurement errors.
Output Voltage at 25°C (Ambient) 5 mV/°C nominal (J-type curve) 5 mV/°C nominal (K-type curve) Both provide a 5 mV/°C output, but the internal cold-junction compensation curve differs, so the actual output voltage at a given temperature differs between the two parts.
Cold-Junction Compensation Range Optimized for J-type thermocouple characteristics Optimized for K-type thermocouple characteristics The compensation network is matched to the specific thermocouple's Seebeck curve; mismatch causes systematic temperature offset errors.
Supply Voltage Range 2.7 V to 18 V (single supply) 2.7 V to 18 V (single supply) Identical supply range means both parts can be used in the same power architecture without redesign.
Supply Current ~180 µA typical ~180 µA typical Low, matched quiescent current supports battery-powered and low-power instrumentation in either variant.
Package 8-Lead MSOP (RMZ) 8-Lead MSOP (RMZ) Same footprint and pinout allow drop-in board replacement without layout changes.
Operating Temperature Range −40°C to +125°C −40°C to +125°C Identical industrial temperature rating ensures equivalent environmental robustness.
Output Type Analog voltage (ratiometric to °C) Analog voltage (ratiometric to °C) Both output an analog voltage proportional to temperature, so downstream ADC and signal-chain design is unchanged.
Pin Configuration Standard AD849x pinout (V+, V−, +IN, −IN, REF, OUT, etc.) Standard AD849x pinout (V+, V−, +IN, −IN, REF, OUT, etc.) Identical pinout enables direct substitution on an existing PCB.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8497ARMZ AD8496ARMZ
Supplier - Analog Devices Inc.
Part Status Active Active
Type Thermocouple Amplifier Thermocouple Amplifier
Input Type Differential Differential
Output Type Analog Analog
Supply Current 250 µA 180 µA
Operating Temperature 25°C ~ 100°C -40°C ~ 125°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the AD8497ARMZ and AD8496ARMZ?

The AD8497ARMZ and AD8496ARMZ are precision thermocouple amplifiers with cold junction compensation from Analog Devices, supplied in an 8-lead MSOP (RM) package. Both are members of the AD849x family of thermocouple amplifiers with an integrated temperature sensor for cold junction compensation.

What is the key difference between the AD8497ARMZ and AD8496ARMZ?

The AD8496ARMZ is trimmed for use with J-type thermocouples, while the AD8497ARMZ is trimmed for use with K-type thermocouples. The internal gain and offset are set to match the Seebeck coefficient of the respective thermocouple type, so the two devices are not interchangeable without accounting for thermocouple type.

Are the AD8497ARMZ and AD8496ARMZ pin-compatible?

Yes. Both devices are offered in the same 8-lead MSOP package and share the same pinout, so they are pin-compatible. However, pin compatibility does not mean functional interchangeability, because each part is calibrated for a different thermocouple type.

What supply voltage do the AD8497ARMZ and AD8496ARMZ require?

Both devices operate from a single supply of 2.7 V to 18 V, or from dual supplies of ±2.7 V to ±18 V, per the Analog Devices AD849x datasheet. The wide supply range allows operation from low-voltage systems as well as higher-voltage industrial rails.

What output configuration do the AD8497ARMZ and AD8496ARMZ provide?

Both parts provide a single-ended analog voltage output with a nominal scale of 5 mV/°C, referenced to the voltage applied at the reference pin. The output is designed to interface directly with an ADC, and the reference pin allows level shifting of the output.

Can the AD8497ARMZ be used with a J-type thermocouple or the AD8496ARMZ with a K-type thermocouple?

No. The AD8497ARMZ is trimmed for K-type thermocouples and the AD8496ARMZ is trimmed for J-type thermocouples. Using a device with the wrong thermocouple type introduces a gain mismatch and resulting measurement error, so each part should be paired with its intended thermocouple type.

What is the operating temperature range of the AD8497ARMZ and AD8496ARMZ?

Both devices are specified for the industrial temperature range of −40°C to +125°C, as stated in the Analog Devices AD849x datasheet. This range covers typical industrial thermocouple measurement applications.

Do the AD8497ARMZ and AD8496ARMZ include cold junction compensation?

Yes. Both devices integrate a temperature sensor for cold junction compensation, which removes the need for an external cold junction compensation network. This integrated compensation is a primary feature of the AD849x family.