AD8544AR vs AD8542AR-REEL7

AD8544AR과 AD8542AR-REEL7에 대한 심층 비교를 통해 두 제품의 사양 및 주요 특징에 대한 유용한 정보를 얻을 수 있습니다. RoHS 준수 여부, REACH 인증 상태, 시리즈, 장착 방식, 패키지 유형 및 기타 관련 특성을 포함한 중요한 요소들을 자세히 다룹니다. 두 제품의 차이점을 나란히 제시함으로써 부품 선택이 간소화되어 특정 용도에 가장 적합한 옵션을 쉽게 선택할 수 있습니다.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8544AR and AD8542AR-REEL7 are both quad and dual CMOS rail-to-rail operational amplifiers from the same AD854x family, sharing identical per-channel electrical characteristics, supply voltage range, and SOIC package family. The AD8544AR integrates four amplifiers in a 14-lead SOIC, while the AD8542AR-REEL7 provides two amplifiers in an 8-lead SOIC supplied on tape and reel. Because the channel count and package footprint differ, the AD8542AR-REEL7 is not a pin-for-pin drop-in for the AD8544AR, but it is a strong functional candidate where a dual amplifier in a smaller footprint satisfies the circuit requirement. Designers should confirm channel count, board footprint, and reel packaging needs before substitution.

Channel Count Validation required
Package Type Validation required
Amplifier Electrical Characteristics High match
Supply Voltage Range High match

Parts at a glance

Part A

AD8544AR

아날로그 디바이스(주)

Lifecycle
Active
Stock
1986 PCS
Package
SOIC-14
Series
선형 증폭기 - 계측기, 연산 증폭기, 완충 증폭기
Part B

AD8542AR-REEL7

아날로그 디바이스(주)

Lifecycle
Active
Stock
3749 PCS
Package
SOIC-8
Series
선형 증폭기 - 계측기, 연산 증폭기, 완충 증폭기

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8544AR AD8542AR-REEL7 Why it matters
Number of Amplifiers 4 (Quad) 2 (Dual) Determines how many independent op-amp channels are available in a single package; a quad and a dual are not directly interchangeable in a given circuit layout.
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V Defines the operating supply window; matching ranges ensure the part works in the same single-supply systems.
Input Offset Voltage (max) 6 mV 6 mV Sets the worst-case DC error at the input; identical values mean comparable precision in DC signal chains.
Input Bias Current (typ) 1 pA 1 pA Very low CMOS input bias current minimizes errors in high-impedance sensor and filter circuits; matching values preserve performance.
Gain Bandwidth Product 1 MHz 1 MHz Determines the achievable closed-loop bandwidth; identical GBW means similar AC response and stability behavior.
Slew Rate 0.92 V/µs 0.92 V/µs Limits large-signal transient response; matching slew rates ensure equivalent dynamic performance.
Supply Current per Amplifier (typ) 45 µA 45 µA Governs power consumption in battery-powered designs; equal per-amplifier current keeps power budgets consistent.
Input Voltage Noise Density 42 nV/√Hz 42 nV/√Hz Affects noise floor in low-level signal amplification; identical noise density preserves signal-to-noise performance.
Package Type 14-Lead SOIC 8-Lead SOIC Footprint and pin count differ, so the PCB layout must be redesigned; the parts are not drop-in replacements.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8544AR AD8542AR-REEL7
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Obsolete Obsolete
Amplifier Type General Purpose General Purpose
Number of Circuits 4 2
Output Type Rail-to-Rail Rail-to-Rail
Slew Rate 0.92V/µs 0.92V/µs
Gain Bandwidth Product 1 MHz 1 MHz
Current - Input Bias 4 pA 4 pA
Voltage - Input Offset 1 mV 1 mV
Supply Current 45µA (x4 Channels) 45µA (x2 Channels)
Current - Output / Channel 30 mA 30 mA
Voltage - Supply Span(Min) 2.7 V 2.7 V
Voltage - Supply Span(Max) 5.5 V 5.5 V
Operating Temperature -40°C ~ 125°C -40°C ~ 125°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the key differences between the AD8544AR and AD8542AR-REEL7?

The AD8544AR is a quad (four-channel) rail-to-rail CMOS operational amplifier in a 14-lead SOIC package, while the AD8542AR-REEL7 is a dual (two-channel) rail-to-rail CMOS op amp in an 8-lead SOIC package supplied on a 7-inch reel. Both share the same AD854x family core specifications, including 1 MHz gain bandwidth product and rail-to-rail input/output, but differ in channel count, package pinout, and packaging format.

Are the AD8544AR and AD8542AR-REEL7 electrically identical per channel?

Yes. Both devices are members of the AD854x family and share the same per-channel specifications, including a 1 MHz unity-gain bandwidth, rail-to-rail input and output swing, and single-supply operation from 2.7 V to 5.5 V. The primary differences are the number of integrated channels and the package/pinout.

Can the AD8542AR-REEL7 be used as a drop-in replacement for the AD8544AR?

No. The AD8544AR is a 14-lead quad device and the AD8542AR-REEL7 is an 8-lead dual device; they have different pin counts, pinouts, and PCB footprints. A direct drop-in substitution is not possible without a board redesign or an appropriate package adapter.

What supply voltage range do both the AD8544AR and AD8542AR-REEL7 support?

Both devices operate from a single supply of 2.7 V to 5.5 V, and they also support dual-supply operation within the corresponding total supply range. This makes them suitable for low-voltage, battery-powered, and 3 V/5 V mixed-signal systems.

What is the gain bandwidth product of the AD8544AR and AD8542AR-REEL7?

Both the AD8544AR and AD8542AR-REEL7 feature a unity-gain bandwidth of 1 MHz, which is a shared family specification of the AD854x series. This bandwidth is suitable for low-frequency signal conditioning, sensor interfacing, and general-purpose amplification.

Do the AD8544AR and AD8542AR-REEL7 have rail-to-rail input and output?

Yes. Both devices provide rail-to-rail input and output swing, allowing signals to approach both supply rails. This is beneficial in low-voltage single-supply designs where maximizing dynamic range is important.

What package and packaging format does each device use?

The AD8544AR is supplied in a 14-lead SOIC package in tube or standard reel quantities depending on the ordering code. The AD8542AR-REEL7 is supplied in an 8-lead SOIC package on a 7-inch tape-and-reel, which is suited to automated surface-mount assembly lines.

Which device should be selected for a design requiring four op-amp channels in a single package?

The AD8544AR should be selected when four independent op-amp channels are needed in one package, since it integrates four amplifiers in a 14-lead SOIC. The AD8542AR-REEL7 provides only two channels and would require two devices to achieve four channels, consuming additional board area.